sugar/linux
1
0
Fork 0
Code Activity

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Browse Source 
Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is a smaller update than the past few times, but with just over
  500 non-merge changesets still dwarfes the rest of the SoC tree.

  Three new SoC platforms get added, each one a follow-up to an existing
  product, and added here in combination with a reference platform:

   - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging
     processor:

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html

   - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics
     Applications":

       https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html

   - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC:

       https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X

  These are actual commercial products we now support with an in-kernel
  device tree source file:

   - Bosch Guardian is a product made by Bosch Power Tools GmbH, based
     on the Texas Instruments AM335x chip

   - Winterland IceBoard is a Texas Instruments AM3874 based machine
     used in telescopes at the south pole and elsewhere, see commit
     d031773169 for some pointers:

   - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500
     baseboard management controller. This is for running on the BMC.

   - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch
     used in airplanes.

   - Phicomm K3 is a WiFi router based on Broadcom bcm47094

   - Methode Electronics uDPU FTTdp distribution point unit

   - X96 Max, a generic TV box based on Amlogic G12a (S905X2)

   - NVIDIA Shield TV (Darcy) based on Tegra210

  And then there are several new SBC, evaluation, development or modular
  systems that we add:

   - Three new Rockchips rk3399 based boards:
       - FriendlyElec NanoPC-T4 and NanoPi M4
       - Radxa ROCK Pi 4

   - Five new i.MX6 family SoM modules and boards for industrial
     products:
       - Logic PD i.MX6QD SoM and evaluation baseboad
       - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL
       - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module

   - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357
     microcontroller

   - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system
     in 96boards form factor

   - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual
     platform for corresponding to the latest "fast model"

   - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit
     and 64-bit mode.

   - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards
     enterprise form factor

   - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108

  For already supported boards and SoCs, we often add support for new
  devices after merging the drivers. This time, the largest changes
  include updates for

   - STMicroelectronics stm32mp1, which was now formally launched last
     week

   - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip

   - Action Semi S700

   - TI AM654x, their recently merged 64-bit SoC from the OMAP family

   - Various Amlogic Meson SoCs

   - Mediatek MT2712

   - NVIDIA Tegra186 and Tegra210

   - The ancient NXP lpc32xx family

   - Samsung s5pv210, used in some older mobile phones

  Many other chips see smaller updates and bugfixes beyond that"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits)
  ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4
  dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
  ARM: dts: am335x: switch to use phy-gmii-sel
  ARM: dts: am4372: switch to use phy-gmii-sel
  ARM: dts: dm814x: switch to use phy-gmii-sel
  ARM: dts: dra7: switch to use phy-gmii-sel
  arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU4
  ARM: dts: exynos: Add support for secondary DAI to Odroid XU3
  ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite
  ARM: dts: exynos: Add stdout path property to Arndale board
  ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU
  ARM: dts: exynos: Enable ADC on Odroid HC1
  arm64: dts: sprd: Remove wildcard compatible string
  arm64: dts: sprd: Add SC27XX fuel gauge device
  arm64: dts: sprd: Add SC2731 charger device
  arm64: dts: sprd: Add ADC calibration support
  arm64: dts: sprd: Remove PMIC INTC irq trigger type
  arm64: dts: rockchip: Enable tsadc device on rock960
  ARM: dts: rockchip: add chosen node on veyron devices
  ...
This commit is contained in:
Linus Torvalds
2019-03-06 09:36:37 -08:00
parent aebbfafc74 a3238924a8
commit 6ad63dec9c
539 changed files with 21301 additions and 2862 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/arm/amlogic.txt
View File

@@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,s400" (Meson axg a113d)
- "amlogic,u200" (Meson g12a s905d2)
- "amediatech,x96-max" (Meson g12a s905x2)
Amlogic Meson Firmware registers Interface
------------------------------------------

6
Documentation/devicetree/bindings/arm/armadeus.txt
View File

@@ -1,6 +0,0 @@
Armadeus i.MX Platforms Device Tree Bindings
-----------------------------------------------
APF51: i.MX51 based module.
Required root node properties:
- compatible = "armadeus,imx51-apf51", "fsl,imx51";

4
Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
View File

@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
Required root node properties:
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
Raspberry Pi 3 Model A+
Required root node properties:
compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
Raspberry Pi 3 Model B
Required root node properties:
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";

6
Documentation/devicetree/bindings/arm/bhf.txt
View File

@@ -1,6 +0,0 @@
Beckhoff Automation Platforms Device Tree Bindings
--------------------------------------------------
CX9020 Embedded PC
Required root node properties:
- compatible = "bhf,cx9020", "fsl,imx53";

25
Documentation/devicetree/bindings/arm/compulab-boards.txt
View File

@@ -1,25 +0,0 @@
CompuLab SB-SOM is a multi-module baseboard capable of carrying:
- CM-T43
- CM-T54
- CM-QS600
- CL-SOM-AM57x
- CL-SOM-iMX7
modules with minor modifications to the SB-SOM assembly.
Required root node properties:
- compatible = should be "compulab,sb-som"
Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
Freescale i.MX7 ARM Cortex-A7 System-on-Chip.
Required root node properties:
- compatible = "compulab,cl-som-imx7", "fsl,imx7d";
Compulab SBC-iMX7 is a single board computer based on the
Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
the CL-SOM-iMX7 System-on-Module providing most of the functions,
and SB-SOM-iMX7 carrier board providing additional peripheral
functions and connectors.
Required root node properties:
- compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";

16
Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt Normal file
View File

@@ -0,0 +1,16 @@
Freescale i.MX7ULP System Integration Module
----------------------------------------------
The system integration module (SIM) provides system control and chip configuration
registers. In this module, chip revision information is located in JTAG ID register,
and a set of registers have been made available in DGO domain for SW use, with the
objective to maintain its value between system resets.
Required properties:
- compatible: Should be "fsl,imx7ulp-sim".
- reg: Specifies base physical address and size of the register sets.
Example:
sim: sim@410a3000 {
compatible = "fsl,imx7ulp-sim", "syscon";
reg = <0x410a3000 0x1000>;
};

7
Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
View File

@@ -70,7 +70,10 @@ Clock bindings based on SCU Message Protocol
This binding uses the common clock binding[1].
Required properties:
- compatible: Should be "fsl,imx8qxp-clock".
- compatible: Should be one of:
"fsl,imx8qm-clock"
"fsl,imx8qxp-clock"
followed by "fsl,scu-clk"
- #clock-cells: Should be 1. Contains the Clock ID value.
- clocks: List of clock specifiers, must contain an entry for
each required entry in clock-names
@@ -137,7 +140,7 @@ firmware {
&lsio_mu1 1 3>;
clk: clk {
compatible = "fsl,imx8qxp-clk";
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
#clock-cells = <1>;
};

237
Documentation/devicetree/bindings/arm/fsl.txt
View File

@@ -1,237 +0,0 @@
Freescale i.MX Platforms Device Tree Bindings
-----------------------------------------------
i.MX23 Evaluation Kit
Required root node properties:
- compatible = "fsl,imx23-evk", "fsl,imx23";
i.MX25 Product Development Kit
Required root node properties:
- compatible = "fsl,imx25-pdk", "fsl,imx25";
i.MX27 Product Development Kit
Required root node properties:
- compatible = "fsl,imx27-pdk", "fsl,imx27";
i.MX28 Evaluation Kit
Required root node properties:
- compatible = "fsl,imx28-evk", "fsl,imx28";
i.MX51 Babbage Board
Required root node properties:
- compatible = "fsl,imx51-babbage", "fsl,imx51";
i.MX53 Automotive Reference Design Board
Required root node properties:
- compatible = "fsl,imx53-ard", "fsl,imx53";
i.MX53 Evaluation Kit
Required root node properties:
- compatible = "fsl,imx53-evk", "fsl,imx53";
i.MX53 Quick Start Board
Required root node properties:
- compatible = "fsl,imx53-qsb", "fsl,imx53";
i.MX53 Smart Mobile Reference Design Board
Required root node properties:
- compatible = "fsl,imx53-smd", "fsl,imx53";
i.MX6 Quad Armadillo2 Board
Required root node properties:
- compatible = "fsl,imx6q-arm2", "fsl,imx6q";
i.MX6 Quad SABRE Lite Board
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
i.MX6 Quad SABRE Smart Device Board
Required root node properties:
- compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
i.MX6 Quad SABRE Automotive Board
Required root node properties:
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
i.MX6SLL EVK board
Required root node properties:
- compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
i.MX6 Quad Plus SABRE Smart Device Board
Required root node properties:
- compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
i.MX6 Quad Plus SABRE Automotive Board
Required root node properties:
- compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
i.MX6 DualLite SABRE Smart Device Board
Required root node properties:
- compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
i.MX6 DualLite/Solo SABRE Automotive Board
Required root node properties:
- compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
i.MX6 SoloLite EVK Board
Required root node properties:
- compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
i.MX6 UltraLite 14x14 EVK Board
Required root node properties:
- compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
i.MX6 UltraLiteLite 14x14 EVK Board
Required root node properties:
- compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
i.MX6 ULZ 14x14 EVK Board
Required root node properties:
- compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
i.MX6 SoloX SDB Board
Required root node properties:
- compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
i.MX6 SoloX Sabre Auto Board
Required root node properties:
- compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
i.MX7 SabreSD Board
Required root node properties:
- compatible = "fsl,imx7d-sdb", "fsl,imx7d";
i.MX7ULP Evaluation Kit
Required root node properties:
- compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp";
Generic i.MX boards
-------------------
No iomux setup is done for these boards, so this must have been configured
by the bootloader for boards to work with the generic bindings.
i.MX27 generic board
Required root node properties:
- compatible = "fsl,imx27";
i.MX51 generic board
Required root node properties:
- compatible = "fsl,imx51";
i.MX53 generic board
Required root node properties:
- compatible = "fsl,imx53";
i.MX6q generic board
Required root node properties:
- compatible = "fsl,imx6q";
i.MX7ULP generic board
Required root node properties:
- compatible = "fsl,imx7ulp";
Freescale Vybrid Platform Device Tree Bindings
----------------------------------------------
For the Vybrid SoC familiy all variants with DDR controller are supported,
which is the VF5xx and VF6xx series. Out of historical reasons, in most
places the kernel uses vf610 to refer to the whole familiy.
The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
core support.
Required root node compatible property (one of them):
- compatible = "fsl,vf500";
- compatible = "fsl,vf510";
- compatible = "fsl,vf600";
- compatible = "fsl,vf610";
- compatible = "fsl,vf610m4";
Freescale LS1021A Platform Device Tree Bindings
------------------------------------------------
Required root node compatible properties:
- compatible = "fsl,ls1021a";
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
----------------------------------------------------------------
LS1012A SoC
Required root node properties:
- compatible = "fsl,ls1012a";
LS1012A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
LS1012A ARMv8 based FRDM Board
Required root node properties:
- compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
LS1012A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
LS1043A SoC
Required root node properties:
- compatible = "fsl,ls1043a";
LS1043A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
LS1043A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
LS1046A SoC
Required root node properties:
- compatible = "fsl,ls1046a";
LS1046A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
LS1046A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
LS1088A SoC
Required root node properties:
- compatible = "fsl,ls1088a";
LS1088A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
LS1088A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
LS2080A SoC
Required root node properties:
- compatible = "fsl,ls2080a";
LS2080A ARMv8 based Simulator model
Required root node properties:
- compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
LS2080A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
LS2080A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
LS2088A SoC
Required root node properties:
- compatible = "fsl,ls2088a";
LS2088A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
LS2088A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";

232
Documentation/devicetree/bindings/arm/fsl.yaml Normal file
View File

@@ -0,0 +1,232 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/bindings/arm/fsl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale i.MX Platforms Device Tree Bindings
maintainers:
- Shawn Guo <shawnguo@kernel.org>
- Li Yang <leoyang.li@nxp.com>
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: i.MX23 based Boards
items:
- enum:
- fsl,imx23-evk
- olimex,imx23-olinuxino
- const: fsl,imx23
- description: i.MX25 Product Development Kit
items:
- enum:
- fsl,imx25-pdk
- const: fsl,imx25
- description: i.MX27 Product Development Kit
items:
- enum:
- fsl,imx27-pdk
- const: fsl,imx27
- description: i.MX28 based Boards
items:
- enum:
- fsl,imx28-evk
- i2se,duckbill
- i2se,duckbill-2
- technologic,imx28-ts4600
- const: fsl,imx28
- description: i.MX28 Duckbill 2 based Boards
items:
- enum:
- i2se,duckbill-2-485
- i2se,duckbill-2-enocean
- i2se,duckbill-2-spi
- const: i2se,duckbill-2
- const: fsl,imx28
- description: i.MX51 Babbage Board
items:
- enum:
- armadeus,imx51-apf51
- fsl,imx51-babbage
- technologic,imx51-ts4800
- const: fsl,imx51
- description: i.MX53 based Boards
items:
- enum:
- bhf,cx9020
- fsl,imx53-ard
- fsl,imx53-evk
- fsl,imx53-qsb
- fsl,imx53-smd
- const: fsl,imx53
- description: i.MX6Q based Boards
items:
- enum:
- fsl,imx6q-arm2
- fsl,imx6q-sabreauto
- fsl,imx6q-sabrelite
- fsl,imx6q-sabresd
- technologic,imx6q-ts4900
- technologic,imx6q-ts7970
- const: fsl,imx6q
- description: i.MX6QP based Boards
items:
- enum:
- fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- const: fsl,imx6qp
- description: i.MX6DL based Boards
items:
- enum:
- fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board
- fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
- technologic,imx6dl-ts4900
- technologic,imx6dl-ts7970
- ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board
- ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
- description: i.MX6SL based Boards
items:
- enum:
- fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
- const: fsl,imx6sl
- description: i.MX6SLL based Boards
items:
- enum:
- fsl,imx6sll-evk
- const: fsl,imx6sll
- description: i.MX6SX based Boards
items:
- enum:
- fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board
- fsl,imx6sx-sdb # i.MX6 SoloX SDB Board
- const: fsl,imx6sx
- description: i.MX6UL based Boards
items:
- enum:
- fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
- const: fsl,imx6ul
- description: i.MX6ULL based Boards
items:
- enum:
- fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
- const: fsl,imx6ull
- description: i.MX6ULZ based Boards
items:
- enum:
- fsl,imx6ulz-14x14-evk # i.MX6 ULZ 14x14 EVK Board
- const: fsl,imx6ull # This seems odd. Should be last?
- const: fsl,imx6ulz
- description: i.MX7D based Boards
items:
- enum:
- fsl,imx7d-sdb # i.MX7 SabreSD Board
- const: fsl,imx7d
- description:
Compulab SBC-iMX7 is a single board computer based on the
Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
the CL-SOM-iMX7 System-on-Module providing most of the functions,
and SB-SOM-iMX7 carrier board providing additional peripheral
functions and connectors.
items:
- const: compulab,sbc-imx7
- const: compulab,cl-som-imx7
- const: fsl,imx7d
- description: i.MX8QXP based Boards
items:
- enum:
- fsl,imx8qxp-mek # i.MX8QXP MEK Board
- const: fsl,imx8qxp
- description:
Freescale Vybrid Platform Device Tree Bindings
For the Vybrid SoC familiy all variants with DDR controller are supported,
which is the VF5xx and VF6xx series. Out of historical reasons, in most
places the kernel uses vf610 to refer to the whole familiy.
The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
core support.
items:
- enum:
- fsl,vf500
- fsl,vf510
- fsl,vf600
- fsl,vf610
- fsl,vf610m4
- description: LS1012A based Boards
items:
- enum:
- ebs-systart,oxalis
- fsl,ls1012a-rdb
- fsl,ls1012a-frdm
- fsl,ls1012a-qds
- const: fsl,ls1012a
- description: LS1021A based Boards
items:
- enum:
- fsl,ls1021a-moxa-uc-8410a
- fsl,ls1021a-qds
- fsl,ls1021a-twr
- const: fsl,ls1021a
- description: LS1043A based Boards
items:
- enum:
- fsl,ls1043a-rdb
- fsl,ls1043a-qds
- const: fsl,ls1043a
- description: LS1046A based Boards
items:
- enum:
- fsl,ls1046a-qds
- fsl,ls1046a-rdb
- const: fsl,ls1046a
- description: LS1088A based Boards
items:
- enum:
- fsl,ls1088a-qds
- fsl,ls1088a-rdb
- const: fsl,ls1088a
- description: LS2080A based Boards
items:
- enum:
- fsl,ls2080a-simu
- fsl,ls2080a-qds
- fsl,ls2080a-rdb
- const: fsl,ls2080a
- description: LS2088A based Boards
items:
- enum:
- fsl,ls2088a-qds
- fsl,ls2088a-rdb
- const: fsl,ls2088a
...

22
Documentation/devicetree/bindings/arm/i2se.txt
View File

@@ -1,22 +0,0 @@
I2SE Device Tree Bindings
-------------------------
Duckbill Board
Required root node properties:
- compatible = "i2se,duckbill", "fsl,imx28";
Duckbill 2 Board
Required root node properties:
- compatible = "i2se,duckbill-2", "fsl,imx28";
Duckbill 2 485 Board
Required root node properties:
- compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
Duckbill 2 EnOcean Board
Required root node properties:
- compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
Duckbill 2 SPI Board
Required root node properties:
- compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";

14
Documentation/devicetree/bindings/arm/mediatek.txt
View File

@@ -15,11 +15,12 @@ compatible: Must contain one of
"mediatek,mt6795"
"mediatek,mt6797"
"mediatek,mt7622"
"mediatek,mt7623" which is referred to MT7623N SoC
"mediatek,mt7623a"
"mediatek,mt7623"
"mediatek,mt7629"
"mediatek,mt8127"
"mediatek,mt8135"
"mediatek,mt8173"
"mediatek,mt8183"
Supported boards:
@@ -57,6 +58,9 @@ Supported boards:
- Reference board variant 1 for MT7622:
Required root node properties:
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
- Bananapi BPI-R64 for MT7622:
Required root node properties:
- compatible = "bananapi,bpi-r64", "mediatek,mt7622";
- Reference board for MT7623a with eMMC:
Required root node properties:
- compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
@@ -68,6 +72,9 @@ Supported boards:
- compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
- Bananapi BPI-R2 board:
- compatible = "bananapi,bpi-r2", "mediatek,mt7623";
- Reference board for MT7629:
Required root node properties:
- compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
- MTK mt8127 tablet moose EVB:
Required root node properties:
- compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
@@ -77,3 +84,6 @@ Supported boards:
- MTK mt8173 tablet EVB:
Required root node properties:
- compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
- Evaluation board for MT8183:
Required root node properties:
- compatible = "mediatek,mt8183-evb", "mediatek,mt8183";

10
Documentation/devicetree/bindings/arm/olimex.txt
View File

@@ -1,10 +0,0 @@
Olimex Device Tree Bindings
---------------------------
SAM9-L9260 Board
Required root node properties:
- compatible = "olimex,sam9-l9260", "atmel,at91sam9260";
i.MX23 Olinuxino Low Cost Board
Required root node properties:
- compatible = "olimex,imx23-olinuxino", "fsl,imx23";

238
Documentation/devicetree/bindings/arm/renesas.yaml Normal file
View File

@@ -0,0 +1,238 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/shmobile.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: Emma Mobile EV2
items:
- enum:
- renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual
- const: renesas,emev2
- description: RZ/A1H (R7S72100)
items:
- enum:
- renesas,genmai # Genmai (RTK772100BC00000BR)
- renesas,gr-peach # GR-Peach (X28A-M01-E/F)
- renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE)
- const: renesas,r7s72100
- description: RZ/A2 (R7S9210)
items:
- enum:
- renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE)
- const: renesas,r7s9210
- description: SH-Mobile AG5 (R8A73A00/SH73A0)
items:
- enum:
- renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT
- const: renesas,sh73a0
- description: R-Mobile APE6 (R8A73A40)
items:
- enum:
- renesas,ape6evm
- const: renesas,r8a73a4
- description: R-Mobile A1 (R8A77400)
items:
- enum:
- renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA
- const: renesas,r8a7740
- description: RZ/G1H (R8A77420)
items:
- const: renesas,r8a7742
- description: RZ/G1M (R8A77430)
items:
- enum:
# iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
- iwave,g20d
- const: iwave,g20m
- const: renesas,r8a7743
- items:
- enum:
# iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- iwave,g20m
- renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE)
- const: renesas,r8a7743
- description: RZ/G1N (R8A77440)
items:
- enum:
# iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
- iwave,g20d
- const: iwave,g20m
- const: renesas,r8a7744
- items:
- enum:
# iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
- iwave,g20m
- const: renesas,r8a7744
- description: RZ/G1E (R8A77450)
items:
- enum:
- iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
- renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE)
- const: renesas,r8a7745
- description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
items:
- const: iwave,g22d
- const: iwave,g22m
- const: renesas,r8a7745
- description: RZ/G1C (R8A77470)
items:
- enum:
- iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
- const: renesas,r8a77470
- description: RZ/G2M (R8A774A1)
items:
- const: renesas,r8a774a1
- description: RZ/G2E (R8A774C0)
items:
- enum:
- si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874)
- const: renesas,r8a774c0
- items:
- enum:
- si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875)
- const: si-linux,cat874
- const: renesas,r8a774c0
- description: R-Car M1A (R8A77781)
items:
- enum:
- renesas,bockw
- const: renesas,r8a7778
- description: R-Car H1 (R8A77790)
items:
- enum:
- renesas,marzen # Marzen (R0P7779A00010S)
- const: renesas,r8a7779
- description: R-Car H2 (R8A77900)
items:
- enum:
- renesas,lager # Lager (RTP0RC7790SEB00010S)
- renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
- const: renesas,r8a7790
- description: R-Car M2-W (R8A77910)
items:
- enum:
- renesas,henninger
- renesas,koelsch # Koelsch (RTP0RC7791SEB00010S)
- renesas,porter # Porter (M2-LCDP)
- const: renesas,r8a7791
- description: R-Car V2H (R8A77920)
items:
- enum:
- renesas,blanche # Blanche (RTP0RC7792SEB00010S)
- renesas,wheat # Wheat (RTP0RC7792ASKB0000JE)
- const: renesas,r8a7792
- description: R-Car M2-N (R8A77930)
items:
- enum:
- renesas,gose # Gose (RTP0RC7793SEB00010S)
- const: renesas,r8a7793
- description: R-Car E2 (R8A77940)
items:
- enum:
- renesas,alt # Alt (RTP0RC7794SEB00010S)
- renesas,silk # SILK (RTP0RC7794LCB00011S)
- const: renesas,r8a7794
- description: R-Car H3 (R8A77950)
items:
- enum:
# H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
# H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
- renesas,h3ulcb
- renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S)
- renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
- const: renesas,r8a7795
- description: R-Car M3-W (R8A77960)
items:
- enum:
- renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
- renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S)
- renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
- const: renesas,r8a7796
- description: Kingfisher (SBEV-RCAR-KF-M03)
items:
- const: shimafuji,kingfisher
- enum:
- renesas,h3ulcb
- renesas,m3ulcb
- enum:
- renesas,r8a7795
- renesas,r8a7796
- description: R-Car M3-N (R8A77965)
items:
- enum:
- renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
- renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N))
- renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
- const: renesas,r8a77965
- description: R-Car V3M (R8A77970)
items:
- enum:
- renesas,eagle # Eagle (RTP0RC77970SEB0010S)
- renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10)
- const: renesas,r8a77970
- description: R-Car V3H (R8A77980)
items:
- enum:
- renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
- renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
- const: renesas,r8a77980
- description: R-Car E3 (R8A77990)
items:
- enum:
- renesas,ebisu # Ebisu (RTP0RC77990SEB0010S)
- const: renesas,r8a77990
- description: R-Car D3 (R8A77995)
items:
- enum:
- renesas,draak # Draak (RTP0RC77995SEB0010S)
- const: renesas,r8a77995
- description: RZ/N1D (R9A06G032)
items:
- enum:
- renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
- const: renesas,r9a06g032
...

17
Documentation/devicetree/bindings/arm/rockchip.yaml
View File

@@ -60,6 +60,11 @@ properties:
- const: chipspark,rayeager-px2
- const: rockchip,rk3066a
- description: Elgin RV1108 R1
items:
- const: elgin,rv1108-r1
- const: rockchip,rv1108
- description: Firefly Firefly-RK3288
items:
- enum:
@@ -87,6 +92,13 @@ properties:
- const: firefly,roc-rk3399-pc
- const: rockchip,rk3399
- description: FriendlyElec NanoPi4 series boards
items:
- enum:
- friendlyarm,nanopc-t4
- friendlyarm,nanopi-m4
- const: rockchip,rk3399
- description: GeekBuying GeekBox
items:
- const: geekbuying,geekbox
@@ -317,6 +329,11 @@ properties:
- const: radxa,rock
- const: rockchip,rk3188
- description: Radxa ROCK Pi 4
items:
- const: radxa,rockpi4
- const: rockchip,rk3399
- description: Radxa Rock2 Square
items:
- const: radxa,rock2-square

155
Documentation/devicetree/bindings/arm/shmobile.txt
View File

@@ -1,155 +0,0 @@
Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
--------------------------------------------------------------------
SoCs:
- Emma Mobile EV2
compatible = "renesas,emev2"
- RZ/A1H (R7S72100)
compatible = "renesas,r7s72100"
- RZ/A2 (R7S9210)
compatible = "renesas,r7s9210"
- SH-Mobile AG5 (R8A73A00/SH73A0)
compatible = "renesas,sh73a0"
- R-Mobile APE6 (R8A73A40)
compatible = "renesas,r8a73a4"
- R-Mobile A1 (R8A77400)
compatible = "renesas,r8a7740"
- RZ/G1H (R8A77420)
compatible = "renesas,r8a7742"
- RZ/G1M (R8A77430)
compatible = "renesas,r8a7743"
- RZ/G1N (R8A77440)
compatible = "renesas,r8a7744"
- RZ/G1E (R8A77450)
compatible = "renesas,r8a7745"
- RZ/G1C (R8A77470)
compatible = "renesas,r8a77470"
- RZ/G2M (R8A774A1)
compatible = "renesas,r8a774a1"
- RZ/G2E (R8A774C0)
compatible = "renesas,r8a774c0"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
compatible = "renesas,r8a7779"
- R-Car H2 (R8A77900)
compatible = "renesas,r8a7790"
- R-Car M2-W (R8A77910)
compatible = "renesas,r8a7791"
- R-Car V2H (R8A77920)
compatible = "renesas,r8a7792"
- R-Car M2-N (R8A77930)
compatible = "renesas,r8a7793"
- R-Car E2 (R8A77940)
compatible = "renesas,r8a7794"
- R-Car H3 (R8A77950)
compatible = "renesas,r8a7795"
- R-Car M3-W (R8A77960)
compatible = "renesas,r8a7796"
- R-Car M3-N (R8A77965)
compatible = "renesas,r8a77965"
- R-Car V3M (R8A77970)
compatible = "renesas,r8a77970"
- R-Car V3H (R8A77980)
compatible = "renesas,r8a77980"
- R-Car E3 (R8A77990)
compatible = "renesas,r8a77990"
- R-Car D3 (R8A77995)
compatible = "renesas,r8a77995"
- RZ/N1D (R9A06G032)
compatible = "renesas,r9a06g032"
Boards:
- Alt (RTP0RC7794SEB00010S)
compatible = "renesas,alt", "renesas,r8a7794"
- APE6-EVM
compatible = "renesas,ape6evm", "renesas,r8a73a4"
- Atmark Techno Armadillo-800 EVA
compatible = "renesas,armadillo800eva", "renesas,r8a7740"
- Blanche (RTP0RC7792SEB00010S)
compatible = "renesas,blanche", "renesas,r8a7792"
- BOCK-W
compatible = "renesas,bockw", "renesas,r8a7778"
- Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
compatible = "renesas,condor", "renesas,r8a77980"
- Draak (RTP0RC77995SEB0010S)
compatible = "renesas,draak", "renesas,r8a77995"
- Eagle (RTP0RC77970SEB0010S)
compatible = "renesas,eagle", "renesas,r8a77970"
- Ebisu (RTP0RC77990SEB0010S)
compatible = "renesas,ebisu", "renesas,r8a77990"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
- GR-Peach (X28A-M01-E/F)
compatible = "renesas,gr-peach", "renesas,r7s72100"
- Gose (RTP0RC7793SEB00010S)
compatible = "renesas,gose", "renesas,r8a7793"
- H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
compatible = "renesas,h3ulcb", "renesas,r8a7795"
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
- iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
compatible = "iwave,g23s", "renesas,r8a77470"
- iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"
- iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
compatible = "iwave,g22m", "renesas,r8a7745"
- iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"
- iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
compatible = "iwave,g20m", "renesas,r8a7743"
- iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744"
- iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
compatible = "iwave,g20m", "renesas,r8a7744"
- Kingfisher (SBEV-RCAR-KF-M03)
compatible = "shimafuji,kingfisher"
- Koelsch (RTP0RC7791SEB00010S)
compatible = "renesas,koelsch", "renesas,r8a7791"
- Kyoto Microcomputer Co. KZM-A9-Dual
compatible = "renesas,kzm9d", "renesas,emev2"
- Kyoto Microcomputer Co. KZM-A9-GT
compatible = "renesas,kzm9g", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
- M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
compatible = "renesas,m3ulcb", "renesas,r8a7796"
- M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
compatible = "renesas,m3nulcb", "renesas,r8a77965"
- Marzen (R0P7779A00010S)
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
compatible = "renesas,porter", "renesas,r8a7791"
- RSKRZA1 (YR0K77210C000BE)
compatible = "renesas,rskrza1", "renesas,r7s72100"
- RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"
- Salvator-X (RTP0RC7795SIPB0010S)
compatible = "renesas,salvator-x", "renesas,r8a7795"
- Salvator-X (RTP0RC7796SIPB0011S)
compatible = "renesas,salvator-x", "renesas,r8a7796"
- Salvator-X (RTP0RC7796SIPB0011S (M3-N))
compatible = "renesas,salvator-x", "renesas,r8a77965"
- Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
compatible = "renesas,salvator-xs", "renesas,r8a7795"
- Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
compatible = "renesas,salvator-xs", "renesas,r8a7796"
- Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
compatible = "renesas,salvator-xs", "renesas,r8a77965"
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
- SK-RZG1E (YR8A77450S000BE)
compatible = "renesas,sk-rzg1e", "renesas,r8a7745"
- SK-RZG1M (YR8A77430S000BE)
compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
- Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
compatible = "renesas,stout", "renesas,r8a7790"
- V3HSK (Y-ASK-RCAR-V3H-WS10)
compatible = "renesas,v3hsk", "renesas,r8a77980"
- V3MSK (Y-ASK-RCAR-V3M-WS10)
compatible = "renesas,v3msk", "renesas,r8a77970"
- Wheat (RTP0RC7792ASKB0000JE)
compatible = "renesas,wheat", "renesas,r8a7792"

23
Documentation/devicetree/bindings/arm/technologic.txt
View File

@@ -1,23 +0,0 @@
Technologic Systems Platforms Device Tree Bindings
--------------------------------------------------
TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip.
It can be mounted on a carrier board providing additional peripheral connectors.
Required root node properties:
- compatible = "technologic,imx28-ts4600", "fsl,imx28"
TS-4800 board
Required root node properties:
- compatible = "technologic,imx51-ts4800", "fsl,imx51";
TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
It can be mounted on a carrier board providing additional peripheral connectors.
Required root node properties:
- compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"
- compatible = "technologic,imx6q-ts4900", "fsl,imx6q"
TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
It can be mounted on a carrier board providing additional peripheral connectors.
Required root node properties:
- compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"
- compatible = "technologic,imx6q-ts7970", "fsl,imx6q"

2
Documentation/devicetree/bindings/arm/tegra.yaml
View File

@@ -87,9 +87,11 @@ properties:
- const: nvidia,tegra124
- items:
- enum:
- nvidia,darcy
- nvidia,p2371-0000
- nvidia,p2371-2180
- nvidia,p2571
- nvidia,p2894-0050-a08
- const: nvidia,tegra210
- items:
- enum:

83
Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
View File

@@ -8,10 +8,11 @@ the fast CPU cluster. It consists of a free-running voltage controlled
oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
control module that will automatically adjust the VDD_CPU voltage by
communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
Currently only the I2C mode is supported by these bindings.
Required properties:
- compatible : should be "nvidia,tegra124-dfll"
- compatible : should be one of:
- "nvidia,tegra124-dfll": for Tegra124
- "nvidia,tegra210-dfll": for Tegra210
- reg : Defines the following set of registers, in the order listed:
- registers for the DFLL control logic.
- registers for the I2C output logic.
@@ -45,10 +46,31 @@ Required properties for the control loop parameters:
Optional properties for the control loop parameters:
- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
Optional properties for mode selection:
- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C.
Required properties for I2C mode:
- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
Example:
Required properties for PWM mode:
- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds.
- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM
control is disabled and the PWM output is tristated. Note that this voltage is
configured in hardware, typically via a resistor divider.
- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control
is enabled and PWM output is low. Hence, this is the minimum output voltage
that the regulator supports when PWM control is enabled.
- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts
corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th
duty cycle would be: nvidia,pwm-min-microvolts +
nvidia,pwm-voltage-step-microvolts * 2.
- pinctrl-0: I/O pad configuration when PWM control is enabled.
- pinctrl-1: I/O pad configuration when PWM control is disabled.
- pinctrl-names: must include the following entries:
- dvfs_pwm_enable: I/O pad configuration when PWM control is enabled.
- dvfs_pwm_disable: I/O pad configuration when PWM control is disabled.
Example for I2C:
clock@70110000 {
compatible = "nvidia,tegra124-dfll";
@@ -76,3 +98,58 @@ clock@70110000 {
nvidia,i2c-fs-rate = <400000>;
};
Example for PWM:
clock@70110000 {
compatible = "nvidia,tegra124-dfll";
reg = <0 0x70110000 0 0x100>, /* DFLL control */
<0 0x70110000 0 0x100>, /* I2C output control */
<0 0x70110100 0 0x100>, /* Integrated I2C controller */
<0 0x70110200 0 0x100>; /* Look-up table RAM */
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
<&tegra_car TEGRA210_CLK_DFLL_REF>,
<&tegra_car TEGRA124_CLK_I2C5>;;
clock-names = "soc", "ref", "i2c";
resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
reset-names = "dvco";
#clock-cells = <0>;
clock-output-names = "dfllCPU_out";
nvidia,sample-rate = <25000>;
nvidia,droop-ctrl = <0x00000f00>;
nvidia,force-mode = <1>;
nvidia,cf = <6>;
nvidia,ci = <0>;
nvidia,cg = <2>;
nvidia,pwm-min-microvolts = <708000>; /* 708mV */
nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
nvidia,pwm-to-pmic;
nvidia,pwm-tristate-microvolts = <1000000>;
nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */
pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
pinctrl-0 = <&dvfs_pwm_active_state>;
pinctrl-1 = <&dvfs_pwm_inactive_state>;
};
/* pinmux nodes added for completeness. Binding doc can be found in:
* Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
*/
pinmux: pinmux@700008d4 {
dvfs_pwm_active_state: dvfs_pwm_active {
dvfs_pwm_pbb1 {
nvidia,pins = "dvfs_pwm_pbb1";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
dvfs_pwm_inactive_state: dvfs_pwm_inactive {
dvfs_pwm_pbb1 {
nvidia,pins = "dvfs_pwm_pbb1";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
};
};

6
Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
View File

@@ -9,11 +9,9 @@ Required properties:
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- cpu_g: Clock mux for the fast CPU cluster.
- cpu_lp: Clock mux for the low-power CPU cluster.
- pll_x: Fast PLL clocksource.
- pll_p: Auxiliary PLL used during fast PLL rate changes.
- dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
- vdd-cpu-supply: Regulator for CPU voltage
Optional properties:
- clock-latency: Specify the possible maximum transition latency for clock,
@@ -31,13 +29,11 @@ cpus {
reg = <0>;
clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
<&tegra_car TEGRA124_CLK_CCLK_LP>,
<&tegra_car TEGRA124_CLK_PLL_X>,
<&tegra_car TEGRA124_CLK_PLL_P>,
<&dfll>;
clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
clock-latency = <300000>;
vdd-cpu-supply: <&vdd_cpu>;
};
<...>

33
Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt Normal file
View File

@@ -0,0 +1,33 @@
Meson specific Simple Framebuffer bindings
This binding documents meson specific extensions to the simple-framebuffer
bindings. The meson simplefb u-boot code relies on the devicetree containing
pre-populated simplefb nodes.
These extensions are intended so that u-boot can select the right node based
on which pipeline is being used. As such they are solely intended for
firmware / bootloader use, and the OS should ignore them.
Required properties:
- compatible: "amlogic,simple-framebuffer", "simple-framebuffer"
- amlogic,pipeline, one of:
"vpu-cvbs"
"vpu-hdmi"
Example:
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
simplefb_hdmi: framebuffer-hdmi {
compatible = "amlogic,simple-framebuffer",
"simple-framebuffer";
amlogic,pipeline = "vpu-hdmi";
clocks = <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_CLK81>,
<&clkc CLKID_GCLK_VENCI_INT0>;
power-domains = <&pwrc_vpu>;
};
};

1
Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
View File

@@ -8,7 +8,6 @@ which can create the interprocessor communication (IPC) between the CPU
and BPMP.
Required properties:
- name : Should be bpmp
- compatible
Array of strings
One of:

35
Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt Normal file
View File

@@ -0,0 +1,35 @@
NVIDIA Tegra210 Boot and Power Management Processor (BPMP)
The Boot and Power Management Processor (BPMP) is a co-processor found
in Tegra210 SoC. It is designed to handle the early stages of the boot
process as well as to assisting in entering deep low power state
(suspend to ram), and also offloading DRAM memory clock scaling on
some platforms. The binding document defines the resources that would
be used by the BPMP T210 firmware driver, which can create the
interprocessor communication (IPC) between the CPU and BPMP.
Required properties:
- compatible
Array of strings
One of:
- "nvidia,tegra210-bpmp"
- reg: physical base address and length for HW synchornization primitives
1) base address and length to Tegra 'atomics' hardware
2) base address and length to Tegra 'semaphore' hardware
- interrupts: specifies the interrupt number for receiving messages ("rx")
and for triggering messages ("tx")
Optional properties:
- #clock-cells : Should be 1 for platforms where DRAM clock control is
offloaded to bpmp.
Example:
bpmp@70016000 {
compatible = "nvidia,tegra210-bpmp";
reg = <0x0 0x70016000 0x0 0x2000
0x0 0x60001000 0x0 0x1000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "tx", "rx";
};

6
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
View File

@@ -13,6 +13,8 @@ Required properties:
+ allwinner,sun8i-h3-mali
+ allwinner,sun50i-a64-mali
+ allwinner,sun50i-h5-mali
+ amlogic,meson8-mali
+ amlogic,meson8b-mali
+ amlogic,meson-gxbb-mali
+ amlogic,meson-gxl-mali
+ rockchip,rk3036-mali
@@ -82,6 +84,10 @@ to specify one more vendor-specific compatible, among:
Required properties:
* resets: phandle to the reset line for the GPU
- amlogic,meson8-mali and amlogic,meson8b-mali
Required properties:
* resets: phandle to the reset line for the GPU
- Rockchip variants:
Required properties:
* resets: phandle to the reset line for the GPU

8
Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
View File

@@ -2,7 +2,12 @@
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Required properties:
- mfd
compatible: Should be
"ti,am3359-tscadc" for AM335x/AM437x SoCs
"ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs
- child "tsc"
compatible: Should be "ti,am3359-tsc".
ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
support on the platform.
ti,x-plate-resistance: X plate resistance
@@ -25,6 +30,9 @@ Required properties:
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
XP = 0, XN = 1, YP = 2, YN = 3.
- child "adc"
compatible: Should be
"ti,am3359-adc" for AM335x/AM437x SoCs
"ti,am654-adc", "ti,am3359-adc" for AM654 SoCs
ti,adc-channels: List of analog inputs available for ADC.
AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.

1
Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
View File

@@ -9,6 +9,7 @@ Required properties:
"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
"mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765

2
Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
View File

@@ -1,4 +1,4 @@
TI CPSW Phy mode Selection Device Tree Bindings
TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED)
-----------------------------------------------
Required properties:

1
Documentation/devicetree/bindings/sram/sunxi-sram.txt
View File

@@ -63,6 +63,7 @@ The valid sections compatible for H5 are:
The valid sections compatible for H6 are:
- allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c
- allwinner,sun50i-h6-sram-c1, allwinner,sun4i-a10-sram-c1
The valid sections compatible for F1C100s are:
- allwinner,suniv-f1c100s-sram-d, allwinner,sun4i-a10-sram-d

5
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@@ -24,6 +24,7 @@ amarula Amarula Solutions
amazon Amazon.com, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
amediatech Shenzhen Amediatech Technology Co., Ltd
amlogic Amlogic, Inc.
ampire Ampire Co., Ltd.
ams AMS AG
@@ -65,6 +66,7 @@ bticino Bticino International
calxeda Calxeda
capella Capella Microsystems, Inc
cascoda Cascoda, Ltd.
catalyst Catalyst Semiconductor, Inc.
cavium Cavium, Inc.
cdns Cadence Design Systems Inc.
cdtech CDTech(H.K.) Electronics Limited
@@ -108,11 +110,13 @@ dongwoon Dongwoon Anatech
dptechnics DPTechnics
dragino Dragino Technology Co., Limited
ea Embedded Artists AB
ebs-systart EBS-SYSTART GmbH
ebv EBV Elektronik
eckelmann Eckelmann AG
edt Emerging Display Technologies
eeti eGalax_eMPIA Technology Inc
elan Elan Microelectronic Corp.
elgin Elgin S/A.
embest Shenzhen Embest Technology Co., Ltd.
emlid Emlid, Ltd.
emmicro EM Microelectronic
@@ -273,6 +277,7 @@ nintendo Nintendo
nlt NLT Technologies, Ltd.
nokia Nokia
nordic Nordic Semiconductor
novtech NovTech, Inc.
nutsboard NutsBoard
nuvoton Nuvoton Technology Corporation
nvd New Vision Display