diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 85581b40e598..60a0ead127fa 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -158,6 +158,16 @@ config PHY_QCOM_UNIPHY_PCIE_28LP handles PHY initialization, clock management required after resetting the hardware and power management. +config PHY_QCOM_M31_EUSB + tristate "Qualcomm M31 eUSB2 PHY driver support" + depends on USB && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support M31 EUSB2 PHY transceivers on Qualcomm + chips with DWC3 USB core. It supports initializing and cleaning + up of the associated USB repeater that is paired with the eUSB2 + PHY. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 3851e28a212d..b71a6a0bed3f 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_M31_USB) += phy-qcom-m31.o +obj-$(CONFIG_PHY_QCOM_M31_EUSB) += phy-qcom-m31-eusb2.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o phy-qcom-qmp-usbc.o diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c new file mode 100644 index 000000000000..9f02b8a78f6e --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) + +#define USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define SIDDQ_SEL BIT(1) +#define SIDDQ BIT(2) +#define FSEL GENMASK(6, 4) +#define FSEL_38_4_MHZ_VAL (0x6) + +#define USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB_PHY_CFG0 (0x94) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB_PHY_CFG1 (0x154) +#define PLL_EN BIT(0) + +#define USB_PHY_FSEL_SEL (0xb8) +#define FSEL_SEL BIT(0) + +#define USB_PHY_XCFGI_39_32 (0x16c) +#define HSTX_PE GENMASK(3, 2) + +#define USB_PHY_XCFGI_71_64 (0x17c) +#define HSTX_SWING GENMASK(3, 0) + +#define USB_PHY_XCFGI_31_24 (0x168) +#define HSTX_SLEW GENMASK(2, 0) + +#define USB_PHY_XCFGI_7_0 (0x15c) +#define PLL_LOCK_TIME GENMASK(1, 0) + +#define M31_EUSB_PHY_INIT_CFG(o, b, v) \ +{ \ + .off = o, \ + .mask = b, \ + .val = v, \ +} + +struct m31_phy_tbl_entry { + u32 off; + u32 mask; + u32 val; +}; + +struct m31_eusb2_priv_data { + const struct m31_phy_tbl_entry *setup_seq; + unsigned int setup_seq_nregs; + const struct m31_phy_tbl_entry *override_seq; + unsigned int override_seq_nregs; + const struct m31_phy_tbl_entry *reset_seq; + unsigned int reset_seq_nregs; + unsigned int fsel; +}; + +static const struct m31_phy_tbl_entry m31_eusb2_setup_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL5, POR, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG1, PLL_EN, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_FSEL_SEL, FSEL_SEL, 1), +}; + +static const struct m31_phy_tbl_entry m31_eusb_phy_override_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_39_32, HSTX_PE, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_71_64, HSTX_SWING, 7), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_31_24, HSTX_SLEW, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_XCFGI_7_0, PLL_LOCK_TIME, 0), +}; + +static const struct m31_phy_tbl_entry m31_eusb_phy_reset_tbl[] = { + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL0, SLEEPM, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ_SEL, 1), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_UTMI_CTRL5, POR, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 0), + M31_EUSB_PHY_INIT_CFG(USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0), +}; + +static const struct regulator_bulk_data m31_eusb_phy_vregs[] = { + { .supply = "vdd" }, + { .supply = "vdda12" }, +}; + +#define M31_EUSB_NUM_VREGS ARRAY_SIZE(m31_eusb_phy_vregs) + +struct m31eusb2_phy { + struct phy *phy; + void __iomem *base; + const struct m31_eusb2_priv_data *data; + enum phy_mode mode; + + struct regulator_bulk_data *vregs; + struct clk *clk; + struct reset_control *reset; + + struct phy *repeater; +}; + +static int m31eusb2_phy_write_readback(void __iomem *base, u32 offset, + const u32 mask, u32 val) +{ + u32 write_val; + u32 tmp; + + tmp = readl(base + offset); + tmp &= ~mask; + write_val = tmp | val; + + writel(write_val, base + offset); + + tmp = readl(base + offset); + tmp &= mask; + + if (tmp != val) { + pr_err("write: %x to offset: %x FAILED\n", val, offset); + return -EINVAL; + } + + return 0; +} + +static int m31eusb2_phy_write_sequence(struct m31eusb2_phy *phy, + const struct m31_phy_tbl_entry *tbl, + int num) +{ + int i; + int ret; + + for (i = 0 ; i < num; i++, tbl++) { + dev_dbg(&phy->phy->dev, "Offset:%x BitMask:%x Value:%x", + tbl->off, tbl->mask, tbl->val); + + ret = m31eusb2_phy_write_readback(phy->base, + tbl->off, tbl->mask, + tbl->val << __ffs(tbl->mask)); + if (ret < 0) + return ret; + } + + return 0; +} + +static int m31eusb2_phy_set_mode(struct phy *uphy, enum phy_mode mode, int submode) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + + phy->mode = mode; + + return phy_set_mode_ext(phy->repeater, mode, submode); +} + +static int m31eusb2_phy_init(struct phy *uphy) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + const struct m31_eusb2_priv_data *data = phy->data; + int ret; + + ret = regulator_bulk_enable(M31_EUSB_NUM_VREGS, phy->vregs); + if (ret) { + dev_err(&uphy->dev, "failed to enable regulator, %d\n", ret); + return ret; + } + + ret = phy_init(phy->repeater); + if (ret) { + dev_err(&uphy->dev, "repeater init failed. %d\n", ret); + goto disable_vreg; + } + + ret = clk_prepare_enable(phy->clk); + if (ret) { + dev_err(&uphy->dev, "failed to enable cfg ahb clock, %d\n", ret); + goto disable_repeater; + } + + /* Perform phy reset */ + reset_control_assert(phy->reset); + udelay(5); + reset_control_deassert(phy->reset); + + m31eusb2_phy_write_sequence(phy, data->setup_seq, data->setup_seq_nregs); + m31eusb2_phy_write_readback(phy->base, + USB_PHY_HS_PHY_CTRL_COMMON0, FSEL, + FIELD_PREP(FSEL, data->fsel)); + m31eusb2_phy_write_sequence(phy, data->override_seq, data->override_seq_nregs); + m31eusb2_phy_write_sequence(phy, data->reset_seq, data->reset_seq_nregs); + + return 0; + +disable_repeater: + phy_exit(phy->repeater); +disable_vreg: + regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs); + + return 0; +} + +static int m31eusb2_phy_exit(struct phy *uphy) +{ + struct m31eusb2_phy *phy = phy_get_drvdata(uphy); + + clk_disable_unprepare(phy->clk); + regulator_bulk_disable(M31_EUSB_NUM_VREGS, phy->vregs); + phy_exit(phy->repeater); + + return 0; +} + +static const struct phy_ops m31eusb2_phy_gen_ops = { + .init = m31eusb2_phy_init, + .exit = m31eusb2_phy_exit, + .set_mode = m31eusb2_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int m31eusb2_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + const struct m31_eusb2_priv_data *data; + struct device *dev = &pdev->dev; + struct m31eusb2_phy *phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + data = device_get_match_data(dev); + if (IS_ERR(data)) + return -EINVAL; + phy->data = data; + + phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->base)) + return PTR_ERR(phy->base); + + phy->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(phy->reset)) + return PTR_ERR(phy->reset); + + phy->clk = devm_clk_get(dev, NULL); + if (IS_ERR(phy->clk)) + return dev_err_probe(dev, PTR_ERR(phy->clk), + "failed to get clk\n"); + + phy->phy = devm_phy_create(dev, NULL, &m31eusb2_phy_gen_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->phy), + "failed to create phy\n"); + + ret = devm_regulator_bulk_get_const(dev, M31_EUSB_NUM_VREGS, + m31_eusb_phy_vregs, &phy->vregs); + if (ret) + return dev_err_probe(dev, ret, + "failed to get regulator supplies\n"); + + phy_set_drvdata(phy->phy, phy); + + phy->repeater = devm_of_phy_get_by_index(dev, dev->of_node, 0); + if (IS_ERR(phy->repeater)) + return dev_err_probe(dev, PTR_ERR(phy->repeater), + "failed to get repeater\n"); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered M31 USB phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct m31_eusb2_priv_data m31_eusb_v1_data = { + .setup_seq = m31_eusb2_setup_tbl, + .setup_seq_nregs = ARRAY_SIZE(m31_eusb2_setup_tbl), + .override_seq = m31_eusb_phy_override_tbl, + .override_seq_nregs = ARRAY_SIZE(m31_eusb_phy_override_tbl), + .reset_seq = m31_eusb_phy_reset_tbl, + .reset_seq_nregs = ARRAY_SIZE(m31_eusb_phy_reset_tbl), + .fsel = FSEL_38_4_MHZ_VAL, +}; + +static const struct of_device_id m31eusb2_phy_id_table[] = { + { .compatible = "qcom,sm8750-m31-eusb2-phy", .data = &m31_eusb_v1_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, m31eusb2_phy_id_table); + +static struct platform_driver m31eusb2_phy_driver = { + .probe = m31eusb2_phy_probe, + .driver = { + .name = "qcom-m31eusb2-phy", + .of_match_table = m31eusb2_phy_id_table, + }, +}; + +module_platform_driver(m31eusb2_phy_driver); + +MODULE_AUTHOR("Wesley Cheng "); +MODULE_DESCRIPTION("eUSB2 Qualcomm M31 HSPHY driver"); +MODULE_LICENSE("GPL");