From 1e20223d8e247c3001f2c4612cf617636908bd13 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Fri, 3 Feb 2017 20:36:28 +0200 Subject: [PATCH 1/6] ARM: dts: qcom: Add msm8974 CoreSight components Add initial set of CoreSight components found on Qualcomm msm8974 and apq8074 based platforms, including the APQ8074 Dragonboard board. Signed-off-by: Ivan T. Ivanov Signed-off-by: Georgi Djakov Reviewed-by: Mathieu Poirier Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 280 +++++++++++++++++++++++++++- 1 file changed, 276 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d3e1a61b8671..9a644ad85c2b 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -67,7 +67,7 @@ #size-cells = <0>; interrupts = <1 9 0xf04>; - cpu@0 { + CPU0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -78,7 +78,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@1 { + CPU1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -89,7 +89,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@2 { + CPU2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -100,7 +100,7 @@ cpu-idle-states = <&CPU_SPC>; }; - cpu@3 { + CPU3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; @@ -732,6 +732,278 @@ status = "disabled"; }; + + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + port { + etr_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; + + tpiu@fc318000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xfc318000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; + + replicator@fc31c000 { + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0xfc31c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@fc307000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc307000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + port@1 { + reg = <0>; + etf_in: endpoint { + slave-mode; + remote-endpoint = <&merger_out>; + }; + }; + }; + }; + + funnel@fc31b000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0xfc31b000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected trought funnel to Audio, Modem and + * Resource and Power Manager CPU's + * 2...7 - not-connected + */ + port@1 { + reg = <1>; + merger_in1: endpoint { + slave-mode; + remote-endpoint = <&funnel1_out>; + }; + }; + port@8 { + reg = <0>; + merger_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + funnel@fc31a000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + slave-mode; + remote-endpoint = <&kpss_out>; + }; + }; + port@8 { + reg = <0>; + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; + }; + }; + }; + }; + + funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@8 { + reg = <0>; + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + etm@fc33c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; + }; + }; + + etm@fc33d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33d000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; + }; + }; + + etm@fc33e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33e000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; + }; + }; + + etm@fc33f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0xfc33f000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; + }; + }; }; smd { From 4d931755fe6d215598c35076a31e58a660fbbcfb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonathan=20Neusch=C3=A4fer?= Date: Tue, 7 Mar 2017 03:22:00 +0100 Subject: [PATCH 2/6] ARM: dts: msm8974: Hook up adsp-pil's xo clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Without this patch (and with CONFIG_QCOM_ADSP_PIL), I get this error: [ 0.711529] qcom_adsp_pil adsp-pil: failed to get xo clock [ 0.711540] remoteproc remoteproc0: releasing adsp-pil With this patch, adsp-pil can initialize correctly. Signed-off-by: Jonathan Neuschäfer Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 9a644ad85c2b..bd752fbce2c3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -250,6 +250,9 @@ cx-supply = <&pm8841_s2>; + clocks = <&xo_board>; + clock-names = "xo"; + memory-region = <&adsp_region>; qcom,smem-states = <&adsp_smp2p_out 0>; From dfc1401026f05c3cab963260ad17f3dbc8549b50 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 15 Mar 2017 10:16:49 +0100 Subject: [PATCH 3/6] ARM: dts: add SDC2 and SDC4 to the MSM8660 family To make the picture complete, add DTS entries also for the second and fourth MMC/SD blocks on the MSM8660. SDC2 is an 8-bit interface and SDC4 is a 4-bit interface. Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8660.dtsi | 30 +++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 91c9a62ae725..747669a62aa8 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -392,6 +392,21 @@ cap-mmc-highspeed; }; + sdcc2: sdcc@12140000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12140000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + }; + sdcc3: sdcc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -408,6 +423,21 @@ no-1-8-v; }; + sdcc4: sdcc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + }; + sdcc5: sdcc@12200000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; From 3869fd6a76bf5e16862d092cfb11440f286e6cd1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 15 Mar 2017 10:17:02 +0100 Subject: [PATCH 4/6] ARM: dts: fix typo on APQ8060 Dragonboard The DTS referred to SDC5 when it meant SDC1. Acked-by: Bjorn Andersson Signed-off-by: Linus Walleij Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 39d9e6ddefed..2da1413f5720 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -95,17 +95,17 @@ function = "sdc1"; }; clk { - pins = "gpio167"; /* SDC5 CLK */ + pins = "gpio167"; /* SDC1 CLK */ drive-strength = <16>; bias-disable; }; cmd { - pins = "gpio168"; /* SDC5 CMD */ + pins = "gpio168"; /* SDC1 CMD */ drive-strength = <10>; bias-pull-up; }; data { - /* SDC5 D0 to D7 */ + /* SDC1 D0 to D7 */ pins = "gpio159", "gpio160", "gpio161", "gpio162", "gpio163", "gpio164", "gpio165", "gpio166"; drive-strength = <10>; From 9db9559cfaa3ed91cf6deec3b7e22a62c92d63bf Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Thu, 16 Mar 2017 14:55:09 +0200 Subject: [PATCH 5/6] ARM: dts: qcom: msm8974: Add RPMCC DT node Add the RPM Clock Controller DT node for msm8974-based platforms, so that drivers can use the clocks provided by the RPM processor. Signed-off-by: Georgi Djakov Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index bd752fbce2c3..4ef214f9c10b 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -2,6 +2,7 @@ #include #include +#include #include #include #include "skeleton.dtsi" @@ -1035,6 +1036,11 @@ compatible = "qcom,rpm-msm8974"; qcom,smd-channels = "rpm_requests"; + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + pm8841-regulators { compatible = "qcom,rpm-pm8841-regulators"; From 21677ecca20151e61c3290ef37c5cd7afec60a5a Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Wed, 5 Apr 2017 09:50:59 -0500 Subject: [PATCH 6/6] Revert "ARM: dts: qcom: msm8974: Add USB gadget nodes" This reverts commit 769907ae6e6c2871c2ba4f578814d86fbfbe8d91. This change caused issues with people using USB gadget for serial consoles. In addition, with the other USB changes coming in, it makes sense to revert this patch and apply the new set as it becomes ready. Signed-off-by: Andy Gross --- .../dts/qcom-msm8974-sony-xperia-honami.dts | 8 ---- arch/arm/boot/dts/qcom-msm8974.dtsi | 39 ------------------- 2 files changed, 47 deletions(-) diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 96c853bab8ba..e7c1577d56f4 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -413,14 +413,6 @@ dma-controller@f9944000 { qcom,controlled-remotely; }; - - usb-phy@f9a55000 { - status = "ok"; - }; - - usb@f9a55000 { - status = "ok"; - }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 4ef214f9c10b..307bf6a647b3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -4,7 +4,6 @@ #include #include #include -#include #include "skeleton.dtsi" / { @@ -699,44 +698,6 @@ qcom,ee = <0>; }; - usb1_phy: usb-phy@f9a55000 { - compatible = "qcom,usb-otg-snps"; - - reg = <0xf9a55000 0x400>; - interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>, - <&spmi_bus 0 0x9 0 0>; - interrupt-names = "core_irq", "async_irq", "pmic_id_irq"; - - vddcx-supply = <&pm8841_s2>; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; - - dr_mode = "otg"; - qcom,phy-init-sequence = <0x63 0x81 0xfffffff>; - qcom,otg-control = <1>; - qcom,phy-num = <0>; - - resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; - reset-names = "phy", "link"; - - clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, - <&gcc GCC_USB_HS_AHB_CLK>; - clock-names = "phy", "core", "iface"; - - status = "disabled"; - }; - - usb@f9a55000 { - compatible = "qcom,ci-hdrc"; - reg = <0xf9a55000 0x400>; - dr_mode = "otg"; - interrupts = <0 134 0>, <0 140 0>; - interrupt-names = "core_irq", "async_irq"; - usb-phy = <&usb1_phy>; - - status = "disabled"; - }; - etr@fc322000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0xfc322000 0x1000>;