Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

arch/arm/mach-omap2/Makefile

@@ -174,6 +174,7 @@ obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals

arch/arm/mach-omap2/clkt_dpll.c

@@ -211,7 +211,7 @@ void omap2_init_dpll_parent(struct clk *clk)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
@@ -257,7 +257,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap44xx()) {
+	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)

arch/arm/mach-omap2/clock33xx_data.c

@@ -1027,7 +1027,9 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"cefuse_fck",		&cefuse_fck,	CK_AM33XX),
 	CLK(NULL,	"clkdiv32k_ick",	&clkdiv32k_ick,	CK_AM33XX),
 	CLK(NULL,	"dcan0_fck",		&dcan0_fck,	CK_AM33XX),
+	CLK("481cc000.d_can",	NULL,		&dcan0_fck,	CK_AM33XX),
 	CLK(NULL,	"dcan1_fck",		&dcan1_fck,	CK_AM33XX),
+	CLK("481d0000.d_can",	NULL,		&dcan1_fck,	CK_AM33XX),
 	CLK(NULL,	"debugss_ick",		&debugss_ick,	CK_AM33XX),
 	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk,	CK_AM33XX),
 	CLK("davinci-mcasp.0",  NULL,           &mcasp0_fck,    CK_AM33XX),

arch/arm/mach-omap2/dpll3xxx.c

@@ -311,7 +311,7 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
 	 * Set jitter correction. No jitter correction for OMAP4 and 3630
 	 * since freqsel field is no longer present
 	 */
-	if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+	if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
 		v = __raw_readl(dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
@@ -471,7 +471,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 			return -EINVAL;
 
 		/* No freqsel on OMAP4 and OMAP3630 */
-		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+		if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			if (!freqsel)

arch/arm/mach-omap2/io.c

@@ -524,6 +524,8 @@ void __init am33xx_init_early(void)
 	am33xx_voltagedomains_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
+	am33xx_hwmod_init();
+	omap_hwmod_init_postsetup();
 	am33xx_clk_init();
 }
 #endif

arch/arm/mach-omap2/omap_hwmod.c

@@ -149,8 +149,10 @@
 #include "powerdomain.h"
 #include "cm2xxx_3xxx.h"
 #include "cminst44xx.h"
+#include "cm33xx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
+#include "prm33xx.h"
 #include "prminst44xx.h"
 #include "mux.h"
 #include "pm.h"
@@ -867,6 +869,26 @@ static void _omap4_enable_module(struct omap_hwmod *oh)
 				   oh->prcm.omap4.clkctrl_offs);
 }
 
+/**
+ * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Enables the PRCM module mode related to the hwmod @oh.
+ * No return value.
+ */
+static void _am33xx_enable_module(struct omap_hwmod *oh)
+{
+	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+		return;
+
+	pr_debug("omap_hwmod: %s: %s: %d\n",
+		 oh->name, __func__, oh->prcm.omap4.modulemode);
+
+	am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst,
+				oh->clkdm->clkdm_offs,
+				oh->prcm.omap4.clkctrl_offs);
+}
+
 /**
  * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
  * @oh: struct omap_hwmod *
@@ -893,6 +915,31 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 					     oh->prcm.omap4.clkctrl_offs);
 }
 
+/**
+ * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to enter slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully enters
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_idle() function.
+ */
+static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return 0;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst,
+					     oh->clkdm->clkdm_offs,
+					     oh->prcm.omap4.clkctrl_offs);
+}
+
 /**
  * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
  * @oh: struct omap_hwmod *oh
@@ -1613,6 +1660,36 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
 	return 0;
 }
 
+/**
+ * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
+ * @oh: struct omap_hwmod *
+ *
+ * Disable the PRCM module mode related to the hwmod @oh.
+ * Return EINVAL if the modulemode is not supported and 0 in case of success.
+ */
+static int _am33xx_disable_module(struct omap_hwmod *oh)
+{
+	int v;
+
+	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
+
+	am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
+				 oh->prcm.omap4.clkctrl_offs);
+
+	if (_are_any_hardreset_lines_asserted(oh))
+		return 0;
+
+	v = _am33xx_wait_target_disable(oh);
+	if (v)
+		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+			oh->name);
+
+	return 0;
+}
+
 /**
  * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
  * @oh: struct omap_hwmod *
@@ -2548,6 +2625,33 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 					      oh->prcm.omap4.clkctrl_offs);
 }
 
+/**
+ * _am33xx_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
+{
+	if (!oh || !oh->clkdm)
+		return -EINVAL;
+
+	if (oh->flags & HWMOD_NO_IDLEST)
+		return 0;
+
+	if (!_find_mpu_rt_port(oh))
+		return 0;
+
+	/* XXX check module SIDLEMODE, hardreset status */
+
+	return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst,
+					      oh->clkdm->clkdm_offs,
+					      oh->prcm.omap4.clkctrl_offs);
+}
+
 /**
  * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
  * @oh: struct omap_hwmod * to assert hardreset
@@ -2679,6 +2783,72 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
 				oh->prcm.omap4.rstctrl_offs);
 }
 
+/**
+ * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to assert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_assert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri.  Only
+ * intended for use as an soc_ops function pointer.  Passes along the
+ * return value from am33xx_prminst_assert_hardreset().  XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
+				   struct omap_hwmod_rst_info *ohri)
+
+{
+	return am33xx_prm_assert_hardreset(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs);
+}
+
+/**
+ * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to deassert hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_deassert_hardreset() with parameters extracted
+ * from the hwmod @oh and the hardreset line data @ohri.  Only
+ * intended for use as an soc_ops function pointer.  Passes along the
+ * return value from am33xx_prminst_deassert_hardreset().  XXX This
+ * function is scheduled for removal when the PRM code is moved into
+ * drivers/.
+ */
+static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
+				     struct omap_hwmod_rst_info *ohri)
+{
+	if (ohri->st_shift)
+		pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
+		       oh->name, ohri->name);
+
+	return am33xx_prm_deassert_hardreset(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs,
+				oh->prcm.omap4.rstst_offs);
+}
+
+/**
+ * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args
+ * @oh: struct omap_hwmod * to test hardreset
+ * @ohri: hardreset line data
+ *
+ * Call am33xx_prminst_is_hardreset_asserted() with parameters
+ * extracted from the hwmod @oh and the hardreset line data @ohri.
+ * Only intended for use as an soc_ops function pointer.  Passes along
+ * the return value from am33xx_prminst_is_hardreset_asserted().  XXX
+ * This function is scheduled for removal when the PRM code is moved
+ * into drivers/.
+ */
+static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
+					struct omap_hwmod_rst_info *ohri)
+{
+	return am33xx_prm_is_hardreset_asserted(ohri->rst_shift,
+				oh->clkdm->pwrdm.ptr->prcm_offs,
+				oh->prcm.omap4.rstctrl_offs);
+}
+
 /* Public functions */
 
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
@@ -3678,6 +3848,14 @@ void __init omap_hwmod_init(void)
 		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
+	} else if (soc_is_am33xx()) {
+		soc_ops.enable_module = _am33xx_enable_module;
+		soc_ops.disable_module = _am33xx_disable_module;
+		soc_ops.wait_target_ready = _am33xx_wait_target_ready;
+		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
+		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else {
 		WARN(1, "omap_hwmod: unknown SoC type\n");
 	}