Merge branch 'fixes' into next/soc

Merge in fixes here, since the last batch didn't make it in before the
release of 4.20, and we might as well group them with this set of
patches.

* fixes: (822 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  + Linux 4.20-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>

CREDITS

@@ -2138,6 +2138,10 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jarkko Lavinen
+E: jarkko.lavinen@nokia.com
+D: OMAP MMC support
+
 N: Jonathan Layes
 D: ARPD support
 
@@ -2200,6 +2204,10 @@ S: Post Office Box 371
 S: North Little Rock, Arkansas 72115
 S: USA
 
+N: Christopher Li
+E: sparse@chrisli.org
+D: Sparse maintainer 2009 - 2018
+
 N: Stephan Linz
 E: linz@mazet.de
 E: Stephan.Linz@gmx.de
@@ -2533,6 +2541,10 @@ S: Ormond
 S: Victoria 3163
 S: Australia
 
+N: Eric Miao
+E: eric.y.miao@gmail.com
+D: MMP support
+
 N: Pauline Middelink
 E: middelin@polyware.nl
 D: General low-level bug fixes, /proc fixes, identd support
@@ -4107,6 +4119,10 @@ S: 1507 145th Place SE #B5
 S: Bellevue, Washington 98007
 S: USA
 
+N: Haojian Zhuang
+E: haojian.zhuang@gmail.com
+D: MMP support
+
 N: Richard Zidlicky
 E: rz@linux-m68k.org, rdzidlic@geocities.com
 W: http://www.geocities.com/rdzidlic

Documentation/admin-guide/kernel-parameters.txt

@@ -856,7 +856,8 @@
 			causing system reset or hang due to sending
 			INIT from AP to BSP.
 
-	disable_counter_freezing [HW]
+	perf_v4_pmi=	[X86,INTEL]
+			Format: <bool>
 			Disable Intel PMU counter freezing feature.
 			The feature only exists starting from
 			Arch Perfmon v4 (Skylake and newer).
@@ -3504,6 +3505,10 @@
 			before loading.
 			See Documentation/blockdev/ramdisk.txt.
 
+	psi=		[KNL] Enable or disable pressure stall information
+			tracking.
+			Format: <bool>
+
 	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
 			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
@@ -4194,9 +4199,13 @@
 
 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
+			The default operation protects the kernel from
+			user space attacks.
 
-			on   - unconditionally enable
+			on   - unconditionally enable, implies
-			off  - unconditionally disable
+			       spectre_v2_user=on
+			off  - unconditionally disable, implies
+			       spectre_v2_user=off
 			auto - kernel detects whether your CPU model is
 			       vulnerable
 
@@ -4206,6 +4215,12 @@
 			CONFIG_RETPOLINE configuration option, and the
 			compiler with which the kernel was built.
 
+			Selecting 'on' will also enable the mitigation
+			against user space to user space task attacks.
+
+			Selecting 'off' will disable both the kernel and
+			the user space protections.
+
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
@@ -4215,6 +4230,48 @@
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
 
+	spectre_v2_user=
+			[X86] Control mitigation of Spectre variant 2
+		        (indirect branch speculation) vulnerability between
+		        user space tasks
+
+			on	- Unconditionally enable mitigations. Is
+				  enforced by spectre_v2=on
+
+			off     - Unconditionally disable mitigations. Is
+				  enforced by spectre_v2=off
+
+			prctl   - Indirect branch speculation is enabled,
+				  but mitigation can be enabled via prctl
+				  per thread.  The mitigation control state
+				  is inherited on fork.
+
+			prctl,ibpb
+				- Like "prctl" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different user
+				  space processes.
+
+			seccomp
+				- Same as "prctl" above, but all seccomp
+				  threads will enable the mitigation unless
+				  they explicitly opt out.
+
+			seccomp,ibpb
+				- Like "seccomp" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different
+				  user space processes.
+
+			auto    - Kernel selects the mitigation depending on
+				  the available CPU features and vulnerability.
+
+			Default mitigation:
+			If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+			Not specifying this option is equivalent to
+			spectre_v2_user=auto.
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
@@ -4713,6 +4770,8 @@
 					prevent spurious wakeup);
 				n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a
 					pause after every control message);
+				o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
+					delay after resetting its port);
 			Example: quirks=0781:5580:bk,0a5c:5834:gij
 
 	usbhid.mousepoll=

Documentation/admin-guide/pm/cpufreq.rst

@@ -150,7 +150,7 @@ data structures necessary to handle the given policy and, possibly, to add
 a governor ``sysfs`` interface to it.  Next, the governor is started by
 invoking its ``->start()`` callback.
 
-That callback it expected to register per-CPU utilization update callbacks for
+That callback is expected to register per-CPU utilization update callbacks for
 all of the online CPUs belonging to the given policy with the CPU scheduler.
 The utilization update callbacks will be invoked by the CPU scheduler on
 important events, like task enqueue and dequeue, on every iteration of the

Documentation/admin-guide/security-bugs.rst

@@ -32,16 +32,17 @@ Disclosure and embargoed information
 The security list is not a disclosure channel.  For that, see Coordination
 below.
 
-Once a robust fix has been developed, our preference is to release the
+Once a robust fix has been developed, the release process starts.  Fixes
-fix in a timely fashion, treating it no differently than any of the other
+for publicly known bugs are released immediately.
-thousands of changes and fixes the Linux kernel project releases every
-month.
 
-However, at the request of the reporter, we will postpone releasing the
+Although our preference is to release fixes for publicly undisclosed bugs
-fix for up to 5 business days after the date of the report or after the
+as soon as they become available, this may be postponed at the request of
-embargo has lifted; whichever comes first.  The only exception to that
+the reporter or an affected party for up to 7 calendar days from the start
-rule is if the bug is publicly known, in which case the preference is to
+of the release process, with an exceptional extension to 14 calendar days
-release the fix as soon as it's available.
+if it is agreed that the criticality of the bug requires more time.  The
+only valid reason for deferring the publication of a fix is to accommodate
+the logistics of QA and large scale rollouts which require release
+coordination.
 
 Whilst embargoed information may be shared with trusted individuals in
 order to develop a fix, such information will not be published alongside

Documentation/arm64/silicon-errata.txt

@@ -57,6 +57,7 @@ stable kernels.
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
 | ARM            | Cortex-A76      | #1188873        | ARM64_ERRATUM_1188873       |
+| ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |

Documentation/core-api/xarray.rst

@@ -74,7 +74,8 @@ using :c:func:`xa_load`.  xa_store will overwrite any entry with the
 new entry and return the previous entry stored at that index.  You can
 use :c:func:`xa_erase` instead of calling :c:func:`xa_store` with a
 ``NULL`` entry.  There is no difference between an entry that has never
-been stored to and one that has most recently had ``NULL`` stored to it.
+been stored to, one that has been erased and one that has most recently
+had ``NULL`` stored to it.
 
 You can conditionally replace an entry at an index by using
 :c:func:`xa_cmpxchg`.  Like :c:func:`cmpxchg`, it will only succeed if
@@ -105,23 +106,44 @@ may result in the entry being marked at some, but not all of the other
 indices.  Storing into one index may result in the entry retrieved by
 some, but not all of the other indices changing.
 
+Sometimes you need to ensure that a subsequent call to :c:func:`xa_store`
+will not need to allocate memory.  The :c:func:`xa_reserve` function
+will store a reserved entry at the indicated index.  Users of the normal
+API will see this entry as containing ``NULL``.  If you do not need to
+use the reserved entry, you can call :c:func:`xa_release` to remove the
+unused entry.  If another user has stored to the entry in the meantime,
+:c:func:`xa_release` will do nothing; if instead you want the entry to
+become ``NULL``, you should use :c:func:`xa_erase`.
+
+If all entries in the array are ``NULL``, the :c:func:`xa_empty` function
+will return ``true``.
+
 Finally, you can remove all entries from an XArray by calling
 :c:func:`xa_destroy`.  If the XArray entries are pointers, you may wish
 to free the entries first.  You can do this by iterating over all present
 entries in the XArray using the :c:func:`xa_for_each` iterator.
 
-ID assignment
+Allocating XArrays
--------------
+------------------
+
+If you use :c:func:`DEFINE_XARRAY_ALLOC` to define the XArray, or
+initialise it by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
+the XArray changes to track whether entries are in use or not.
 
 You can call :c:func:`xa_alloc` to store the entry at any unused index
 in the XArray.  If you need to modify the array from interrupt context,
 you can use :c:func:`xa_alloc_bh` or :c:func:`xa_alloc_irq` to disable
-interrupts while allocating the ID.  Unlike :c:func:`xa_store`, allocating
+interrupts while allocating the ID.
-a ``NULL`` pointer does not delete an entry.  Instead it reserves an
+
-entry like :c:func:`xa_reserve` and you can release it using either
+Using :c:func:`xa_store`, :c:func:`xa_cmpxchg` or :c:func:`xa_insert`
-:c:func:`xa_erase` or :c:func:`xa_release`.  To use ID assignment, the
+will mark the entry as being allocated.  Unlike a normal XArray, storing
-XArray must be defined with :c:func:`DEFINE_XARRAY_ALLOC`, or initialised
+``NULL`` will mark the entry as being in use, like :c:func:`xa_reserve`.
-by passing ``XA_FLAGS_ALLOC`` to :c:func:`xa_init_flags`,
+To free an entry, use :c:func:`xa_erase` (or :c:func:`xa_release` if
+you only want to free the entry if it's ``NULL``).
+
+You cannot use ``XA_MARK_0`` with an allocating XArray as this mark
+is used to track whether an entry is free or not.  The other marks are
+available for your use.
 
 Memory allocation
 -----------------
@@ -158,6 +180,8 @@ Takes RCU read lock:
 
 Takes xa_lock internally:
  * :c:func:`xa_store`
+ * :c:func:`xa_store_bh`
+ * :c:func:`xa_store_irq`
  * :c:func:`xa_insert`
  * :c:func:`xa_erase`
  * :c:func:`xa_erase_bh`
@@ -167,6 +191,9 @@ Takes xa_lock internally:
  * :c:func:`xa_alloc`
  * :c:func:`xa_alloc_bh`
  * :c:func:`xa_alloc_irq`
+ * :c:func:`xa_reserve`
+ * :c:func:`xa_reserve_bh`
+ * :c:func:`xa_reserve_irq`
  * :c:func:`xa_destroy`
  * :c:func:`xa_set_mark`
  * :c:func:`xa_clear_mark`
@@ -177,6 +204,7 @@ Assumes xa_lock held on entry:
  * :c:func:`__xa_erase`
  * :c:func:`__xa_cmpxchg`
  * :c:func:`__xa_alloc`
+ * :c:func:`__xa_reserve`
  * :c:func:`__xa_set_mark`
  * :c:func:`__xa_clear_mark`
 
@@ -234,7 +262,8 @@ Sharing the XArray with interrupt context is also possible, either
 using :c:func:`xa_lock_irqsave` in both the interrupt handler and process
 context, or :c:func:`xa_lock_irq` in process context and :c:func:`xa_lock`
 in the interrupt handler.  Some of the more common patterns have helper
-functions such as :c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.
+functions such as :c:func:`xa_store_bh`, :c:func:`xa_store_irq`,
+:c:func:`xa_erase_bh` and :c:func:`xa_erase_irq`.
 
 Sometimes you need to protect access to the XArray with a mutex because
 that lock sits above another mutex in the locking hierarchy.  That does
@@ -322,7 +351,8 @@ to :c:func:`xas_retry`, and retry the operation if it returns ``true``.
      - :c:func:`xa_is_zero`
      - Zero entries appear as ``NULL`` through the Normal API, but occupy
        an entry in the XArray which can be used to reserve the index for
-       future use.
+       future use.  This is used by allocating XArrays for allocated entries
+       which are ``NULL``.
 
 Other internal entries may be added in the future.  As far as possible, they
 will be handled by :c:func:`xas_retry`.

Documentation/cpu-freq/cpufreq-stats.txt

@@ -86,9 +86,11 @@ transitions.
 This will give a fine grained information about all the CPU frequency
 transitions. The cat output here is a two dimensional matrix, where an entry
 <i,j> (row i, column j) represents the count of number of transitions from 
-Freq_i to Freq_j. Freq_i is in descending order with increasing rows and 
+Freq_i to Freq_j. Freq_i rows and Freq_j columns follow the sorting order in
-Freq_j is in descending order with increasing columns. The output here also 
+which the driver has provided the frequency table initially to the cpufreq core
-contains the actual freq values for each row and column for better readability.
+and so can be sorted (ascending or descending) or unsorted.  The output here
+also contains the actual freq values for each row and column for better
+readability.
 
 If the transition table is bigger than PAGE_SIZE, reading this will
 return an -EFBIG error.

Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt

@@ -1,65 +0,0 @@
-Generic ARM big LITTLE cpufreq driver's DT glue
------------------------------------------------
-
-This is DT specific glue layer for generic cpufreq driver for big LITTLE
-systems.
-
-Both required and optional properties listed below must be defined
-under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
-
-FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster
-must be present contiguously. Generic DT driver will check only node 'x' for
-cpu:x.
-
-Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt
-  for details
-
-Optional properties:
-- clock-latency: Specify the possible maximum transition latency for clock,
-  in unit of nanoseconds.
-
-Examples:
-
-cpus {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	cpu@0 {
-		compatible = "arm,cortex-a15";
-		reg = <0>;
-		next-level-cache = <&L2>;
-		operating-points = <
-			/* kHz    uV */
-			792000  1100000
-			396000  950000
-			198000  850000
-		>;
-		clock-latency = <61036>; /* two CLK32 periods */
-	};
-
-	cpu@1 {
-		compatible = "arm,cortex-a15";
-		reg = <1>;
-		next-level-cache = <&L2>;
-	};
-
-	cpu@100 {
-		compatible = "arm,cortex-a7";
-		reg = <100>;
-		next-level-cache = <&L2>;
-		operating-points = <
-			/* kHz    uV */
-			792000  950000
-			396000  750000
-			198000  450000
-		>;
-		clock-latency = <61036>; /* two CLK32 periods */
-	};
-
-	cpu@101 {
-		compatible = "arm,cortex-a7";
-		reg = <101>;
-		next-level-cache = <&L2>;
-	};
-};

Documentation/devicetree/bindings/net/can/holt_hi311x.txt

@@ -17,7 +17,7 @@ Example:
 		reg = <1>;
 		clocks = <&clk32m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
 	};

Documentation/devicetree/bindings/net/can/rcar_can.txt

@@ -5,6 +5,7 @@ Required properties:
 - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
 	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
+	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -14,26 +15,32 @@ Required properties:
 	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
 	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
 	      "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
+	      "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
 	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
 	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
 	      compatible device.
-	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
+	      compatible device.
 	      When compatible with the generic version, nodes must list the
 	      SoC-specific version corresponding to the platform first
 	      followed by the generic version.
 
 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
-- clocks: phandles and clock specifiers for 3 CAN clock inputs.
+- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
-- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+	  devices.
+	  phandles and clock specifiers for 3 CAN clock inputs for every other
+	  SoC.
+- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
+	       3 clock input name strings for every other SoC: "clkp1", "clkp2",
+	       "can_clk".
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
-Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
+Required properties for R8A7795, R8A7796 and R8A77965:
-compatible:
+For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
-In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
+be used by both CAN and CAN FD controller at the same time. It needs to be
-and can be used by both CAN and CAN FD controller at the same time. It needs to
+scaled to maximum frequency if any of these controllers use it. This is done
-be scaled to maximum frequency if any of these controllers use it. This is done
 using the below properties:
 
 - assigned-clocks: phandle of clkp2(CANFD) clock.
@@ -42,8 +49,9 @@ using the below properties:
 Optional properties:
 - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
 			    <0x0> (default) : Peripheral clock (clkp1)
-			    <0x1> : Peripheral clock (clkp2)
+			    <0x1> : Peripheral clock (clkp2) (not supported by
-			    <0x3> : Externally input clock
+				    RZ/G2 devices)
+			    <0x3> : External input clock
 
 Example
 -------

Documentation/devicetree/bindings/net/dsa/dsa.txt

@@ -7,7 +7,7 @@ limitations.
 Current Binding
 ---------------
 
-Switches are true Linux devices and can be probes by any means. Once
+Switches are true Linux devices and can be probed by any means. Once
 probed, they register to the DSA framework, passing a node
 pointer. This node is expected to fulfil the following binding, and
 may contain additional properties as required by the device it is

Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

@@ -40,24 +40,36 @@ Required properties:
 		"ref" for 19.2 MHz ref clk,
 		"com_aux" for phy common block aux clock,
 		"ref_aux" for phy reference aux clock,
+
+		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
-		For "qcom,qmp-v3-usb3-phy" must contain:
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
  - reset-names: "phy" for reset of phy block,
 		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
+		"cfg" for phy's ahb cfg block reset.
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
+
-		 "phy", "common", "cfg".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
 		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-		 "phy", "common".
+			"phy", "common".
+		For "qcom,msm8996-qmp-pcie-phy" must contain:
+			"phy", "common", "cfg".
+		For "qcom,msm8996-qmp-usb3-phy" must contain
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -79,9 +91,10 @@ Required properties for child node:
 
  - #phy-cells: must be 0
 
+Required properties child node of pcie and usb3 qmp phys:
  - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
  - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
@@ -91,9 +104,11 @@ Required properties for child node:
 			(or)
 		  "pcie20_phy1_pipe_clk"
 
+Required properties for child node of PHYs with lane reset, AKA:
+	"qcom,msm8996-qmp-pcie-phy"
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
 		 "lane<lane-number>" for reset specific to each lane.
 
 Example:

Documentation/devicetree/bindings/spi/spi-uniphier.txt

@@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
  - compatible: should be "socionext,uniphier-scssi"
  - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
+ - interrupts: a single interrupt specifier
- - #size-cells: must be <0>, see spi-bus.txt
+ - pinctrl-names: should be "default"
- - clocks: A phandle to the clock for the device.
+ - pinctrl-0: pin control state for the default mode
- - resets: A phandle to the reset control for the device.
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device
 
 Example:
 
 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
+	interrupts = <0 39 4>;
-	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;
 };

Documentation/input/event-codes.rst

@@ -190,16 +190,7 @@ A few EV_REL codes have special meanings:
 * REL_WHEEL, REL_HWHEEL:
 
   - These codes are used for vertical and horizontal scroll wheels,
-    respectively. The value is the number of "notches" moved on the wheel, the
+    respectively.
-    physical size of which varies by device. For high-resolution wheels (which
-    report multiple events for each notch of movement, or do not have notches)
-    this may be an approximation based on the high-resolution scroll events.
-
-* REL_WHEEL_HI_RES:
-
-  - If a vertical scroll wheel supports high-resolution scrolling, this code
-    will be emitted in addition to REL_WHEEL. The value is the (approximate)
-    distance travelled by the user's finger, in microns.
 
 EV_ABS
 ------

Documentation/media/uapi/v4l/dev-meta.rst

@@ -40,7 +40,7 @@ To use the :ref:`format` ioctls applications set the ``type`` field of the
 the desired operation. Both drivers and applications must set the remainder of
 the :c:type:`v4l2_format` structure to 0.
 
-.. _v4l2-meta-format:
+.. c:type:: v4l2_meta_format
 
 .. tabularcolumns:: |p{1.4cm}|p{2.2cm}|p{13.9cm}|
 

Documentation/media/uapi/v4l/vidioc-g-fmt.rst

@@ -132,6 +132,11 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical
       - ``sdr``
       - Definition of a data format, see :ref:`pixfmt`, used by SDR
 	capture and output devices.
+    * -
+      - struct :c:type:`v4l2_meta_format`
+      - ``meta``
+      - Definition of a metadata format, see :ref:`meta-formats`, used by
+	metadata capture devices.
     * -
       - __u8
       - ``raw_data``\ [200]

Documentation/networking/rxrpc.txt

@@ -1056,18 +1056,23 @@ The kernel interface functions are as follows:
 
 	u32 rxrpc_kernel_check_life(struct socket *sock,
 				    struct rxrpc_call *call);
+	void rxrpc_kernel_probe_life(struct socket *sock,
+				     struct rxrpc_call *call);
 
-     This returns a number that is updated when ACKs are received from the peer
+     The first function returns a number that is updated when ACKs are received
-     (notably including PING RESPONSE ACKs which we can elicit by sending PING
+     from the peer (notably including PING RESPONSE ACKs which we can elicit by
-     ACKs to see if the call still exists on the server).  The caller should
+     sending PING ACKs to see if the call still exists on the server).  The
-     compare the numbers of two calls to see if the call is still alive after
+     caller should compare the numbers of two calls to see if the call is still
-     waiting for a suitable interval.
+     alive after waiting for a suitable interval.
 
      This allows the caller to work out if the server is still contactable and
      if the call is still alive on the server whilst waiting for the server to
      process a client operation.
 
-     This function may transmit a PING ACK.
+     The second function causes a ping ACK to be transmitted to try to provoke
+     the peer into responding, which would then cause the value returned by the
+     first function to change.  Note that this must be called in TASK_RUNNING
+     state.
 
  (*) Get reply timestamp.
 

Documentation/userspace-api/spec_ctrl.rst

@@ -92,3 +92,12 @@ Speculation misfeature controls
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
    * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
+
+- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
+                        (Mitigate Spectre V2 style attacks against user processes)
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);

Documentation/x86/boot.txt

@@ -61,18 +61,6 @@ Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
 	 	to struct boot_params for loading bzImage and ramdisk
 		above 4G in 64bit.
 
-Protocol 2.13:	(Kernel 3.14) Support 32- and 64-bit flags being set in
-		xloadflags to support booting a 64-bit kernel from 32-bit
-		EFI
-
-Protocol 2.14:	(Kernel 4.20) Added acpi_rsdp_addr holding the physical
-		address of the ACPI RSDP table.
-		The bootloader updates version with:
-		0x8000 | min(kernel-version, bootloader-version)
-		kernel-version being the protocol version supported by
-		the kernel and bootloader-version the protocol version
-		supported by the bootloader.
-
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -209,7 +197,6 @@ Offset	Proto	Name		Meaning
 0258/8	2.10+	pref_address	Preferred loading address
 0260/4	2.10+	init_size	Linear memory required during initialization
 0264/4	2.11+	handover_offset	Offset of handover entry point
-0268/8	2.14+	acpi_rsdp_addr	Physical address of RSDP table
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.
@@ -322,7 +309,7 @@ Protocol:	2.00+
   Contains the magic number "HdrS" (0x53726448).
 
 Field name:	version
-Type:		modify
+Type:		read
 Offset/size:	0x206/2
 Protocol:	2.00+
 
@@ -330,12 +317,6 @@ Protocol:	2.00+
   e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
   10.17.
 
-  Up to protocol version 2.13 this information is only read by the
-  bootloader. From protocol version 2.14 onwards the bootloader will
-  write the used protocol version or-ed with 0x8000 to the field. The
-  used protocol version will be the minimum of the supported protocol
-  versions of the bootloader and the kernel.
-
 Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
@@ -763,17 +744,6 @@ Offset/size:	0x264/4
 
   See EFI HANDOVER PROTOCOL below for more details.
 
-Field name:	acpi_rsdp_addr
-Type:		write
-Offset/size:	0x268/8
-Protocol:	2.14+
-
-  This field can be set by the boot loader to tell the kernel the
-  physical address of the ACPI RSDP table.
-
-  A value of 0 indicates the kernel should fall back to the standard
-  methods to locate the RSDP.
-
 
 **** THE IMAGE CHECKSUM
 

MAINTAINERS

@@ -180,6 +180,7 @@ F:	drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
 M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
+M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
@@ -717,7 +718,7 @@ F:	include/linux/mfd/altera-a10sr.h
 F:	include/dt-bindings/reset/altr,rst-mgr-a10sr.h
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
-M:	Vince Bridgers <vbridger@opensource.altera.com>
+M:	Thor Thayer <thor.thayer@linux.intel.com>
 L:	netdev@vger.kernel.org
 L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
@@ -1737,13 +1738,17 @@ ARM/Mediatek SoC support
 M:	Matthias Brugger <matthias.bgg@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
+W:	https://mtk.bcnfs.org/
+C:	irc://chat.freenode.net/linux-mediatek
 S:	Maintained
 F:	arch/arm/boot/dts/mt6*
 F:	arch/arm/boot/dts/mt7*
 F:	arch/arm/boot/dts/mt8*
 F:	arch/arm/mach-mediatek/
 F:	arch/arm64/boot/dts/mediatek/
+F:	drivers/soc/mediatek/
 N:	mtk
+N:	mt[678]
 K:	mediatek
 
 ARM/Mediatek USB3 PHY DRIVER
@@ -1922,7 +1927,6 @@ ARM/QUALCOMM SUPPORT
 M:	Andy Gross <andy.gross@linaro.org>
 M:	David Brown <david.brown@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
-L:	linux-soc@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom-*.dts
@@ -2490,7 +2494,7 @@ F:	drivers/net/wireless/ath/*
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
-M:	"Luis R. Rodriguez" <mcgrof@do-not-panic.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
@@ -2800,7 +2804,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
 Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
 S:	Supported
-F:	arch/x86/net/bpf_jit*
+F:	arch/*/net/*
 F:	Documentation/networking/filter.txt
 F:	Documentation/bpf/
 F:	include/linux/bpf*
@@ -2820,6 +2824,67 @@ F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/
 
+BPF JIT for ARM
+M:	Shubham Bansal <illusionist.neo@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/arm/net/
+
+BPF JIT for ARM64
+M:	Daniel Borkmann <daniel@iogearbox.net>
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Zi Shen Lim <zlim.lnx@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/arm64/net/
+
+BPF JIT for MIPS (32-BIT AND 64-BIT)
+M:	Paul Burton <paul.burton@mips.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/mips/net/
+
+BPF JIT for NFP NICs
+M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/ethernet/netronome/nfp/bpf/
+
+BPF JIT for POWERPC (32-BIT AND 64-BIT)
+M:	Naveen N. Rao <naveen.n.rao@linux.ibm.com>
+M:	Sandipan Das <sandipan@linux.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/powerpc/net/
+
+BPF JIT for S390
+M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/s390/net/
+X:	arch/s390/net/pnet.c
+
+BPF JIT for SPARC (32-BIT AND 64-BIT)
+M:	David S. Miller <davem@davemloft.net>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/sparc/net/
+
+BPF JIT for X86 32-BIT
+M:	Wang YanQing <udknight@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/x86/net/bpf_jit_comp32.c
+
+BPF JIT for X86 64-BIT
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/x86/net/
+X:	arch/x86/net/bpf_jit_comp32.c
+
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <michael.chan@broadcom.com>
 L:	netdev@vger.kernel.org
@@ -2860,7 +2925,7 @@ F:	drivers/staging/vc04_services
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/mips/brcm/
 F:	arch/mips/bcm47xx/*
@@ -2869,7 +2934,6 @@ F:	arch/mips/include/asm/mach-bcm47xx/*
 BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
@@ -2924,7 +2988,7 @@ F:	drivers/cpufreq/bmips-cpufreq.c
 BROADCOM BMIPS MIPS ARCHITECTURE
 M:	Kevin Cernekee <cernekee@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/mips/bmips/*
@@ -3015,7 +3079,6 @@ F:	drivers/net/ethernet/broadcom/genet/
 BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/broadcom/cygnus-linux.git
@@ -3062,7 +3125,7 @@ F:	include/uapi/rdma/bnxt_re-abi.h
 
 BROADCOM NVRAM DRIVER
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/firmware/broadcom/*
 
@@ -3276,6 +3339,12 @@ F:	include/uapi/linux/caif/
 F:	include/net/caif/
 F:	net/caif/
 
+CAKE QDISC
+M:	Toke Høiland-Jørgensen <toke@toke.dk>
+L:	cake@lists.bufferbloat.net (moderated for non-subscribers)
+S:	Maintained
+F:	net/sched/sch_cake.c
+
 CALGARY x86-64 IOMMU
 M:	Muli Ben-Yehuda <mulix@mulix.org>
 M:	Jon Mason <jdmason@kudzu.us>
@@ -4158,7 +4227,7 @@ F:	net/decnet/
 
 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/wiki/DECstation
 S:	Maintained
 F:	arch/mips/dec/
@@ -5249,7 +5318,7 @@ EDAC-CAVIUM OCTEON
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	David Daney <david.daney@cavium.com>
 L:	linux-edac@vger.kernel.org
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	drivers/edac/octeon_edac*
 
@@ -5528,6 +5597,7 @@ F:	net/bridge/
 ETHERNET PHY LIBRARY
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-mdio
@@ -5766,7 +5836,7 @@ F:	include/uapi/linux/firewire*.h
 F:	tools/firewire/
 
 FIRMWARE LOADER (request_firmware)
-M:	Luis R. Rodriguez <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware_class/
@@ -6299,6 +6369,7 @@ F:	tools/testing/selftests/gpio/
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
+M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-gpio@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
 S:	Maintained
@@ -7436,6 +7507,20 @@ S:	Maintained
 F:	Documentation/fb/intelfb.txt
 F:	drivers/video/fbdev/intelfb/
 
+INTEL GPIO DRIVERS
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+L:	linux-gpio@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
+F:	drivers/gpio/gpio-ich.c
+F:	drivers/gpio/gpio-intel-mid.c
+F:	drivers/gpio/gpio-lynxpoint.c
+F:	drivers/gpio/gpio-merrifield.c
+F:	drivers/gpio/gpio-ml-ioh.c
+F:	drivers/gpio/gpio-pch.c
+F:	drivers/gpio/gpio-sch.c
+F:	drivers/gpio/gpio-sodaville.c
+
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:	Zhenyu Wang <zhenyuw@linux.intel.com>
 M:	Zhi Wang <zhi.a.wang@intel.com>
@@ -7446,12 +7531,6 @@ T:	git https://github.com/intel/gvt-linux.git
 S:	Supported
 F:	drivers/gpu/drm/i915/gvt/
 
-INTEL PMIC GPIO DRIVER
-R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-S:	Maintained
-F:	drivers/gpio/gpio-*cove.c
-F:	drivers/gpio/gpio-msic.c
-
 INTEL HID EVENT DRIVER
 M:	Alex Hung <alex.hung@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -7539,12 +7618,6 @@ W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/platform/x86/intel_menlow.c
 
-INTEL MERRIFIELD GPIO DRIVER
-M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-L:	linux-gpio@vger.kernel.org
-S:	Maintained
-F:	drivers/gpio/gpio-merrifield.c
-
 INTEL MIC DRIVERS (mic)
 M:	Sudeep Dutt <sudeep.dutt@intel.com>
 M:	Ashutosh Dixit <ashutosh.dixit@intel.com>
@@ -7577,6 +7650,13 @@ F:	drivers/platform/x86/intel_punit_ipc.c
 F:	arch/x86/include/asm/intel_pmc_ipc.h
 F:	arch/x86/include/asm/intel_punit_ipc.h
 
+INTEL PMIC GPIO DRIVERS
+M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
+F:	drivers/gpio/gpio-*cove.c
+F:	drivers/gpio/gpio-msic.c
+
 INTEL MULTIFUNCTION PMIC DEVICE DRIVERS
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
@@ -7685,7 +7765,7 @@ F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
 
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sgi/ioc3-eth.c
 
@@ -8056,7 +8136,7 @@ F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*
 
 KERNEL USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/umh.c
@@ -8113,7 +8193,7 @@ F:	arch/arm64/kvm/
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/include/asm/kvm*
@@ -8232,7 +8312,7 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
 KMOD KERNEL MODULE LOADER - USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/kmod.c
@@ -8286,7 +8366,7 @@ F:	drivers/net/dsa/lantiq_gswip.c
 
 LANTIQ MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/lantiq
 F:	drivers/soc/lantiq
@@ -8849,7 +8929,7 @@ S:	Maintained
 
 MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
 M:	Rahul Bedarkar <rahulbedarkar89@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/img/pistachio_marduk.dts
 
@@ -9808,7 +9888,7 @@ F:	drivers/dma/at_xdmac.c
 
 MICROSEMI MIPS SOCS
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/generic/board-ocelot.c
 F:	arch/mips/configs/generic/board-ocelot.config
@@ -9848,7 +9928,7 @@ MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	Paul Burton <paul.burton@mips.com>
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/
 T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
@@ -9861,7 +9941,7 @@ F:	drivers/platform/mips/
 
 MIPS BOSTON DEVELOPMENT BOARD
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/img,boston-clock.txt
 F:	arch/mips/boot/dts/img/boston.dts
@@ -9871,7 +9951,7 @@ F:	include/dt-bindings/clock/boston-clock.h
 
 MIPS GENERIC PLATFORM
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 F:	arch/mips/generic/
@@ -9879,7 +9959,7 @@ F:	arch/mips/tools/generic-board-config.sh
 
 MIPS/LOONGSON1 ARCHITECTURE
 M:	Keguang Zhang <keguang.zhang@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson32/
 F:	arch/mips/include/asm/mach-loongson32/
@@ -9888,7 +9968,7 @@ F:	drivers/*/*/*loongson1*
 
 MIPS/LOONGSON2 ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/fuloong-2e/
 F:	arch/mips/loongson64/lemote-2f/
@@ -9898,7 +9978,7 @@ F:	drivers/*/*/*loongson2*
 
 MIPS/LOONGSON3 ARCHITECTURE
 M:	Huacai Chen <chenhc@lemote.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/
 F:	arch/mips/include/asm/mach-loongson64/
@@ -9908,7 +9988,7 @@ F:	drivers/*/*/*loongson3*
 
 MIPS RINT INSTRUCTION EMULATION
 M:	Aleksandar Markovic <aleksandar.markovic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/math-emu/sp_rint.c
 F:	arch/mips/math-emu/dp_rint.c
@@ -9922,12 +10002,9 @@ S:	Odd Fixes
 F:	drivers/media/radio/radio-miropcm20*
 
 MMP SUPPORT
-M:	Eric Miao <eric.y.miao@gmail.com>
+R:	Lubomir Rintel <lkundrak@v3.sk>
-M:	Haojian Zhuang <haojian.zhuang@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://github.com/hzhuang1/linux.git
+S:	Odd Fixes
-T:	git git://git.linaro.org/people/ycmiao/pxa-linux.git
-S:	Maintained
 F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/
 
@@ -10808,9 +10885,9 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/
 
 OMAP MMC SUPPORT
-M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
+M:	Aaro Koskinen <aaro.koskinen@iki.fi>
 L:	linux-omap@vger.kernel.org
-S:	Maintained
+S:	Odd Fixes
 F:	drivers/mmc/host/omap.c
 
 OMAP POWER MANAGEMENT SUPPORT
@@ -10893,7 +10970,7 @@ F:	include/linux/platform_data/i2c-omap.h
 
 ONION OMEGA2+ BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/omega2p.dts
 
@@ -11745,6 +11822,7 @@ F:	Documentation/devicetree/bindings/pinctrl/fsl,*
 PIN CONTROLLER - INTEL
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
 S:	Maintained
 F:	drivers/pinctrl/intel/
 
@@ -11801,7 +11879,7 @@ F:	drivers/pinctrl/spear/
 
 PISTACHIO SOC SUPPORT
 M:	James Hartley <james.hartley@sondrel.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Odd Fixes
 F:	arch/mips/pistachio/
 F:	arch/mips/include/asm/mach-pistachio/
@@ -11981,7 +12059,7 @@ F:	kernel/printk/
 F:	include/linux/printk.h
 
 PRISM54 WIRELESS DRIVER
-M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
@@ -11995,9 +12073,10 @@ S:	Maintained
 F:	fs/proc/
 F:	include/linux/proc_fs.h
 F:	tools/testing/selftests/proc/
+F:	Documentation/filesystems/proc.txt
 
 PROC SYSCTL
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 M:	Kees Cook <keescook@chromium.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
@@ -12460,7 +12539,7 @@ F:	drivers/media/usb/rainshadow-cec/*
 
 RALINK MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/ralink
 
@@ -12480,7 +12559,7 @@ F:	drivers/block/brd.c
 
 RANCHU VIRTUAL BOARD FOR MIPS
 M:	Miodrag Dinic <miodrag.dinic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/generic/board-ranchu.c
 F:	arch/mips/configs/generic/board-ranchu.config
@@ -13930,6 +14009,7 @@ S:	Supported
 F:	Documentation/devicetree/bindings/sound/
 F:	Documentation/sound/soc/
 F:	sound/soc/
+F:	include/dt-bindings/sound/
 F:	include/sound/soc*
 
 SOUNDWIRE SUBSYSTEM
@@ -13977,11 +14057,10 @@ F:	drivers/tty/serial/sunzilog.h
 F:	drivers/tty/vcc.c
 
 SPARSE CHECKER
-M:	"Christopher Li" <sparse@chrisli.org>
+M:	"Luc Van Oostenryck" <luc.vanoostenryck@gmail.com>
 L:	linux-sparse@vger.kernel.org
 W:	https://sparse.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/devel/sparse/sparse.git
-T:	git git://git.kernel.org/pub/scm/devel/sparse/chrisl/sparse.git
 S:	Maintained
 F:	include/linux/compiler.h
 
@@ -14078,6 +14157,7 @@ F:	Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
 
 STABLE BRANCH
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Sasha Levin <sashal@kernel.org>
 L:	stable@vger.kernel.org
 S:	Supported
 F:	Documentation/process/stable-kernel-rules.rst
@@ -15215,7 +15295,7 @@ F:	arch/um/os-Linux/drivers/
 TURBOCHANNEL SUBSYSTEM
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Maintained
 F:	drivers/tc/
@@ -16036,7 +16116,7 @@ F:	drivers/net/vmxnet3/
 
 VOCORE VOCORE2 BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/vocore2.dts
 

Makefile

@@ -2,8 +2,8 @@
 VERSION = 4
 PATCHLEVEL = 20
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
-NAME = "People's Front"
+NAME = Shy Crocodile
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arm/boot/dts/am335x-pdu001.dts

@@ -585,7 +585,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {

arch/arm/boot/dts/am3517-evm.dts

@@ -228,7 +228,7 @@
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };
 
 &mmc3 {

arch/arm/boot/dts/am3517-som.dtsi

@@ -163,7 +163,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};

arch/arm/boot/dts/arm-realview-pb1176.dts

@@ -45,7 +45,7 @@
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,7 +53,7 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;

arch/arm/boot/dts/arm-realview-pb11mp.dts

@@ -145,7 +145,7 @@
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -153,7 +153,7 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;

arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts

@@ -31,7 +31,7 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
 	};
 };
 

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -26,7 +26,7 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
 	};
 };
 

arch/arm/boot/dts/imx51-zii-rdu1.dts

@@ -492,12 +492,6 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;

arch/arm/boot/dts/imx7d-nitrogen7.dts

@@ -86,13 +86,17 @@
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "slow";
 		regulator-name = "reg_wlan";
 		startup-delay-us = <70000>;
 		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
 };
 
 &adc1 {
@@ -375,6 +379,7 @@
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wlan>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
 	cap-power-off-card;
 	keep-power-in-suspend;
 	status = "okay";

arch/arm/boot/dts/imx7d-pico.dtsi

@@ -100,6 +100,19 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
 };
 
 &i2c4 {
@@ -199,12 +212,13 @@
 
 &usdhc2 { /* Wifi SDIO */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
 	no-1-8-v;
 	non-removable;
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_ap6212>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
 	status = "okay";
 };
 
@@ -301,6 +315,12 @@
 };
 
 &iomuxc_lpsr {
+	pinctrl_wifi_clk: wificlkgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -129,7 +129,7 @@
 };
 
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;

arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts

@@ -35,7 +35,7 @@
  * jumpering combinations for the long run.
  */
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;

arch/arm/boot/dts/omap4-sdp.dts

@@ -33,6 +33,7 @@
 		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
+		startup-delay-us = <25000>;
 	};
 
 	vbat: fixedregulator-vbat {

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -701,6 +701,7 @@
 };
 
 &dwc3 {
+	extcon = <&extcon_usb3>;
 	dr_mode = "otg";
 };
 

arch/arm/boot/dts/rk3288-veyron.dtsi

@@ -10,7 +10,11 @@
 #include "rk3288.dtsi"
 
 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

arch/arm/boot/dts/sama5d2.dtsi

@@ -314,7 +314,7 @@
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";
 
 			nand_controller: nand-controller {

arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts

@@ -314,8 +314,8 @@
 
 &reg_dldo3 {
 	regulator-always-on;
-	regulator-min-microvolt = <2500000>;
+	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <2500000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-pd";
 };
 

arch/arm/include/asm/cputype.h

@@ -111,6 +111,7 @@
 #include <linux/kernel.h>
 
 extern unsigned int processor_id;
+struct proc_info_list *lookup_processor(u32 midr);
 
 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\

arch/arm/include/asm/proc-fns.h

@@ -23,7 +23,7 @@ struct mm_struct;
 /*
  * Don't change this structure - ASM code relies on it.
  */
-extern struct processor {
+struct processor {
 	/* MISC
 	 * get data abort address/flags
 	 */
@@ -79,9 +79,13 @@ extern struct processor {
 	unsigned int suspend_size;
 	void (*do_suspend)(void *);
 	void (*do_resume)(void *);
-} processor;
+};
 
 #ifndef MULTI_CPU
+static inline void init_proc_vtable(const struct processor *p)
+{
+}
+
 extern void cpu_proc_init(void);
 extern void cpu_proc_fin(void);
 extern int cpu_do_idle(void);
@@ -98,17 +102,50 @@ extern void cpu_reset(unsigned long addr, bool hvc) __attribute__((noreturn));
 extern void cpu_do_suspend(void *);
 extern void cpu_do_resume(void *);
 #else
-#define cpu_proc_init			processor._proc_init
-#define cpu_proc_fin			processor._proc_fin
-#define cpu_reset			processor.reset
-#define cpu_do_idle			processor._do_idle
-#define cpu_dcache_clean_area		processor.dcache_clean_area
-#define cpu_set_pte_ext			processor.set_pte_ext
-#define cpu_do_switch_mm		processor.switch_mm
 
-/* These three are private to arch/arm/kernel/suspend.c */
+extern struct processor processor;
-#define cpu_do_suspend			processor.do_suspend
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
-#define cpu_do_resume			processor.do_resume
+#include <linux/smp.h>
+/*
+ * This can't be a per-cpu variable because we need to access it before
+ * per-cpu has been initialised.  We have a couple of functions that are
+ * called in a pre-emptible context, and so can't use smp_processor_id()
+ * there, hence PROC_TABLE().  We insist in init_proc_vtable() that the
+ * function pointers for these are identical across all CPUs.
+ */
+extern struct processor *cpu_vtable[];
+#define PROC_VTABLE(f)			cpu_vtable[smp_processor_id()]->f
+#define PROC_TABLE(f)			cpu_vtable[0]->f
+static inline void init_proc_vtable(const struct processor *p)
+{
+	unsigned int cpu = smp_processor_id();
+	*cpu_vtable[cpu] = *p;
+	WARN_ON_ONCE(cpu_vtable[cpu]->dcache_clean_area !=
+		     cpu_vtable[0]->dcache_clean_area);
+	WARN_ON_ONCE(cpu_vtable[cpu]->set_pte_ext !=
+		     cpu_vtable[0]->set_pte_ext);
+}
+#else
+#define PROC_VTABLE(f)			processor.f
+#define PROC_TABLE(f)			processor.f
+static inline void init_proc_vtable(const struct processor *p)
+{
+	processor = *p;
+}
+#endif
+
+#define cpu_proc_init			PROC_VTABLE(_proc_init)
+#define cpu_check_bugs			PROC_VTABLE(check_bugs)
+#define cpu_proc_fin			PROC_VTABLE(_proc_fin)
+#define cpu_reset			PROC_VTABLE(reset)
+#define cpu_do_idle			PROC_VTABLE(_do_idle)
+#define cpu_dcache_clean_area		PROC_TABLE(dcache_clean_area)
+#define cpu_set_pte_ext			PROC_TABLE(set_pte_ext)
+#define cpu_do_switch_mm		PROC_VTABLE(switch_mm)
+
+/* These two are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend			PROC_VTABLE(do_suspend)
+#define cpu_do_resume			PROC_VTABLE(do_resume)
 #endif
 
 extern void cpu_resume(void);

arch/arm/kernel/bugs.c

@@ -6,8 +6,8 @@
 void check_other_bugs(void)
 {
 #ifdef MULTI_CPU
-	if (processor.check_bugs)
+	if (cpu_check_bugs)
-		processor.check_bugs();
+		cpu_check_bugs();
 #endif
 }
 

arch/arm/kernel/ftrace.c

@@ -183,9 +183,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
-	struct ftrace_graph_ent trace;
 	unsigned long old;
-	int err;
 
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@@ -193,21 +191,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	old = *parent;
 	*parent = return_hooker;
 
-	trace.func = self_addr;
+	if (function_graph_enter(old, self_addr, frame_pointer, NULL))
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
 		*parent = old;
-		return;
-	}
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY) {
-		*parent = old;
-		return;
-	}
 }
 
 #ifdef CONFIG_DYNAMIC_FTRACE

arch/arm/kernel/head-common.S

@@ -145,6 +145,9 @@ __mmap_switched_data:
 #endif
 	.size	__mmap_switched_data, . - __mmap_switched_data
 
+	__FINIT
+	.text
+
 /*
  * This provides a C-API version of __lookup_processor_type
  */
@@ -156,9 +159,6 @@ ENTRY(lookup_processor_type)
 	ldmfd	sp!, {r4 - r6, r9, pc}
 ENDPROC(lookup_processor_type)
 
-	__FINIT
-	.text
-
 /*
  * Read processor ID register (CP#15, CR0), and look up in the linker-built
  * supported processor list.  Note that we can't use the absolute addresses

arch/arm/kernel/setup.c

@@ -114,6 +114,11 @@ EXPORT_SYMBOL(elf_hwcap2);
 
 #ifdef MULTI_CPU
 struct processor processor __ro_after_init;
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+struct processor *cpu_vtable[NR_CPUS] = {
+	[0] = &processor,
+};
+#endif
 #endif
 #ifdef MULTI_TLB
 struct cpu_tlb_fns cpu_tlb __ro_after_init;
@@ -666,28 +671,33 @@ static void __init smp_build_mpidr_hash(void)
 }
 #endif
 
+/*
+ * locate processor in the list of supported processor types.  The linker
+ * builds this table for us from the entries in arch/arm/mm/proc-*.S
+ */
+struct proc_info_list *lookup_processor(u32 midr)
+{
+	struct proc_info_list *list = lookup_processor_type(midr);
+
+	if (!list) {
+		pr_err("CPU%u: configuration botched (ID %08x), CPU halted\n",
+		       smp_processor_id(), midr);
+		while (1)
+		/* can't use cpu_relax() here as it may require MMU setup */;
+	}
+
+	return list;
+}
+
 static void __init setup_processor(void)
 {
-	struct proc_info_list *list;
+	unsigned int midr = read_cpuid_id();
-
+	struct proc_info_list *list = lookup_processor(midr);
-	/*
-	 * locate processor in the list of supported processor
-	 * types.  The linker builds this table for us from the
-	 * entries in arch/arm/mm/proc-*.S
-	 */
-	list = lookup_processor_type(read_cpuid_id());
-	if (!list) {
-		pr_err("CPU configuration botched (ID %08x), unable to continue.\n",
-		       read_cpuid_id());
-		while (1);
-	}
 
 	cpu_name = list->cpu_name;
 	__cpu_architecture = __get_cpu_architecture();
 
-#ifdef MULTI_CPU
+	init_proc_vtable(list->proc);
-	processor = *list->proc;
-#endif
 #ifdef MULTI_TLB
 	cpu_tlb = *list->tlb;
 #endif
@@ -699,7 +709,7 @@ static void __init setup_processor(void)
 #endif
 
 	pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
-		cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
+		list->cpu_name, midr, midr & 15,
 		proc_arch[cpu_architecture()], get_cr());
 
 	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",

arch/arm/kernel/smp.c

@@ -42,6 +42,7 @@
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/procinfo.h>
 #include <asm/processor.h>
 #include <asm/sections.h>
 #include <asm/tlbflush.h>
@@ -102,6 +103,30 @@ static unsigned long get_arch_pgd(pgd_t *pgd)
 #endif
 }
 
+#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+	if (!cpu_vtable[cpu])
+		cpu_vtable[cpu] = kzalloc(sizeof(*cpu_vtable[cpu]), GFP_KERNEL);
+
+	return cpu_vtable[cpu] ? 0 : -ENOMEM;
+}
+
+static void secondary_biglittle_init(void)
+{
+	init_proc_vtable(lookup_processor(read_cpuid_id())->proc);
+}
+#else
+static int secondary_biglittle_prepare(unsigned int cpu)
+{
+	return 0;
+}
+
+static void secondary_biglittle_init(void)
+{
+}
+#endif
+
 int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
@@ -109,6 +134,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	if (!smp_ops.smp_boot_secondary)
 		return -ENOSYS;
 
+	ret = secondary_biglittle_prepare(cpu);
+	if (ret)
+		return ret;
+
 	/*
 	 * We need to tell the secondary core where to find
 	 * its stack and the page tables.
@@ -359,6 +388,8 @@ asmlinkage void secondary_start_kernel(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu;
 
+	secondary_biglittle_init();
+
 	/*
 	 * The identity mapping is uncached (strongly ordered), so
 	 * switch away from it before attempting any exclusive accesses.

arch/arm/mach-davinci/da830.c

@@ -759,7 +759,9 @@ static struct davinci_id da830_ids[] = {
 };
 
 static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.ngpio = 128,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 128,
 };
 
 int __init da830_register_gpio(void)

arch/arm/mach-davinci/da850.c

@@ -719,7 +719,9 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 }
 
 static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.ngpio = 144,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 144,
 };
 
 int __init da850_register_gpio(void)

arch/arm/mach-davinci/devices-da8xx.c

@@ -701,6 +701,46 @@ static struct resource da8xx_gpio_resources[] = {
 	},
 	{ /* interrupt */
 		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO1,
+		.end	= IRQ_DA8XX_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO2,
+		.end	= IRQ_DA8XX_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO3,
+		.end	= IRQ_DA8XX_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO4,
+		.end	= IRQ_DA8XX_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO5,
+		.end	= IRQ_DA8XX_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO6,
+		.end	= IRQ_DA8XX_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO7,
+		.end	= IRQ_DA8XX_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO8,
 		.end	= IRQ_DA8XX_GPIO8,
 		.flags	= IORESOURCE_IRQ,
 	},

arch/arm/mach-davinci/dm355.c

@@ -548,12 +548,44 @@ static struct resource dm355_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK1,
+		.end	= IRQ_DM355_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK2,
+		.end	= IRQ_DM355_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK3,
+		.end	= IRQ_DM355_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK4,
+		.end	= IRQ_DM355_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK5,
+		.end	= IRQ_DM355_GPIOBNK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK6,
 		.end	= IRQ_DM355_GPIOBNK6,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 };
 

arch/arm/mach-davinci/dm365.c

@@ -267,12 +267,49 @@ static struct resource dm365_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO1,
+		.end	= IRQ_DM365_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO2,
+		.end	= IRQ_DM365_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO3,
+		.end	= IRQ_DM365_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO4,
+		.end	= IRQ_DM365_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO5,
+		.end	= IRQ_DM365_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO6,
+		.end	= IRQ_DM365_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO7,
 		.end	= IRQ_DM365_GPIO7,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 	.gpio_unbanked	= 8,
 };

arch/arm/mach-davinci/dm644x.c

@@ -492,12 +492,34 @@ static struct resource dm644_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK1,
+		.end	= IRQ_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK2,
+		.end	= IRQ_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK3,
+		.end	= IRQ_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK4,
 		.end	= IRQ_GPIOBNK4,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 71,
 };
 

arch/arm/mach-davinci/dm646x.c

@@ -442,12 +442,24 @@ static struct resource dm646x_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK1,
+		.end	= IRQ_DM646X_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK2,
 		.end	= IRQ_DM646X_GPIOBNK2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 43,
 };
 

arch/arm/mach-imx/cpuidle-imx6sx.c

@@ -110,7 +110,7 @@ int __init imx6sx_cpuidle_init(void)
 	 * except for power up sw2iso which need to be
 	 * larger than LDO ramp up time.
 	 */
-	imx_gpc_set_arm_power_up_timing(2, 1);
+	imx_gpc_set_arm_power_up_timing(0xf, 1);
 	imx_gpc_set_arm_power_down_timing(1, 1);
 
 	return cpuidle_register(&imx6sx_cpuidle_driver, NULL);

arch/arm/mach-mmp/cputype.h

@@ -44,10 +44,12 @@ static inline int cpu_is_pxa910(void)
 #define cpu_is_pxa910()	(0)
 #endif
 
-#ifdef CONFIG_CPU_MMP2
+#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT)
 static inline int cpu_is_mmp2(void)
 {
-	return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x58) &&
+		(((mmp_chip_id & 0xfff) == 0x410) ||
+		 ((mmp_chip_id & 0xfff) == 0x610));
 }
 #else
 #define cpu_is_mmp2()	(0)

arch/arm/mach-omap1/board-ams-delta.c

@@ -246,8 +246,8 @@ static struct platform_device latch2_gpio_device = {
 #define LATCH2_PIN_SCARD_CMDVCC		11
 #define LATCH2_PIN_MODEM_NRESET		12
 #define LATCH2_PIN_MODEM_CODEC		13
-#define LATCH2_PIN_HOOKFLASH1		14
+#define LATCH2_PIN_AUDIO_MUTE		14
-#define LATCH2_PIN_HOOKFLASH2		15
+#define LATCH2_PIN_HOOKFLASH		15
 
 static struct regulator_consumer_supply modem_nreset_consumers[] = {
 	REGULATOR_SUPPLY("RESET#", "serial8250.1"),
@@ -594,6 +594,8 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
 static struct gpiod_hog ams_delta_gpio_hogs[] = {
 	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
 		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute",
+		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
 	{},
 };
 
@@ -764,6 +766,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 	struct modem_private_data *priv = port->private_data;
 	int ret;
 
+	if (!priv)
+		return;
+
 	if (IS_ERR(priv->regulator))
 		return;
 

arch/arm/mach-omap2/display.c

@@ -209,11 +209,61 @@ static int __init omapdss_init_fbdev(void)
 
 	return 0;
 }
-#else
+
-static inline int omapdss_init_fbdev(void)
+static const char * const omapdss_compat_names[] __initconst = {
+	"ti,omap2-dss",
+	"ti,omap3-dss",
+	"ti,omap4-dss",
+	"ti,omap5-dss",
+	"ti,dra7-dss",
+};
+
+static struct device_node * __init omapdss_find_dss_of_node(void)
 {
-	return 0;
+	struct device_node *node;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) {
+		node = of_find_compatible_node(NULL, NULL,
+			omapdss_compat_names[i]);
+		if (node)
+			return node;
+	}
+
+	return NULL;
 }
+
+static int __init omapdss_init_of(void)
+{
+	int r;
+	struct device_node *node;
+	struct platform_device *pdev;
+
+	/* only create dss helper devices if dss is enabled in the .dts */
+
+	node = omapdss_find_dss_of_node();
+	if (!node)
+		return 0;
+
+	if (!of_device_is_available(node))
+		return 0;
+
+	pdev = of_find_device_by_node(node);
+
+	if (!pdev) {
+		pr_err("Unable to find DSS platform device\n");
+		return -ENODEV;
+	}
+
+	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	if (r) {
+		pr_err("Unable to populate DSS submodule devices\n");
+		return r;
+	}
+
+	return omapdss_init_fbdev();
+}
+omap_device_initcall(omapdss_init_of);
 #endif /* CONFIG_FB_OMAP2 */
 
 static void dispc_disable_outputs(void)
@@ -361,58 +411,3 @@ int omap_dss_reset(struct omap_hwmod *oh)
 
 	return r;
 }
-
-static const char * const omapdss_compat_names[] __initconst = {
-	"ti,omap2-dss",
-	"ti,omap3-dss",
-	"ti,omap4-dss",
-	"ti,omap5-dss",
-	"ti,dra7-dss",
-};
-
-static struct device_node * __init omapdss_find_dss_of_node(void)
-{
-	struct device_node *node;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) {
-		node = of_find_compatible_node(NULL, NULL,
-			omapdss_compat_names[i]);
-		if (node)
-			return node;
-	}
-
-	return NULL;
-}
-
-static int __init omapdss_init_of(void)
-{
-	int r;
-	struct device_node *node;
-	struct platform_device *pdev;
-
-	/* only create dss helper devices if dss is enabled in the .dts */
-
-	node = omapdss_find_dss_of_node();
-	if (!node)
-		return 0;
-
-	if (!of_device_is_available(node))
-		return 0;
-
-	pdev = of_find_device_by_node(node);
-
-	if (!pdev) {
-		pr_err("Unable to find DSS platform device\n");
-		return -ENODEV;
-	}
-
-	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
-	if (r) {
-		pr_err("Unable to populate DSS submodule devices\n");
-		return r;
-	}
-
-	return omapdss_init_fbdev();
-}
-omap_device_initcall(omapdss_init_of);

arch/arm/mm/proc-v7-bugs.c

@@ -52,8 +52,6 @@ static void cpu_v7_spectre_init(void)
 	case ARM_CPU_PART_CORTEX_A17:
 	case ARM_CPU_PART_CORTEX_A73:
 	case ARM_CPU_PART_CORTEX_A75:
-		if (processor.switch_mm != cpu_v7_bpiall_switch_mm)
-			goto bl_error;
 		per_cpu(harden_branch_predictor_fn, cpu) =
 			harden_branch_predictor_bpiall;
 		spectre_v2_method = "BPIALL";
@@ -61,8 +59,6 @@ static void cpu_v7_spectre_init(void)
 
 	case ARM_CPU_PART_CORTEX_A15:
 	case ARM_CPU_PART_BRAHMA_B15:
-		if (processor.switch_mm != cpu_v7_iciallu_switch_mm)
-			goto bl_error;
 		per_cpu(harden_branch_predictor_fn, cpu) =
 			harden_branch_predictor_iciallu;
 		spectre_v2_method = "ICIALLU";
@@ -88,11 +84,9 @@ static void cpu_v7_spectre_init(void)
 					  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
 			if ((int)res.a0 != 0)
 				break;
-			if (processor.switch_mm != cpu_v7_hvc_switch_mm && cpu)
-				goto bl_error;
 			per_cpu(harden_branch_predictor_fn, cpu) =
 				call_hvc_arch_workaround_1;
-			processor.switch_mm = cpu_v7_hvc_switch_mm;
+			cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
 			spectre_v2_method = "hypervisor";
 			break;
 
@@ -101,11 +95,9 @@ static void cpu_v7_spectre_init(void)
 					  ARM_SMCCC_ARCH_WORKAROUND_1, &res);
 			if ((int)res.a0 != 0)
 				break;
-			if (processor.switch_mm != cpu_v7_smc_switch_mm && cpu)
-				goto bl_error;
 			per_cpu(harden_branch_predictor_fn, cpu) =
 				call_smc_arch_workaround_1;
-			processor.switch_mm = cpu_v7_smc_switch_mm;
+			cpu_do_switch_mm = cpu_v7_smc_switch_mm;
 			spectre_v2_method = "firmware";
 			break;
 
@@ -119,11 +111,6 @@ static void cpu_v7_spectre_init(void)
 	if (spectre_v2_method)
 		pr_info("CPU%u: Spectre v2: using %s workaround\n",
 			smp_processor_id(), spectre_v2_method);
-	return;
-
-bl_error:
-	pr_err("CPU%u: Spectre v2: incorrect context switching function, system vulnerable\n",
-		cpu);
 }
 #else
 static void cpu_v7_spectre_init(void)

arch/arm/vfp/vfpmodule.c

@@ -573,7 +573,7 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp *ufp,
 	 */
 	ufp_exc->fpexc = hwstate->fpexc;
 	ufp_exc->fpinst = hwstate->fpinst;
-	ufp_exc->fpinst2 = ufp_exc->fpinst2;
+	ufp_exc->fpinst2 = hwstate->fpinst2;
 
 	/* Ensure that VFP is disabled. */
 	vfp_flush_hwstate(thread);

arch/arm64/Kconfig

@@ -497,6 +497,24 @@ config ARM64_ERRATUM_1188873
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1286807
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds workaround for ARM Cortex-A76 erratum 1286807
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual
+	  address for a cacheable mapping of a location is being
+	  accessed by a core while another core is remapping the virtual
+	  address to a new physical page using the recommended
+	  break-before-make sequence, then under very rare circumstances
+	  TLBI+DSB completes before a read using the translation being
+	  invalidated has been observed by other observers. The
+	  workaround repeats the TLBI+DSB operation.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@@ -566,9 +584,16 @@ config QCOM_FALKOR_ERRATUM_1003
 	  is unchanged. Work around the erratum by invalidating the walk cache
 	  entries for the trampoline before entering the kernel proper.
 
+config ARM64_WORKAROUND_REPEAT_TLBI
+	bool
+	help
+	  Enable the repeat TLBI workaround for Falkor erratum 1009 and
+	  Cortex-A76 erratum 1286807.
+
 config QCOM_FALKOR_ERRATUM_1009
 	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
 	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  On Falkor v1, the CPU may prematurely complete a DSB following a
 	  TLBI xxIS invalidate maintenance operation. Repeat the TLBI operation

arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi

@@ -20,28 +20,24 @@
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x000>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x001>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x100>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x101>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 	};
 };

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -28,33 +28,6 @@
 		method = "smc";
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle_states {
-			entry_method = "arm,pcsi";
-
-			CPU_SLEEP_0: cpu-sleep-0 {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				arm,psci-suspend-param = <0x0010000>;
-				entry-latency-us = <80>;
-				exit-latency-us  = <160>;
-				min-residency-us = <320>;
-			};
-
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				arm,psci-suspend-param = <0x1010000>;
-				entry-latency-us = <500>;
-				exit-latency-us = <1000>;
-				min-residency-us = <2500>;
-			};
-		};
-	};
-
 	ap806 {
 		#address-cells = <2>;
 		#size-cells = <2>;

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts

@@ -16,8 +16,13 @@
 	model = "Bananapi BPI-R64";
 	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
 	};
 
 	cpus {

arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts

@@ -17,8 +17,13 @@
 	model = "MediaTek MT7622 RFB1 board";
 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
 	};
 
 	cpus {

arch/arm64/boot/dts/mediatek/mt7622.dtsi

@@ -227,16 +227,6 @@
 		#reset-cells = <1>;
 	};
 
-	timer: timer@10004000 {
-		compatible = "mediatek,mt7622-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0 0x10004000 0 0x80>;
-		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
-			 <&topckgen CLK_TOP_RTC>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
 	scpsys: scpsys@10006000 {
 		compatible = "mediatek,mt7622-scpsys",
 			     "syscon";

arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi

@@ -241,3 +241,7 @@
 		};
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};

arch/arm64/boot/dts/qcom/sdm845-mtp.dts

@@ -352,6 +352,10 @@
 	status = "okay";
 };
 
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
 &uart9 {
 	status = "okay";
 };

arch/arm64/boot/dts/renesas/r8a77995-draak.dts

@@ -195,7 +195,7 @@
 		compatible = "adi,adv7180cp";
 		reg = <0x20>;
 
-		port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts

@@ -153,7 +153,7 @@
 };
 
 &pcie0 {
-	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;

arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi

@@ -57,18 +57,6 @@
 		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 0>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
 };
 
 &cpu_l0 {

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts

@@ -97,7 +97,7 @@
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pcie_pwr_en>;
 		regulator-name = "vcc3v3_pcie";
@@ -293,12 +293,12 @@
 				};
 			};
 
-			vcc2v8_dvp: LDO_REG2 {
+			vcc3v0_touch: LDO_REG2 {
-				regulator-name = "vcc2v8_dvp";
+				regulator-name = "vcc3v0_touch";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <2800000>;
+				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -397,7 +397,9 @@
 	vdd_cpu_b: regulator@40 {
 		compatible = "silergy,syr827";
 		reg = <0x40>;
-		fcs,suspend-voltage-selector = <0>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -415,6 +417,8 @@
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -519,7 +523,7 @@
 
 	pcie {
 		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -529,7 +533,7 @@
 		};
 
 		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		vsel2_gpio: vsel2-gpio {

arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi

@@ -36,7 +36,7 @@
 
 	wkup_uart0: serial@42300000 {
 		compatible = "ti,am654-uart";
-		reg = <0x00 0x42300000 0x00 0x100>;
+		reg = <0x42300000 0x100>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/include/asm/ftrace.h

@@ -56,6 +56,19 @@ static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs)
 {
 	return is_compat_task();
 }
+
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	/*
+	 * Since all syscall functions have __arm64_ prefix, we must skip it.
+	 * However, as we described above, we decided to ignore compat
+	 * syscalls, so we don't care about __arm64_compat_ prefix here.
+	 */
+	return !strcmp(sym + 8, name);
+}
 #endif /* ifndef __ASSEMBLY__ */
 
 #endif /* __ASM_FTRACE_H */

arch/arm64/include/asm/sysreg.h

@@ -468,7 +468,7 @@
 			 SCTLR_ELx_SA     | SCTLR_ELx_I    | SCTLR_ELx_WXN | \
 			 SCTLR_ELx_DSSBS | ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)
 
-#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffff
+#if (SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != 0xffffffffffffffffUL
 #error "Inconsistent SCTLR_EL2 set/clear bits"
 #endif
 
@@ -509,7 +509,7 @@
 			 SCTLR_EL1_UMA | SCTLR_ELx_WXN     | ENDIAN_CLEAR_EL1 |\
 			 SCTLR_ELx_DSSBS | SCTLR_EL1_NTWI  | SCTLR_EL1_RES0)
 
-#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffff
+#if (SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != 0xffffffffffffffffUL
 #error "Inconsistent SCTLR_EL1 set/clear bits"
 #endif
 

arch/arm64/include/asm/tlbflush.h

@@ -41,14 +41,14 @@
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op,	       \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : )
 
 #define __TLBI_1(op, arg) asm ("tlbi " #op ", %0\n"			       \
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op ", %0",     \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : "r" (arg))
 
 #define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg)

arch/arm64/kernel/cpu_errata.c

@@ -570,6 +570,20 @@ static const struct midr_range arm64_harden_el2_vectors[] = {
 
 #endif
 
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
+
+static const struct midr_range arm64_repeat_tlbi_cpus[] = {
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+	MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1286807
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+#endif
+	{},
+};
+
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #if	defined(CONFIG_ARM64_ERRATUM_826319) || \
 	defined(CONFIG_ARM64_ERRATUM_827319) || \
@@ -695,11 +709,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.matches = is_kryo_midr,
 	},
 #endif
-#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
 	{
-		.desc = "Qualcomm Technologies Falkor erratum 1009",
+		.desc = "Qualcomm erratum 1009, ARM erratum 1286807",
 		.capability = ARM64_WORKAROUND_REPEAT_TLBI,
-		ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0),
+		ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus),
 	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_858921

arch/arm64/kernel/cpufeature.c

@@ -1333,7 +1333,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.cpu_enable = cpu_enable_hw_dbm,
 	},
 #endif
-#ifdef CONFIG_ARM64_SSBD
 	{
 		.desc = "CRC32 instructions",
 		.capability = ARM64_HAS_CRC32,
@@ -1343,6 +1342,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.field_pos = ID_AA64ISAR0_CRC32_SHIFT,
 		.min_field_value = 1,
 	},
+#ifdef CONFIG_ARM64_SSBD
 	{
 		.desc = "Speculative Store Bypassing Safe (SSBS)",
 		.capability = ARM64_SSBS,

arch/arm64/kernel/ftrace.c

@@ -216,8 +216,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
 	unsigned long old;
-	struct ftrace_graph_ent trace;
-	int err;
 
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@@ -229,18 +227,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 */
 	old = *parent;
 
-	trace.func = self_addr;
+	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY)
-		return;
-	else
 		*parent = return_hooker;
 }
 

arch/arm64/kernel/setup.c

@@ -313,6 +313,7 @@ void __init setup_arch(char **cmdline_p)
 	arm64_memblock_init();
 
 	paging_init();
+	efi_apply_persistent_mem_reservations();
 
 	acpi_table_upgrade();
 

arch/arm64/net/bpf_jit_comp.c

@@ -351,7 +351,8 @@ static void build_epilogue(struct jit_ctx *ctx)
  * >0 - successfully JITed a 16-byte eBPF instruction.
  * <0 - failed to JIT.
  */
-static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
+static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
+		      bool extra_pass)
 {
 	const u8 code = insn->code;
 	const u8 dst = bpf2a64[insn->dst_reg];
@@ -625,12 +626,19 @@ emit_cond_jmp:
 	case BPF_JMP | BPF_CALL:
 	{
 		const u8 r0 = bpf2a64[BPF_REG_0];
-		const u64 func = (u64)__bpf_call_base + imm;
+		bool func_addr_fixed;
+		u64 func_addr;
+		int ret;
 
-		if (ctx->prog->is_func)
+		ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass,
-			emit_addr_mov_i64(tmp, func, ctx);
+					    &func_addr, &func_addr_fixed);
+		if (ret < 0)
+			return ret;
+		if (func_addr_fixed)
+			/* We can use optimized emission here. */
+			emit_a64_mov_i64(tmp, func_addr, ctx);
 		else
-			emit_a64_mov_i64(tmp, func, ctx);
+			emit_addr_mov_i64(tmp, func_addr, ctx);
 		emit(A64_BLR(tmp), ctx);
 		emit(A64_MOV(1, r0, A64_R(0)), ctx);
 		break;
@@ -753,7 +761,7 @@ emit_cond_jmp:
 	return 0;
 }
 
-static int build_body(struct jit_ctx *ctx)
+static int build_body(struct jit_ctx *ctx, bool extra_pass)
 {
 	const struct bpf_prog *prog = ctx->prog;
 	int i;
@@ -762,7 +770,7 @@ static int build_body(struct jit_ctx *ctx)
 		const struct bpf_insn *insn = &prog->insnsi[i];
 		int ret;
 
-		ret = build_insn(insn, ctx);
+		ret = build_insn(insn, ctx, extra_pass);
 		if (ret > 0) {
 			i++;
 			if (ctx->image == NULL)
@@ -858,7 +866,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	/* 1. Initial fake pass to compute ctx->idx. */
 
 	/* Fake pass to fill in ctx->offset. */
-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
@@ -888,7 +896,7 @@ skip_init_ctx:
 
 	build_prologue(&ctx, was_classic);
 
-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		bpf_jit_binary_free(header);
 		prog = orig_prog;
 		goto out_off;

arch/ia64/include/asm/numa.h

@@ -59,7 +59,9 @@ extern struct node_cpuid_s node_cpuid[NR_CPUS];
  */
 
 extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
-#define node_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+#define slit_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+extern int __node_distance(int from, int to);
+#define node_distance(from,to) __node_distance(from, to)
 
 extern int paddr_to_nid(unsigned long paddr);
 

arch/ia64/kernel/acpi.c

@@ -578,8 +578,8 @@ void __init acpi_numa_fixup(void)
 	if (!slit_table) {
 		for (i = 0; i < MAX_NUMNODES; i++)
 			for (j = 0; j < MAX_NUMNODES; j++)
-				node_distance(i, j) = i == j ? LOCAL_DISTANCE :
+				slit_distance(i, j) = i == j ?
-							REMOTE_DISTANCE;
+					LOCAL_DISTANCE : REMOTE_DISTANCE;
 		return;
 	}
 
@@ -592,7 +592,7 @@ void __init acpi_numa_fixup(void)
 			if (!pxm_bit_test(j))
 				continue;
 			node_to = pxm_to_node(j);
-			node_distance(node_from, node_to) =
+			slit_distance(node_from, node_to) =
 			    slit_table->entry[i * slit_table->locality_count + j];
 		}
 	}

arch/ia64/mm/numa.c

@@ -36,6 +36,12 @@ struct node_cpuid_s node_cpuid[NR_CPUS] =
  */
 u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
 
+int __node_distance(int from, int to)
+{
+	return slit_distance(from, to);
+}
+EXPORT_SYMBOL(__node_distance);
+
 /* Identify which cnode a physical address resides on */
 int
 paddr_to_nid(unsigned long paddr)

arch/microblaze/kernel/ftrace.c

@@ -22,8 +22,7 @@
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	int faulted, err;
+	int faulted;
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker = (unsigned long)
 				&return_to_handler;
 
@@ -63,18 +62,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}
 
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
+	if (function_graph_enter(old, self_addr, 0, NULL))
-	if (err == -EBUSY) {
 		*parent = old;
-		return;
-	}
-
-	trace.func = self_addr;
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		*parent = old;
-	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 

arch/mips/configs/cavium_octeon_defconfig

@@ -140,6 +140,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_STAGING=y
 CONFIG_OCTEON_ETHERNET=y
+CONFIG_OCTEON_USB=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_RAS=y
 CONFIG_EXT4_FS=y

arch/mips/include/asm/syscall.h

@@ -73,7 +73,7 @@ static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
 #ifdef CONFIG_64BIT
 	case 4: case 5: case 6: case 7:
 #ifdef CONFIG_MIPS32_O32
-		if (test_thread_flag(TIF_32BIT_REGS))
+		if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
 			return get_user(*arg, (int *)usp + n);
 		else
 #endif

arch/mips/kernel/ftrace.c

@@ -322,7 +322,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 			   unsigned long fp)
 {
 	unsigned long old_parent_ra;
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker = (unsigned long)
 	    &return_to_handler;
 	int faulted, insns;
@@ -369,12 +368,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	if (unlikely(faulted))
 		goto out;
 
-	if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp,
-				     NULL) == -EBUSY) {
-		*parent_ra_addr = old_parent_ra;
-		return;
-	}
-
 	/*
 	 * Get the recorded ip of the current mcount calling site in the
 	 * __mcount_loc section, which will be used to filter the function
@@ -382,13 +375,10 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	 */
 
 	insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
-	trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
+	self_ra -= (MCOUNT_INSN_SIZE * insns);
 
-	/* Only trace if the calling function expects to */
+	if (function_graph_enter(old_parent_ra, self_ra, fp, NULL))
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
 		*parent_ra_addr = old_parent_ra;
-	}
 	return;
 out:
 	ftrace_graph_stop();

arch/mips/kernel/setup.c

@@ -794,6 +794,7 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	/* call board setup routine */
 	plat_mem_setup();
+	memblock_set_bottom_up(true);
 
 	/*
 	 * Make sure all kernel memory is in the maps.  The "UP" and

arch/mips/kernel/traps.c

@@ -2260,10 +2260,8 @@ void __init trap_init(void)
 		unsigned long size = 0x200 + VECTORSPACING*64;
 		phys_addr_t ebase_pa;
 
-		memblock_set_bottom_up(true);
 		ebase = (unsigned long)
 			memblock_alloc_from(size, 1 << fls(size), 0);
-		memblock_set_bottom_up(false);
 
 		/*
 		 * Try to ensure ebase resides in KSeg0 if possible.
@@ -2307,6 +2305,7 @@ void __init trap_init(void)
 	if (board_ebase_setup)
 		board_ebase_setup();
 	per_cpu_trap_init(true);
+	memblock_set_bottom_up(false);
 
 	/*
 	 * Copy the generic exception handlers to their final destination.

arch/mips/loongson64/loongson-3/numa.c

@@ -231,6 +231,8 @@ static __init void prom_meminit(void)
 			cpumask_clear(&__node_data[(node)]->cpumask);
 		}
 	}
+	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
+
 	for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
 		node = cpu / loongson_sysconf.cores_per_node;
 		if (node >= num_online_nodes())
@@ -248,19 +250,9 @@ static __init void prom_meminit(void)
 
 void __init paging_init(void)
 {
-	unsigned node;
 	unsigned long zones_size[MAX_NR_ZONES] = {0, };
 
 	pagetable_init();
-
-	for_each_online_node(node) {
-		unsigned long  start_pfn, end_pfn;
-
-		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
-		if (end_pfn > max_low_pfn)
-			max_low_pfn = end_pfn;
-	}
 #ifdef CONFIG_ZONE_DMA32
 	zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
 #endif

arch/mips/ralink/mt7620.c

@@ -84,7 +84,7 @@ static struct rt2880_pmx_func pcie_rst_grp[] = {
 };
 static struct rt2880_pmx_func nd_sd_grp[] = {
 	FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
-	FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
+	FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
 };
 
 static struct rt2880_pmx_group mt7620a_pinmux_data[] = {

arch/mips/sgi-ip27/ip27-memory.c

@@ -435,6 +435,7 @@ void __init prom_meminit(void)
 
 	mlreset();
 	szmem();
+	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
 
 	for (node = 0; node < MAX_COMPACT_NODES; node++) {
 		if (node_online(node)) {
@@ -455,18 +456,8 @@ extern void setup_zero_pages(void);
 void __init paging_init(void)
 {
 	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-	unsigned node;
 
 	pagetable_init();
-
-	for_each_online_node(node) {
-		unsigned long start_pfn, end_pfn;
-
-		get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
-
-		if (end_pfn > max_low_pfn)
-			max_low_pfn = end_pfn;
-	}
 	zones_size[ZONE_NORMAL] = max_low_pfn;
 	free_area_init_nodes(zones_size);
 }

arch/nds32/kernel/ftrace.c

@@ -211,29 +211,15 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
-	struct ftrace_graph_ent trace;
 	unsigned long old;
-	int err;
 
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
 	old = *parent;
 
-	trace.func = self_addr;
+	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
-	trace.depth = current->curr_ret_stack + 1;
+		*parent = return_hooker;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-
-	if (err == -EBUSY)
-		return;
-
-	*parent = return_hooker;
 }
 
 noinline void ftrace_graph_caller(void)

arch/parisc/include/asm/spinlock.h

@@ -37,8 +37,8 @@ static inline void arch_spin_unlock(arch_spinlock_t *x)
 	volatile unsigned int *a;
 
 	a = __ldcw_align(x);
-	/* Release with ordered store. */
+	mb();
-	__asm__ __volatile__("stw,ma %0,0(%1)" : : "r"(1), "r"(a) : "memory");
+	*a = 1;
 }
 
 static inline int arch_spin_trylock(arch_spinlock_t *x)

arch/parisc/kernel/ftrace.c

@@ -30,7 +30,6 @@ static void __hot prepare_ftrace_return(unsigned long *parent,
 					unsigned long self_addr)
 {
 	unsigned long old;
-	struct ftrace_graph_ent trace;
 	extern int parisc_return_to_handler;
 
 	if (unlikely(ftrace_graph_is_dead()))
@@ -41,19 +40,9 @@ static void __hot prepare_ftrace_return(unsigned long *parent,
 
 	old = *parent;
 
-	trace.func = self_addr;
+	if (!function_graph_enter(old, self_addr, 0, NULL))
-	trace.depth = current->curr_ret_stack + 1;
+		/* activate parisc_return_to_handler() as return point */
-
+		*parent = (unsigned long) &parisc_return_to_handler;
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-        if (ftrace_push_return_trace(old, self_addr, &trace.depth,
-				     0, NULL) == -EBUSY)
-                return;
-
-	/* activate parisc_return_to_handler() as return point */
-	*parent = (unsigned long) &parisc_return_to_handler;
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 

arch/parisc/kernel/syscall.S

@@ -640,7 +640,8 @@ cas_action:
 	sub,<>	%r28, %r25, %r0
 2:	stw	%r24, 0(%r26)
 	/* Free lock */
-	stw,ma	%r20, 0(%sr2,%r20)
+	sync
+	stw	%r20, 0(%sr2,%r20)
 #if ENABLE_LWS_DEBUG
 	/* Clear thread register indicator */
 	stw	%r0, 4(%sr2,%r20)
@@ -654,7 +655,8 @@ cas_action:
 3:		
 	/* Error occurred on load or store */
 	/* Free lock */
-	stw,ma	%r20, 0(%sr2,%r20)
+	sync
+	stw	%r20, 0(%sr2,%r20)
 #if ENABLE_LWS_DEBUG
 	stw	%r0, 4(%sr2,%r20)
 #endif
@@ -855,7 +857,8 @@ cas2_action:
 
 cas2_end:
 	/* Free lock */
-	stw,ma	%r20, 0(%sr2,%r20)
+	sync
+	stw	%r20, 0(%sr2,%r20)
 	/* Enable interrupts */
 	ssm	PSW_SM_I, %r0
 	/* Return to userspace, set no error */
@@ -865,7 +868,8 @@ cas2_end:
 22:
 	/* Error occurred on load or store */
 	/* Free lock */
-	stw,ma	%r20, 0(%sr2,%r20)
+	sync
+	stw	%r20, 0(%sr2,%r20)
 	ssm	PSW_SM_I, %r0
 	ldo	1(%r0),%r28
 	b	lws_exit

arch/powerpc/include/asm/io.h

@@ -268,19 +268,13 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  * their hooks, a bitfield is reserved for use by the platform near the
  * top of MMIO addresses (not PIO, those have to cope the hard way).
  *
- * This bit field is 12 bits and is at the top of the IO virtual
+ * The highest address in the kernel virtual space are:
- * addresses PCI_IO_INDIRECT_TOKEN_MASK.
  *
- * The kernel virtual space is thus:
+ *  d0003fffffffffff	# with Hash MMU
+ *  c00fffffffffffff	# with Radix MMU
  *
- *  0xD000000000000000		: vmalloc
+ * The top 4 bits are reserved as the region ID on hash, leaving us 8 bits
- *  0xD000080000000000		: PCI PHB IO space
+ * that can be used for the field.
- *  0xD000080080000000		: ioremap
- *  0xD0000fffffffffff		: end of ioremap region
- *
- * Since the top 4 bits are reserved as the region ID, we use thus
- * the next 12 bits and keep 4 bits available for the future if the
- * virtual address space is ever to be extended.
  *
  * The direct IO mapping operations will then mask off those bits
  * before doing the actual access, though that only happen when
@@ -292,8 +286,8 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  */
 
 #ifdef CONFIG_PPC_INDIRECT_MMIO
-#define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
+#define PCI_IO_IND_TOKEN_SHIFT	52
-#define PCI_IO_IND_TOKEN_SHIFT	48
+#define PCI_IO_IND_TOKEN_MASK	(0xfful << PCI_IO_IND_TOKEN_SHIFT)
 #define PCI_FIX_ADDR(addr)						\
 	((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
 #define PCI_GET_ADDR_TOKEN(addr)					\

arch/powerpc/include/asm/ppc-opcode.h

@@ -493,6 +493,8 @@
 					__PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b))
 #define PPC_SLBFEE_DOT(t, b)	stringify_in_c(.long PPC_INST_SLBFEE | \
 					__PPC_RT(t) | __PPC_RB(b))
+#define __PPC_SLBFEE_DOT(t, b)	stringify_in_c(.long PPC_INST_SLBFEE |	\
+					       ___PPC_RT(t) | ___PPC_RB(b))
 #define PPC_ICBT(c,a,b)		stringify_in_c(.long PPC_INST_ICBT | \
 				       __PPC_CT(c) | __PPC_RA0(a) | __PPC_RB(b))
 /* PASemi instructions */

arch/powerpc/include/asm/ptrace.h

@@ -54,6 +54,7 @@ struct pt_regs
 
 #ifdef CONFIG_PPC64
 	unsigned long ppr;
+	unsigned long __pad;	/* Maintain 16 byte interrupt stack alignment */
 #endif
 };
 #endif

arch/powerpc/kernel/setup_64.c

@@ -636,6 +636,8 @@ static void *__init alloc_stack(unsigned long limit, int cpu)
 {
 	unsigned long pa;
 
+	BUILD_BUG_ON(STACK_INT_FRAME_SIZE % 16);
+
 	pa = memblock_alloc_base_nid(THREAD_SIZE, THREAD_SIZE, limit,
 					early_cpu_to_node(cpu), MEMBLOCK_NONE);
 	if (!pa) {

arch/powerpc/kernel/trace/ftrace.c

@@ -950,7 +950,6 @@ int ftrace_disable_ftrace_graph_caller(void)
  */
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 {
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker;
 
 	if (unlikely(ftrace_graph_is_dead()))
@@ -961,18 +960,8 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 
 	return_hooker = ppc_function_entry(return_to_handler);
 
-	trace.func = ip;
+	if (!function_graph_enter(parent, ip, 0, NULL))
-	trace.depth = current->curr_ret_stack + 1;
+		parent = return_hooker;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		goto out;
-
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0,
-				     NULL) == -EBUSY)
-		goto out;
-
-	parent = return_hooker;
 out:
 	return parent;
 }