Merge branch 'linus' into tracing/urgent

Conflicts: kernel/trace/trace_kprobe.c Merge reason: resolve the conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 09:16:49 +01:00
parent 16620e0f19 f40542532e
commit cc0104e877
3487 changed files with 369074 additions and 235119 deletions
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -214,7 +214,6 @@ unifdef-y += futex.h
 unifdef-y += fs.h
 unifdef-y += gameport.h
 unifdef-y += generic_serial.h
-unifdef-y += hayesesp.h
 unifdef-y += hdlcdrv.h
 unifdef-y += hdlc.h
 unifdef-y += hdreg.h
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -39,7 +39,7 @@ typedef __u32 DriverVer_type;
 #ifndef CCISS_CMD_H
 // This defines are duplicated in cciss_cmd.h in the driver directory 

-//general boundary defintions
+//general boundary definitions
 #define SENSEINFOBYTES          32//note that this value may vary between host implementations

 //Command Status value
--- a/include/linux/chio.h
+++ b/include/linux/chio.h
@@ -21,7 +21,7 @@
 *    query vendor-specific element types
 *
 *    accessing elements works by specifing type and unit of the element.
- *    for eample, storage elements are addressed with type = CHET_ST and
+ *    for example, storage elements are addressed with type = CHET_ST and
 *    unit = 0 .. cp_nslots-1
 *
 */
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -43,6 +43,8 @@ extern int sched_create_sysfs_power_savings_entries(struct sysdev_class *cls);

 #ifdef CONFIG_HOTPLUG_CPU
 extern void unregister_cpu(struct cpu *cpu);
+extern ssize_t arch_cpu_probe(const char *, size_t);
+extern ssize_t arch_cpu_release(const char *, size_t);
 #endif
 struct notifier_block;

@@ -115,6 +117,19 @@ extern void put_online_cpus(void);
 #define unregister_hotcpu_notifier(nb)	unregister_cpu_notifier(nb)
 int cpu_down(unsigned int cpu);

+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+extern void cpu_hotplug_driver_lock(void);
+extern void cpu_hotplug_driver_unlock(void);
+#else
+static inline void cpu_hotplug_driver_lock(void)
+{
+}
+
+static inline void cpu_hotplug_driver_unlock(void)
+{
+}
+#endif
+
 #else		/* CONFIG_HOTPLUG_CPU */

 #define get_online_cpus()	do { } while (0)
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -232,6 +232,7 @@ struct cpufreq_driver {
 	/* optional */
 	unsigned int (*getavg)	(struct cpufreq_policy *policy,
 				 unsigned int cpu);
+	int	(*bios_limit)	(int cpu, unsigned int *limit);

 	int	(*exit)		(struct cpufreq_policy *policy);
 	int	(*suspend)	(struct cpufreq_policy *policy, pm_message_t pmsg);
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -84,6 +84,7 @@ extern const struct cpumask *const cpu_active_mask;
 #define num_online_cpus()	cpumask_weight(cpu_online_mask)
 #define num_possible_cpus()	cpumask_weight(cpu_possible_mask)
 #define num_present_cpus()	cpumask_weight(cpu_present_mask)
+#define num_active_cpus()	cpumask_weight(cpu_active_mask)
 #define cpu_online(cpu)		cpumask_test_cpu((cpu), cpu_online_mask)
 #define cpu_possible(cpu)	cpumask_test_cpu((cpu), cpu_possible_mask)
 #define cpu_present(cpu)	cpumask_test_cpu((cpu), cpu_present_mask)
@@ -92,6 +93,7 @@ extern const struct cpumask *const cpu_active_mask;
 #define num_online_cpus()	1
 #define num_possible_cpus()	1
 #define num_present_cpus()	1
+#define num_active_cpus()	1
 #define cpu_online(cpu)		((cpu) == 0)
 #define cpu_possible(cpu)	((cpu) == 0)
 #define cpu_present(cpu)	((cpu) == 0)
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -558,7 +558,7 @@ extern void wait_for_device_probe(void);
 #ifdef CONFIG_DEVTMPFS
 extern int devtmpfs_create_node(struct device *dev);
 extern int devtmpfs_delete_node(struct device *dev);
-extern int devtmpfs_mount(const char *mountpoint);
+extern int devtmpfs_mount(const char *mntdir);
 #else
 static inline int devtmpfs_create_node(struct device *dev) { return 0; }
 static inline int devtmpfs_delete_node(struct device *dev) { return 0; }
--- a/include/linux/dm-log-userspace.h
+++ b/include/linux/dm-log-userspace.h
@@ -363,7 +363,7 @@
 * various request types above.  The remaining 24-bits are currently
 * set to zero and are reserved for future use and compatibility concerns.
 *
- * User-space should always use DM_ULOG_REQUEST_TYPE to aquire the
+ * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the
 * request type from the 'request_type' field to maintain forward compatibility.
 */
 #define DM_ULOG_REQUEST_MASK 0xFF
--- a/include/linux/ext2_fs.h
+++ b/include/linux/ext2_fs.h
@@ -565,14 +565,14 @@ struct ext2_dir_entry_2 {
 * other bits are reserved for now.
 */
 enum {
-	EXT2_FT_UNKNOWN,
-	EXT2_FT_REG_FILE,
-	EXT2_FT_DIR,
-	EXT2_FT_CHRDEV,
-	EXT2_FT_BLKDEV,
-	EXT2_FT_FIFO,
-	EXT2_FT_SOCK,
-	EXT2_FT_SYMLINK,
+	EXT2_FT_UNKNOWN		= 0,
+	EXT2_FT_REG_FILE	= 1,
+	EXT2_FT_DIR		= 2,
+	EXT2_FT_CHRDEV		= 3,
+	EXT2_FT_BLKDEV		= 4,
+	EXT2_FT_FIFO		= 5,
+	EXT2_FT_SOCK		= 6,
+	EXT2_FT_SYMLINK		= 7,
 	EXT2_FT_MAX
 };

--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -918,6 +918,8 @@ extern void ext3_abort (struct super_block *, const char *, const char *, ...)
 	__attribute__ ((format (printf, 3, 4)));
 extern void ext3_warning (struct super_block *, const char *, const char *, ...)
 	__attribute__ ((format (printf, 3, 4)));
+extern void ext3_msg(struct super_block *, const char *, const char *, ...)
+	__attribute__ ((format (printf, 3, 4)));
 extern void ext3_update_dynamic_rev (struct super_block *sb);

 #define ext3_std_error(sb, errno)				\
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -763,6 +763,7 @@ struct fb_tile_ops {
 	 *  takes over; acceleration engine should be in a quiescent state */

 /* hints */
+#define FBINFO_VIRTFB		0x0004 /* FB is System RAM, not device. */
 #define FBINFO_PARTIAL_PAN_OK	0x0040 /* otw use pan only for double-buffering */
 #define FBINFO_READS_FAST	0x0080 /* soft-copy faster than rendering */

--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -4,6 +4,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/compiler.h>
+#include <linux/gfp.h>

 #define FW_ACTION_NOHOTPLUG 0
 #define FW_ACTION_HOTPLUG 1
@@ -38,7 +39,7 @@ int request_firmware(const struct firmware **fw, const char *name,
 		     struct device *device);
 int request_firmware_nowait(
 	struct module *module, int uevent,
-	const char *name, struct device *device, void *context,
+	const char *name, struct device *device, gfp_t gfp, void *context,
 	void (*cont)(const struct firmware *fw, void *context));

 void release_firmware(const struct firmware *fw);
@@ -51,7 +52,7 @@ static inline int request_firmware(const struct firmware **fw,
 }
 static inline int request_firmware_nowait(
 	struct module *module, int uevent,
-	const char *name, struct device *device, void *context,
+	const char *name, struct device *device, gfp_t gfp, void *context,
 	void (*cont)(const struct firmware *fw, void *context))
 {
 	return -EINVAL;
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2091,8 +2091,6 @@ extern int filemap_fdatawait_range(struct address_space *, loff_t lstart,
 extern int filemap_write_and_wait(struct address_space *mapping);
 extern int filemap_write_and_wait_range(struct address_space *mapping,
 				        loff_t lstart, loff_t lend);
-extern int wait_on_page_writeback_range(struct address_space *mapping,
-				pgoff_t start, pgoff_t end);
 extern int __filemap_fdatawrite_range(struct address_space *mapping,
 				loff_t start, loff_t end, int sync_mode);
 extern int filemap_fdatawrite_range(struct address_space *mapping,
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -74,7 +74,12 @@ struct spi_device;
 struct fsl_spi_platform_data {
 	u32 	initial_spmode;	/* initial SPMODE value */
 	s16	bus_num;
-	bool	qe_mode;
+	unsigned int flags;
+#define SPI_QE_CPU_MODE		(1 << 0) /* QE CPU ("PIO") mode */
+#define SPI_CPM_MODE		(1 << 1) /* CPM/QE ("DMA") mode */
+#define SPI_CPM1		(1 << 2) /* SPI unit is in CPM1 block */
+#define SPI_CPM2		(1 << 3) /* SPI unit is in CPM2 block */
+#define SPI_QE			(1 << 4) /* SPI unit is in QE block */
 	/* board specific information */
 	u16	max_chipselect;
 	void	(*cs_control)(struct spi_device *spi, bool on);
@@ -90,6 +95,10 @@ struct mpc8xx_pcmcia_ops {
 * lead to a deep sleep (i.e. power removed from the core,
 * instead of just the clock).
 */
+#if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
 int fsl_deep_sleep(void);
+#else
+static inline int fsl_deep_sleep(void) { return 0; }
+#endif

 #endif /* _FSL_DEVICE_H_ */
--- a/include/linux/gigaset_dev.h
+++ b/include/linux/gigaset_dev.h
@@ -16,15 +16,23 @@

 #include <linux/ioctl.h>

+/* The magic IOCTL value for this interface. */
 #define GIGASET_IOCTL 0x47

-#define GIGVER_DRIVER 0
-#define GIGVER_COMPAT 1
-#define GIGVER_FWBASE 2
+/* enable/disable device control via character device (lock out ISDN subsys) */
+#define GIGASET_REDIR    _IOWR(GIGASET_IOCTL, 0, int)

-#define GIGASET_REDIR    _IOWR (GIGASET_IOCTL, 0, int)
-#define GIGASET_CONFIG   _IOWR (GIGASET_IOCTL, 1, int)
-#define GIGASET_BRKCHARS _IOW  (GIGASET_IOCTL, 2, unsigned char[6]) //FIXME [6] okay?
-#define GIGASET_VERSION  _IOWR (GIGASET_IOCTL, 3, unsigned[4])
+/* enable adapter configuration mode (M10x only) */
+#define GIGASET_CONFIG   _IOWR(GIGASET_IOCTL, 1, int)
+
+/* set break characters (M105 only) */
+#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
+
+/* get version information selected by arg[0] */
+#define GIGASET_VERSION  _IOWR(GIGASET_IOCTL, 3, unsigned[4])
+/* values for GIGASET_VERSION arg[0] */
+#define GIGVER_DRIVER 0		/* get driver version */
+#define GIGVER_COMPAT 1		/* get interface compatibility version */
+#define GIGVER_FWBASE 2		/* get base station firmware version */

 #endif
--- a/include/linux/hayesesp.h
+++ b/include/linux/hayesesp.h
@@ -1,114 +0,0 @@
-#ifndef HAYESESP_H
-#define HAYESESP_H
-
-struct hayes_esp_config {
-	short flow_on;
-	short flow_off;
-	short rx_trigger;
-	short tx_trigger;
-	short pio_threshold;
-	unsigned char rx_timeout;
-	char dma_channel;
-};
-
-#ifdef __KERNEL__
-
-#define ESP_DMA_CHANNEL   0
-#define ESP_RX_TRIGGER    768
-#define ESP_TX_TRIGGER    768
-#define ESP_FLOW_OFF      1016
-#define ESP_FLOW_ON       944
-#define ESP_RX_TMOUT      128
-#define ESP_PIO_THRESHOLD 32
-
-#define ESP_IN_MAJOR	57	/* major dev # for dial in */
-#define ESP_OUT_MAJOR	58	/* major dev # for dial out */
-#define ESPC_SCALE 	3
-#define UART_ESI_BASE	0x00
-#define UART_ESI_SID	0x01
-#define UART_ESI_RX	0x02
-#define UART_ESI_TX	0x02
-#define UART_ESI_CMD1	0x04
-#define UART_ESI_CMD2	0x05
-#define UART_ESI_STAT1	0x04
-#define UART_ESI_STAT2	0x05
-#define UART_ESI_RWS	0x07
-
-#define UART_IER_DMA_TMOUT	0x80
-#define UART_IER_DMA_TC		0x08
-
-#define ESI_SET_IRQ		0x04
-#define ESI_SET_DMA_TMOUT	0x05
-#define ESI_SET_SRV_MASK	0x06
-#define ESI_SET_ERR_MASK	0x07
-#define ESI_SET_FLOW_CNTL	0x08
-#define ESI_SET_FLOW_CHARS	0x09
-#define ESI_SET_FLOW_LVL	0x0a
-#define ESI_SET_TRIGGER		0x0b
-#define ESI_SET_RX_TIMEOUT	0x0c
-#define ESI_SET_FLOW_TMOUT	0x0d
-#define ESI_WRITE_UART		0x0e
-#define ESI_READ_UART		0x0f
-#define ESI_SET_MODE		0x10
-#define ESI_GET_ERR_STAT	0x12
-#define ESI_GET_UART_STAT	0x13
-#define ESI_GET_RX_AVAIL	0x14
-#define ESI_GET_TX_AVAIL	0x15
-#define ESI_START_DMA_RX	0x16
-#define ESI_START_DMA_TX	0x17
-#define ESI_ISSUE_BREAK		0x1a
-#define ESI_FLUSH_RX		0x1b
-#define ESI_FLUSH_TX		0x1c
-#define ESI_SET_BAUD		0x1d
-#define ESI_SET_ENH_IRQ		0x1f
-#define ESI_SET_REINTR		0x20
-#define ESI_SET_PRESCALAR	0x23
-#define ESI_NO_COMMAND		0xff
-
-#define ESP_STAT_RX_TIMEOUT	0x01
-#define ESP_STAT_DMA_RX		0x02
-#define ESP_STAT_DMA_TX		0x04
-#define ESP_STAT_NEVER_DMA      0x08
-#define ESP_STAT_USE_PIO        0x10
-
-#define ESP_MAGIC		0x53ee
-#define ESP_XMIT_SIZE		4096
-
-struct esp_struct {
-	int			magic;
-	struct tty_port		port;
-	spinlock_t		lock;
-	int			io_port;
-	int			irq;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			stat_flags;
-	int			custom_divisor;
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	int			IER; 	/* Interrupt Enable Register */
-	int			MCR; 	/* Modem control register */
-	unsigned long		last_active;
-	int			line;
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	wait_queue_head_t	break_wait;
-	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
-	struct hayes_esp_config config; /* port configuration */
-	struct esp_struct	*next_port; /* For the linked list */
-};
-
-struct esp_pio_buffer {
-	unsigned char data[1024];
-	struct esp_pio_buffer *next;
-};
-
-#endif /* __KERNEL__ */
-
-
-#endif /* ESP_H */
-
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -312,6 +312,7 @@ struct hid_item {
 #define HID_QUIRK_MULTI_INPUT			0x00000040
 #define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
 #define HID_QUIRK_FULLSPEED_INTERVAL		0x10000000
+#define HID_QUIRK_NO_INIT_REPORTS		0x20000000

 /*
 * This is the global environment of the parser. This information is
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -162,10 +162,11 @@ struct hrtimer_clock_base {
 * @expires_next:	absolute time of the next event which was scheduled
 *			via clock_set_next_event()
 * @hres_active:	State of high resolution mode
- * @check_clocks:	Indictator, when set evaluate time source and clock
- *			event devices whether high resolution mode can be
- *			activated.
- * @nr_events:		Total number of timer interrupt events
+ * @hang_detected:	The last hrtimer interrupt detected a hang
+ * @nr_events:		Total number of hrtimer interrupt events
+ * @nr_retries:		Total number of hrtimer interrupt retries
+ * @nr_hangs:		Total number of hrtimer interrupt hangs
+ * @max_hang_time:	Maximum time spent in hrtimer_interrupt
 */
 struct hrtimer_cpu_base {
 	spinlock_t			lock;
@@ -173,7 +174,11 @@ struct hrtimer_cpu_base {
 #ifdef CONFIG_HIGH_RES_TIMERS
 	ktime_t				expires_next;
 	int				hres_active;
+	int				hang_detected;
 	unsigned long			nr_events;
+	unsigned long			nr_retries;
+	unsigned long			nr_hangs;
+	ktime_t				max_hang_time;
 #endif
 };

@@ -435,47 +440,4 @@ extern u64 ktime_divns(const ktime_t kt, s64 div);
 /* Show pending timers: */
 extern void sysrq_timer_list_show(void);

-/*
- * Timer-statistics info:
- */
-#ifdef CONFIG_TIMER_STATS
-
-extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
-				     void *timerf, char *comm,
-				     unsigned int timer_flag);
-
-static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
-{
-	if (likely(!timer_stats_active))
-		return;
-	timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
-				 timer->function, timer->start_comm, 0);
-}
-
-extern void __timer_stats_hrtimer_set_start_info(struct hrtimer *timer,
-						 void *addr);
-
-static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
-{
-	__timer_stats_hrtimer_set_start_info(timer, __builtin_return_address(0));
-}
-
-static inline void timer_stats_hrtimer_clear_start_info(struct hrtimer *timer)
-{
-	timer->start_site = NULL;
-}
-#else
-static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
-{
-}
-
-static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
-{
-}
-
-static inline void timer_stats_hrtimer_clear_start_info(struct hrtimer *timer)
-{
-}
-#endif
-
 #endif
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -20,19 +20,18 @@ enum {

 #ifdef CONFIG_HAVE_HW_BREAKPOINT

-/* As it's for in-kernel or ptrace use, we want it to be pinned */
-#define DEFINE_BREAKPOINT_ATTR(name)	\
-struct perf_event_attr name = {		\
-	.type = PERF_TYPE_BREAKPOINT,	\
-	.size = sizeof(name),		\
-	.pinned = 1,			\
-};
-
 static inline void hw_breakpoint_init(struct perf_event_attr *attr)
 {
+	memset(attr, 0, sizeof(*attr));
+
 	attr->type = PERF_TYPE_BREAKPOINT;
 	attr->size = sizeof(*attr);
+	/*
+	 * As it's for in-kernel or ptrace use, we want it to be pinned
+	 * and to call its callback every hits.
+	 */
 	attr->pinned = 1;
+	attr->sample_period = 1;
 }

 static inline unsigned long hw_breakpoint_addr(struct perf_event *bp)
@@ -52,27 +51,24 @@ static inline int hw_breakpoint_len(struct perf_event *bp)

 extern struct perf_event *
 register_user_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_callback_t triggered,
+			    perf_overflow_handler_t triggered,
 			    struct task_struct *tsk);

 /* FIXME: only change from the attr, and don't unregister */
-extern struct perf_event *
-modify_user_hw_breakpoint(struct perf_event *bp,
-			  struct perf_event_attr *attr,
-			  perf_callback_t triggered,
-			  struct task_struct *tsk);
+extern int
+modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr);

 /*
 * Kernel breakpoints are not associated with any particular thread.
 */
 extern struct perf_event *
 register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
-				perf_callback_t triggered,
+				perf_overflow_handler_t	triggered,
 				int cpu);

 extern struct perf_event **
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_callback_t triggered);
+			    perf_overflow_handler_t triggered);

 extern int register_perf_hw_breakpoint(struct perf_event *bp);
 extern int __register_perf_hw_breakpoint(struct perf_event *bp);
@@ -93,20 +89,18 @@ static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)

 static inline struct perf_event *
 register_user_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_callback_t triggered,
+			    perf_overflow_handler_t triggered,
 			    struct task_struct *tsk)	{ return NULL; }
-static inline struct perf_event *
+static inline int
 modify_user_hw_breakpoint(struct perf_event *bp,
-			  struct perf_event_attr *attr,
-			  perf_callback_t triggered,
-			  struct task_struct *tsk)	{ return NULL; }
+			  struct perf_event_attr *attr)	{ return NULL; }
 static inline struct perf_event *
 register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
-				perf_callback_t triggered,
+				perf_overflow_handler_t	 triggered,
 				int cpu)		{ return NULL; }
 static inline struct perf_event **
 register_wide_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_callback_t triggered)	{ return NULL; }
+			    perf_overflow_handler_t triggered)	{ return NULL; }
 static inline int
 register_perf_hw_breakpoint(struct perf_event *bp)	{ return -ENOSYS; }
 static inline int
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -125,8 +125,8 @@ struct ide_io_ports {
 * Timeouts for various operations:
 */
 enum {
-	/* spec allows up to 20ms */
-	WAIT_DRQ	= HZ / 10,	/* 100ms */
+	/* spec allows up to 20ms, but CF cards and SSD drives need more */
+	WAIT_DRQ	= 1 * HZ,	/* 1s */
 	/* some laptops are very slow */
 	WAIT_READY	= 5 * HZ,	/* 5s */
 	/* should be less than 3ms (?), if all ATAPI CD is closed at boot */
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -137,8 +137,6 @@ extern struct ctl_table ether_table[];
 extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);

 #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
-#define MAC_BUF_SIZE	18
-#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE]

 #endif

--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -110,7 +110,7 @@ struct in6_flowlabel_req {
 #define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
 #define IPV6_FLOWINFO_PRIORITY		0x0ff00000

-/* These defintions are obsolete */
+/* These definitions are obsolete */
 #define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
 #define IPV6_PRIORITY_FILLER		0x0100
 #define IPV6_PRIORITY_UNATTENDED	0x0200
--- a/include/linux/input-polldev.h
+++ b/include/linux/input-polldev.h
@@ -14,12 +14,19 @@

 /**
 * struct input_polled_dev - simple polled input device
- * @private: private driver data
- * @flush: driver-supplied method that flushes device's state upon
- *	opening (optional)
+ * @private: private driver data.
+ * @open: driver-supplied method that prepares device for polling
+ *	(enabled the device and maybe flushes device state).
+ * @close: driver-supplied method that is called when device is no
+ *	longer being polled. Used to put device into low power mode.
 * @poll: driver-supplied method that polls the device and posts
 *	input events (mandatory).
- * @poll_interval: specifies how often the poll() method shoudl be called.
+ * @poll_interval: specifies how often the poll() method should be called.
+ *	Defaults to 500 msec unless overriden when registering the device.
+ * @poll_interval_max: specifies upper bound for the poll interval.
+ *	Defaults to the initial value of @poll_interval.
+ * @poll_interval_min: specifies lower bound for the poll interval.
+ *	Defaults to 0.
 * @input: input device structire associated with the polled device.
 *	Must be properly initialized by the driver (id, name, phys, bits).
 *
@@ -30,11 +37,16 @@
 struct input_polled_dev {
 	void *private;

-	void (*flush)(struct input_polled_dev *dev);
+	void (*open)(struct input_polled_dev *dev);
+	void (*close)(struct input_polled_dev *dev);
 	void (*poll)(struct input_polled_dev *dev);
 	unsigned int poll_interval; /* msec */
+	unsigned int poll_interval_max; /* msec */
+	unsigned int poll_interval_min; /* msec */

 	struct input_dev *input;
+
+/* private: */
 	struct delayed_work work;
 };

--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -895,7 +895,7 @@ struct ff_periodic_effect {
 	struct ff_envelope envelope;

 	__u32 custom_len;
-	__s16 *custom_data;
+	__s16 __user *custom_data;
 };

 /**
@@ -1021,9 +1021,12 @@ struct ff_effect {
 * @keycodesize: size of elements in keycode table
 * @keycode: map of scancodes to keycodes for this device
 * @setkeycode: optional method to alter current keymap, used to implement
- *	sparse keymaps. If not supplied default mechanism will be used
+ *	sparse keymaps. If not supplied default mechanism will be used.
+ *	The method is being called while holding event_lock and thus must
+ *	not sleep
 * @getkeycode: optional method to retrieve current keymap. If not supplied
- *	default mechanism will be used
+ *	default mechanism will be used. The method is being called while
+ *	holding event_lock and thus must not sleep
 * @ff: force feedback structure associated with the device if device
 *	supports force feedback effects
 * @repeat_key: stores key code of the last key pressed; used to implement
@@ -1040,6 +1043,7 @@ struct ff_effect {
 * @absmin: minimum values for events coming from absolute axes
 * @absfuzz: describes noisiness for axes
 * @absflat: size of the center flat position (used by joydev)
+ * @absres: resolution used for events coming form absolute axes
 * @open: this method is called when the very first user calls
 *	input_open_device(). The driver must prepare the device
 *	to start generating events (start polling thread,
@@ -1294,6 +1298,9 @@ void input_unregister_device(struct input_dev *);
 int __must_check input_register_handler(struct input_handler *);
 void input_unregister_handler(struct input_handler *);

+int input_handler_for_each_handle(struct input_handler *, void *data,
+				  int (*fn)(struct input_handle *, void *));
+
 int input_register_handle(struct input_handle *);
 void input_unregister_handle(struct input_handle *);

--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -41,6 +41,9 @@ struct matrix_keymap_data {
 * @col_scan_delay_us: delay, measured in microseconds, that is
 *	needed before we can keypad after activating column gpio
 * @debounce_ms: debounce interval in milliseconds
+ * @active_low: gpio polarity
+ * @wakeup: controls whether the device should be set up as wakeup
+ *	source
 *
 * This structure represents platform-specific data that use used by
 * matrix_keypad driver to perform proper initialization.
--- a/include/linux/input/sh_keysc.h
+++ b/include/linux/input/sh_keysc.h
@@ -0,0 +1,14 @@
+#ifndef __SH_KEYSC_H__
+#define __SH_KEYSC_H__
+
+#define SH_KEYSC_MAXKEYS 30
+
+struct sh_keysc_info {
+	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
+	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
+	int delay;
+	int kycr2_delay;
+	int keycodes[SH_KEYSC_MAXKEYS];
+};
+
+#endif /* __SH_KEYSC_H__ */
--- a/include/linux/input/sparse-keymap.h
+++ b/include/linux/input/sparse-keymap.h
@@ -0,0 +1,62 @@
+#ifndef _SPARSE_KEYMAP_H
+#define _SPARSE_KEYMAP_H
+
+/*
+ * Copyright (c) 2009 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#define KE_END		0	/* Indicates end of keymap */
+#define KE_KEY		1	/* Ordinary key/button */
+#define KE_SW		2	/* Switch (predetermined value) */
+#define KE_VSW		3	/* Switch (value supplied at runtime) */
+#define KE_IGNORE	4	/* Known entry that should be ignored */
+#define KE_LAST		KE_IGNORE
+
+/**
+ * struct key_entry - keymap entry for use in sparse keymap
+ * @type: Type of the key entry (KE_KEY, KE_SW, KE_VSW, KE_END);
+ *	drivers are allowed to extend the list with their own
+ *	private definitions.
+ * @code: Device-specific data identifying the button/switch
+ * @keycode: KEY_* code assigned to a key/button
+ * @sw.code: SW_* code assigned to a switch
+ * @sw.value: Value that should be sent in an input even when KE_SW
+ *	switch is toggled. KE_VSW switches ignore this field and
+ *	expect driver to supply value for the event.
+ *
+ * This structure defines an entry in a sparse keymap used by some
+ * input devices for which traditional table-based approach is not
+ * suitable.
+ */
+struct key_entry {
+	int type;		/* See KE_* above */
+	u32 code;
+	union {
+		u16 keycode;		/* For KE_KEY */
+		struct {		/* For KE_SW, KE_VSW */
+			u8 code;
+			u8 value;	/* For KE_SW, ignored by KE_VSW */
+		} sw;
+	};
+};
+
+struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev,
+						    unsigned int code);
+struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
+						   unsigned int code);
+int sparse_keymap_setup(struct input_dev *dev,
+			const struct key_entry *keymap,
+			int (*setup)(struct input_dev *, struct key_entry *));
+void sparse_keymap_free(struct input_dev *dev);
+
+void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
+				unsigned int value, bool autorelease);
+
+bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
+				unsigned int value, bool autorelease);
+
+#endif /* _SPARSE_KEYMAP_H */
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -282,7 +282,7 @@ extern irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action);

 /*
 * Built-in IRQ handlers for various IRQ types,
- * callable via desc->chip->handle_irq()
+ * callable via desc->handle_irq()
 */
 extern void handle_level_irq(unsigned int irq, struct irq_desc *desc);
 extern void handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc);
--- a/include/linux/isicom.h
+++ b/include/linux/isicom.h
@@ -67,6 +67,7 @@

 #define		FIRMWARE_LOADED		0x0001
 #define		BOARD_ACTIVE		0x0002
+#define		BOARD_INIT		0x0004

 	/* isi_port status bitmap  */

--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -496,6 +496,7 @@ struct kvm_ioeventfd {
 #define KVM_CAP_VCPU_EVENTS 41
 #endif
 #define KVM_CAP_S390_PSW 42
+#define KVM_CAP_PPC_SEGSTATE 43

 #ifdef KVM_CAP_IRQ_ROUTING

--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1024,7 +1024,7 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
 extern int ata_scsi_slave_config(struct scsi_device *sdev);
 extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
-				       int queue_depth);
+				       int queue_depth, int reason);
 extern struct ata_device *ata_dev_pair(struct ata_device *adev);
 extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);

--- a/include/linux/mfd/ezx-pcap.h
+++ b/include/linux/mfd/ezx-pcap.h
@@ -45,7 +45,7 @@ void pcap_set_ts_bits(struct pcap_chip *, u32);
 #define PCAP_CLEAR_INTERRUPT_REGISTER	0x01ffffff
 #define PCAP_MASK_ALL_INTERRUPT		0x01ffffff

-/* registers acessible by both pcap ports */
+/* registers accessible by both pcap ports */
 #define PCAP_REG_ISR		0x0	/* Interrupt Status */
 #define PCAP_REG_MSR		0x1	/* Interrupt Mask */
 #define PCAP_REG_PSTAT		0x2	/* Processor Status */
@@ -67,7 +67,7 @@ void pcap_set_ts_bits(struct pcap_chip *, u32);
 #define PCAP_REG_VENDOR_TEST1	0x1e
 #define PCAP_REG_VENDOR_TEST2	0x1f

-/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
+/* registers accessible by pcap port 1 only (a1200, e2 & e6) */
 #define PCAP_REG_INT_SEL	0x3	/* Interrupt Select */
 #define PCAP_REG_SWCTRL		0x4	/* Switching Regulator Control */
 #define PCAP_REG_VREG1		0x5	/* Regulator Bank 1 Control */
--- a/include/linux/mfd/sh_mobile_sdhi.h
+++ b/include/linux/mfd/sh_mobile_sdhi.h
@@ -0,0 +1,8 @@
+#ifndef __SH_MOBILE_SDHI_H__
+#define __SH_MOBILE_SDHI_H__
+
+struct sh_mobile_sdhi_info {
+	void (*set_pwr)(struct platform_device *pdev, int state);
+};
+
+#endif /* __SH_MOBILE_SDHI_H__ */
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -174,6 +174,8 @@ void ubi_get_volume_info(struct ubi_volume_desc *desc,
 struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
 struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
 					   int mode);
+struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode);
+
 int ubi_register_volume_notifier(struct notifier_block *nb,
 				 int ignore_existing);
 int ubi_unregister_volume_notifier(struct notifier_block *nb);
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -76,7 +76,6 @@ extern struct file *nameidata_to_filp(struct nameidata *nd, int flags);
 extern void release_open_intent(struct nameidata *);

 extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
-extern struct dentry *lookup_one_noperm(const char *, struct dentry *);

 extern int follow_down(struct path *);
 extern int follow_up(struct path *);
--- a/include/linux/nilfs2_fs.h
+++ b/include/linux/nilfs2_fs.h
@@ -151,6 +151,8 @@ struct nilfs_super_root {
 #define NILFS_MOUNT_BARRIER		0x1000  /* Use block barriers */
 #define NILFS_MOUNT_STRICT_ORDER	0x2000  /* Apply strict in-order
 						   semantics also for data */
+#define NILFS_MOUNT_NORECOVERY		0x4000  /* Disable write access during
+						   mount-time recovery */


 /**
@@ -402,6 +404,28 @@ struct nilfs_segment_summary {
 #define NILFS_SS_SYNDT  0x0008  /* includes data only updates */
 #define NILFS_SS_GC     0x0010  /* segment written for cleaner operation */

+/**
+ * struct nilfs_btree_node - B-tree node
+ * @bn_flags: flags
+ * @bn_level: level
+ * @bn_nchildren: number of children
+ * @bn_pad: padding
+ */
+struct nilfs_btree_node {
+	__u8 bn_flags;
+	__u8 bn_level;
+	__le16 bn_nchildren;
+	__le32 bn_pad;
+};
+
+/* flags */
+#define NILFS_BTREE_NODE_ROOT   0x01
+
+/* level */
+#define NILFS_BTREE_LEVEL_DATA          0
+#define NILFS_BTREE_LEVEL_NODE_MIN      (NILFS_BTREE_LEVEL_DATA + 1)
+#define NILFS_BTREE_LEVEL_MAX           14
+
 /**
 * struct nilfs_palloc_group_desc - block group descriptor
 * @pg_nfrees: number of free entries in block group
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -0,0 +1,251 @@
+/*
+ * File: include/linux/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __LINUX_OMAPFB_H__
+#define __LINUX_OMAPFB_H__
+
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
+#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
+#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
+#define OMAPFB_WAITFORGO	OMAP_IO(60)
+#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
+#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+
+	OMAPFB_COLOR_ARGB16,
+	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
+	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
+	OMAPFB_COLOR_ARGB32,
+	OMAPFB_COLOR_RGBA32,
+	OMAPFB_COLOR_RGBX32,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  reserved1;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+struct omapfb_memory_read {
+	__u16 x;
+	__u16 y;
+	__u16 w;
+	__u16 h;
+	size_t buffer_size;
+	void __user *buffer;
+};
+
+struct omapfb_ovl_colormode {
+	__u8 overlay_idx;
+	__u8 mode_idx;
+	__u32 bits_per_pixel;
+	__u32 nonstd;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+struct omapfb_vram_info {
+	__u32 total;
+	__u32 free;
+	__u32 largest_free_block;
+	__u32 reserved[5];
+};
+
+struct omapfb_tearsync_info {
+	__u8 enabled;
+	__u8 reserved1[3];
+	__u16 line;
+	__u16 reserved2;
+};
+
+#ifdef __KERNEL__
+
+#include <plat/board.h>
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_mem_region {
+	u32		paddr;
+	void __iomem	*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	enum omapfb_color_format format;/* OMAPFB_COLOR_* */
+	unsigned	format_used:1;	/* Must be set when format is set.
+					 * Needed b/c of the badly chosen 0
+					 * base for OMAPFB_COLOR_* values
+					 */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+	struct omap_lcd_config		lcd;
+	struct omapfb_mem_desc		mem_desc;
+	void				*ctrl_platform_data;
+};
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+extern void omapfb_reserve_sdram(void);
+
+#endif
+
+#endif /* __OMAPFB_H */
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -218,6 +218,7 @@ struct pci_dev {
 	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
 	u8		revision;	/* PCI revision, low byte of class word */
 	u8		hdr_type;	/* PCI header type (`multi' flag masked out) */
+	u8		pcie_cap;	/* PCI-E capability offset */
 	u8		pcie_type;	/* PCI-E device/port type */
 	u8		rom_base_reg;	/* which config register controls the ROM */
 	u8		pin;  		/* which interrupt pin this device uses */
@@ -280,6 +281,7 @@ struct pci_dev {
 	unsigned int	is_virtfn:1;
 	unsigned int	reset_fn:1;
 	unsigned int    is_hotplug_bridge:1;
+	unsigned int    aer_firmware_first:1;
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */

@@ -635,7 +637,13 @@ struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
 				unsigned int ss_vendor, unsigned int ss_device,
 				struct pci_dev *from);
 struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
-struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn);
+struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus,
+					    unsigned int devfn);
+static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
+						   unsigned int devfn)
+{
+	return pci_get_domain_bus_and_slot(0, bus, devfn);
+}
 struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
 int pci_dev_present(const struct pci_device_id *ids);

@@ -701,6 +709,7 @@ void pci_disable_device(struct pci_dev *dev);
 void pci_set_master(struct pci_dev *dev);
 void pci_clear_master(struct pci_dev *dev);
 int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
+int pci_set_cacheline_size(struct pci_dev *dev);
 #define HAVE_PCI_SET_MWI
 int __must_check pci_set_mwi(struct pci_dev *dev);
 int pci_try_set_mwi(struct pci_dev *dev);
@@ -1246,6 +1255,8 @@ extern int pci_pci_problems;

 extern unsigned long pci_cardbus_io_size;
 extern unsigned long pci_cardbus_mem_size;
+extern u8 pci_dfl_cache_line_size;
+extern u8 pci_cache_line_size;

 extern unsigned long pci_hotplug_io_size;
 extern unsigned long pci_hotplug_mem_size;
@@ -1290,5 +1301,34 @@ extern void pci_hp_create_module_link(struct pci_slot *pci_slot);
 extern void pci_hp_remove_module_link(struct pci_slot *pci_slot);
 #endif

+/**
+ * pci_pcie_cap - get the saved PCIe capability offset
+ * @dev: PCI device
+ *
+ * PCIe capability offset is calculated at PCI device initialization
+ * time and saved in the data structure. This function returns saved
+ * PCIe capability offset. Using this instead of pci_find_capability()
+ * reduces unnecessary search in the PCI configuration space. If you
+ * need to calculate PCIe capability offset from raw device for some
+ * reasons, please use pci_find_capability() instead.
+ */
+static inline int pci_pcie_cap(struct pci_dev *dev)
+{
+	return dev->pcie_cap;
+}
+
+/**
+ * pci_is_pcie - check if the PCI device is PCI Express capable
+ * @dev: PCI device
+ *
+ * Retrun true if the PCI device is PCI Express capable, false otherwise.
+ */
+static inline bool pci_is_pcie(struct pci_dev *dev)
+{
+	return !!pci_pcie_cap(dev);
+}
+
+void pci_request_acs(void);
+
 #endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1587,6 +1587,8 @@
 #define PCI_VENDOR_ID_COMPEX		0x11f6
 #define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112

+#define PCI_VENDOR_ID_PMC_Sierra	0x11f8
+
 #define PCI_VENDOR_ID_RP		0x11fe
 #define PCI_DEVICE_ID_RP32INTF		0x0001
 #define PCI_DEVICE_ID_RP8INTF		0x0002
@@ -2293,6 +2295,20 @@
 #define PCI_DEVICE_ID_MPC8536		0x0051
 #define PCI_DEVICE_ID_P2020E		0x0070
 #define PCI_DEVICE_ID_P2020		0x0071
+#define PCI_DEVICE_ID_P2010E		0x0078
+#define PCI_DEVICE_ID_P2010		0x0079
+#define PCI_DEVICE_ID_P1020E		0x0100
+#define PCI_DEVICE_ID_P1020		0x0101
+#define PCI_DEVICE_ID_P1011E		0x0108
+#define PCI_DEVICE_ID_P1011		0x0109
+#define PCI_DEVICE_ID_P1022E		0x0110
+#define PCI_DEVICE_ID_P1022		0x0111
+#define PCI_DEVICE_ID_P1013E		0x0118
+#define PCI_DEVICE_ID_P1013		0x0119
+#define PCI_DEVICE_ID_P4080E		0x0400
+#define PCI_DEVICE_ID_P4080		0x0401
+#define PCI_DEVICE_ID_P4040E		0x0408
+#define PCI_DEVICE_ID_P4040		0x0409
 #define PCI_DEVICE_ID_MPC8641		0x7010
 #define PCI_DEVICE_ID_MPC8641D		0x7011
 #define PCI_DEVICE_ID_MPC8610		0x7018
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -365,6 +365,11 @@
 #define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
 #define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */

+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
+#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
+
 /* PCI Express capability registers */

 #define PCI_EXP_FLAGS		2	/* Capabilities register */
@@ -502,6 +507,7 @@
 #define PCI_EXT_CAP_ID_VC	2
 #define PCI_EXT_CAP_ID_DSN	3
 #define PCI_EXT_CAP_ID_PWR	4
+#define PCI_EXT_CAP_ID_ACS	13
 #define PCI_EXT_CAP_ID_ARI	14
 #define PCI_EXT_CAP_ID_ATS	15
 #define PCI_EXT_CAP_ID_SRIOV	16
@@ -662,4 +668,16 @@
 #define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
 #define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */

+/* Access Control Service */
+#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
+#define  PCI_ACS_SV		0x01	/* Source Validation */
+#define  PCI_ACS_TB		0x02	/* Translation Blocking */
+#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
+#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
+#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
+#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
+#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
+#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
+
 #endif /* LINUX_PCI_REGS_H */
--- a/include/linux/pcieport_if.h
+++ b/include/linux/pcieport_if.h
@@ -10,10 +10,7 @@
 #define _PCIEPORT_IF_H_

 /* Port Type */
-#define PCIE_RC_PORT			4	/* Root port of RC */
-#define PCIE_SW_UPSTREAM_PORT		5	/* Upstream port of Switch */
-#define PCIE_SW_DOWNSTREAM_PORT		6	/* Downstream port of Switch */
-#define PCIE_ANY_PORT			7
+#define PCIE_ANY_PORT			(~0)

 /* Service Type */
 #define PCIE_PORT_SERVICE_PME_SHIFT	0	/* Power Management Event */
@@ -25,17 +22,6 @@
 #define PCIE_PORT_SERVICE_VC_SHIFT	3	/* Virtual Channel */
 #define PCIE_PORT_SERVICE_VC		(1 << PCIE_PORT_SERVICE_VC_SHIFT)

-/* Root/Upstream/Downstream Port's Interrupt Mode */
-#define PCIE_PORT_NO_IRQ		(-1)
-#define PCIE_PORT_INTx_MODE		0
-#define PCIE_PORT_MSI_MODE		1
-#define PCIE_PORT_MSIX_MODE		2
-
-struct pcie_port_data {
-	int port_type;		/* Type of the port */
-	int port_irq_mode;	/* [0:INTx | 1:MSI | 2:MSI-X] */
-};
-
 struct pcie_device {
 	int 		irq;	    /* Service IRQ/MSI/MSI-X Vector */
 	struct pci_dev *port;	    /* Root/Upstream/Downstream Port */
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -18,10 +18,6 @@
 #include <linux/ioctl.h>
 #include <asm/byteorder.h>

-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-#include <asm/hw_breakpoint.h>
-#endif
-
 /*
 * User-space ABI bits:
 */
@@ -215,12 +211,12 @@ struct perf_event_attr {
 		__u32		wakeup_watermark; /* bytes before wakeup   */
 	};

-	union {
-		struct { /* Hardware breakpoint info */
-			__u64		bp_addr;
-			__u32		bp_type;
-			__u32		bp_len;
-		};
+	struct { /* Hardware breakpoint info */
+		__u64		bp_addr;
+		__u32		bp_type;
+		__u32		bp_len;
+		__u64		__bp_reserved_1;
+		__u64		__bp_reserved_2;
 	};

 	__u32			__reserved_2;
@@ -451,6 +447,10 @@ enum perf_callchain_context {
 # include <asm/perf_event.h>
 #endif

+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+#include <asm/hw_breakpoint.h>
+#endif
+
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/rculist.h>
@@ -565,10 +565,12 @@ struct perf_pending_entry {
 	void (*func)(struct perf_pending_entry *);
 };

-typedef void (*perf_callback_t)(struct perf_event *, void *);
-
 struct perf_sample_data;

+typedef void (*perf_overflow_handler_t)(struct perf_event *, int,
+					struct perf_sample_data *,
+					struct pt_regs *regs);
+
 /**
 * struct perf_event - performance event kernel representation:
 */
@@ -660,18 +662,12 @@ struct perf_event {
 	struct pid_namespace		*ns;
 	u64				id;

-	void (*overflow_handler)(struct perf_event *event,
-			int nmi, struct perf_sample_data *data,
-			struct pt_regs *regs);
+	perf_overflow_handler_t		overflow_handler;

 #ifdef CONFIG_EVENT_PROFILE
 	struct event_filter		*filter;
 #endif

-	perf_callback_t			callback;
-
-	perf_callback_t			event_callback;
-
 #endif /* CONFIG_PERF_EVENTS */
 };

@@ -781,7 +777,7 @@ extern struct perf_event *
 perf_event_create_kernel_counter(struct perf_event_attr *attr,
 				int cpu,
 				pid_t pid,
-				perf_callback_t callback);
+				perf_overflow_handler_t callback);
 extern u64 perf_event_read_value(struct perf_event *event,
 				 u64 *enabled, u64 *running);

@@ -876,6 +872,8 @@ extern void perf_output_copy(struct perf_output_handle *handle,
 			     const void *buf, unsigned int len);
 extern int perf_swevent_get_recursion_context(void);
 extern void perf_swevent_put_recursion_context(int rctx);
+extern void perf_event_enable(struct perf_event *event);
+extern void perf_event_disable(struct perf_event *event);
 #else
 static inline void
 perf_event_task_sched_in(struct task_struct *task, int cpu)		{ }
@@ -906,7 +904,8 @@ static inline void perf_event_fork(struct task_struct *tsk)		{ }
 static inline void perf_event_init(void)				{ }
 static inline int  perf_swevent_get_recursion_context(void)  { return -1; }
 static inline void perf_swevent_put_recursion_context(int rctx)		{ }
-
+static inline void perf_event_enable(struct perf_event *event)		{ }
+static inline void perf_event_disable(struct perf_event *event)		{ }
 #endif

 #define perf_output_put(handle, x) \
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -30,7 +30,7 @@

 /*
 * use drive write caching -- we need deferred error handling to be
- * able to sucessfully recover with this option (drive will return good
+ * able to successfully recover with this option (drive will return good
 * status as soon as the cdb is validated).
 */
 #if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -83,6 +83,8 @@ struct early_platform_driver {
 	struct platform_driver *pdrv;
 	struct list_head list;
 	int requested_id;
+	char *buffer;
+	int bufsize;
 };

 #define EARLY_PLATFORM_ID_UNSET -2
@@ -102,21 +104,29 @@ extern int early_platform_driver_probe(char *class_str,
 				       int nr_probe, int user_only);
 extern void early_platform_cleanup(void);

+#define early_platform_init(class_string, platdrv)		\
+	early_platform_init_buffer(class_string, platdrv, NULL, 0)

 #ifndef MODULE
-#define early_platform_init(class_string, platform_driver)		\
+#define early_platform_init_buffer(class_string, platdrv, buf, bufsiz)	\
 static __initdata struct early_platform_driver early_driver = {		\
 	.class_str = class_string,					\
-	.pdrv = platform_driver,					\
+	.buffer = buf,							\
+	.bufsize = bufsiz,						\
+	.pdrv = platdrv,						\
 	.requested_id = EARLY_PLATFORM_ID_UNSET,			\
 };									\
-static int __init early_platform_driver_setup_func(char *buf)		\
+static int __init early_platform_driver_setup_func(char *buffer)	\
 {									\
-	return early_platform_driver_register(&early_driver, buf);	\
+	return early_platform_driver_register(&early_driver, buffer);	\
 }									\
 early_param(class_string, early_platform_driver_setup_func)
 #else /* MODULE */
-#define early_platform_init(class_string, platform_driver)
+#define early_platform_init_buffer(class_string, platdrv, buf, bufsiz)	\
+static inline char *early_platform_driver_setup_func(void)		\
+{									\
+	return bufsiz ? buf : NULL;					\
+}
 #endif /* MODULE */

 #endif /* _PLATFORM_DEVICE_H_ */
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -73,6 +73,8 @@
 /* Quota format type IDs */
 #define	QFMT_VFS_OLD 1
 #define	QFMT_VFS_V0 2
+#define QFMT_OCFS2 3
+#define	QFMT_VFS_V1 4

 /* Size of block in which space limits are passed through the quota
 * interface */
@@ -334,7 +336,7 @@ struct quotactl_ops {

 struct quota_format_type {
 	int qf_fmt_id;	/* Quota format id */
-	struct quota_format_ops *qf_ops;	/* Operations of format */
+	const struct quota_format_ops *qf_ops;	/* Operations of format */
 	struct module *qf_owner;		/* Module implementing quota format */
 	struct quota_format_type *qf_next;
 };
@@ -394,7 +396,7 @@ struct quota_info {
 	struct rw_semaphore dqptr_sem;		/* serialize ops using quota_info struct, pointers from inode to dquots */
 	struct inode *files[MAXQUOTAS];		/* inodes of quotafiles */
 	struct mem_dqinfo info[MAXQUOTAS];	/* Information for each quota type */
-	struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
+	const struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
 };

 int register_quota_format(struct quota_format_type *fmt);
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -52,11 +52,63 @@
 #define REISERFS_IOC32_GETVERSION	FS_IOC32_GETVERSION
 #define REISERFS_IOC32_SETVERSION	FS_IOC32_SETVERSION

-/* Locking primitives */
-/* Right now we are still falling back to (un)lock_kernel, but eventually that
-   would evolve into real per-fs locks */
-#define reiserfs_write_lock( sb ) lock_kernel()
-#define reiserfs_write_unlock( sb ) unlock_kernel()
+/*
+ * Locking primitives. The write lock is a per superblock
+ * special mutex that has properties close to the Big Kernel Lock
+ * which was used in the previous locking scheme.
+ */
+void reiserfs_write_lock(struct super_block *s);
+void reiserfs_write_unlock(struct super_block *s);
+int reiserfs_write_lock_once(struct super_block *s);
+void reiserfs_write_unlock_once(struct super_block *s, int lock_depth);
+
+/*
+ * Several mutexes depend on the write lock.
+ * However sometimes we want to relax the write lock while we hold
+ * these mutexes, according to the release/reacquire on schedule()
+ * properties of the Bkl that were used.
+ * Reiserfs performances and locking were based on this scheme.
+ * Now that the write lock is a mutex and not the bkl anymore, doing so
+ * may result in a deadlock:
+ *
+ * A acquire write_lock
+ * A acquire j_commit_mutex
+ * A release write_lock and wait for something
+ * B acquire write_lock
+ * B can't acquire j_commit_mutex and sleep
+ * A can't acquire write lock anymore
+ * deadlock
+ *
+ * What we do here is avoiding such deadlock by playing the same game
+ * than the Bkl: if we can't acquire a mutex that depends on the write lock,
+ * we release the write lock, wait a bit and then retry.
+ *
+ * The mutexes concerned by this hack are:
+ * - The commit mutex of a journal list
+ * - The flush mutex
+ * - The journal lock
+ * - The inode mutex
+ */
+static inline void reiserfs_mutex_lock_safe(struct mutex *m,
+			       struct super_block *s)
+{
+	reiserfs_write_unlock(s);
+	mutex_lock(m);
+	reiserfs_write_lock(s);
+}
+
+/*
+ * When we schedule, we usually want to also release the write lock,
+ * according to the previous bkl based locking scheme of reiserfs.
+ */
+static inline void reiserfs_cond_resched(struct super_block *s)
+{
+	if (need_resched()) {
+		reiserfs_write_unlock(s);
+		schedule();
+		reiserfs_write_lock(s);
+	}
+}

 struct fid;

@@ -1329,7 +1381,11 @@ static inline loff_t max_reiserfs_offset(struct inode *inode)
 #define get_generation(s) atomic_read (&fs_generation(s))
 #define FILESYSTEM_CHANGED_TB(tb)  (get_generation((tb)->tb_sb) != (tb)->fs_gen)
 #define __fs_changed(gen,s) (gen != get_generation (s))
-#define fs_changed(gen,s) ({cond_resched(); __fs_changed(gen, s);})
+#define fs_changed(gen,s)		\
+({					\
+	reiserfs_cond_resched(s);	\
+	__fs_changed(gen, s);		\
+})

 /***************************************************************************/
 /*                  FIXATE NODES                                           */
@@ -2258,8 +2314,7 @@ __u32 r5_hash(const signed char *msg, int len);
 #define SPARE_SPACE 500

 /* prototypes from ioctl.c */
-int reiserfs_ioctl(struct inode *inode, struct file *filp,
-		   unsigned int cmd, unsigned long arg);
+long reiserfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
 long reiserfs_compat_ioctl(struct file *filp,
 		   unsigned int cmd, unsigned long arg);
 int reiserfs_unpack(struct inode *inode, struct file *filp);
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -7,6 +7,8 @@
 #ifdef __KERNEL__
 #include <linux/workqueue.h>
 #include <linux/rwsem.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
 #endif

 typedef enum {
@@ -355,6 +357,13 @@ struct reiserfs_sb_info {
 	struct reiserfs_journal *s_journal;	/* pointer to journal information */
 	unsigned short s_mount_state;	/* reiserfs state (valid, invalid) */

+	/* Serialize writers access, replace the old bkl */
+	struct mutex lock;
+	/* Owner of the lock (can be recursive) */
+	struct task_struct *lock_owner;
+	/* Depth of the lock, start from -1 like the bkl */
+	int lock_depth;
+
 	/* Comment? -Hans */
 	void (*end_io_handler) (struct buffer_head *, int);
 	hashf_t s_hash_function;	/* pointer to function which is used
@@ -408,6 +417,17 @@ struct reiserfs_sb_info {
 	char *s_qf_names[MAXQUOTAS];
 	int s_jquota_fmt;
 #endif
+#ifdef CONFIG_REISERFS_CHECK
+
+	struct tree_balance *cur_tb;	/*
+					 * Detects whether more than one
+					 * copy of tb exists per superblock
+					 * as a means of checking whether
+					 * do_balance is executing concurrently
+					 * against another tree reader/writer
+					 * on a same mount point.
+					 */
+#endif
 };

 /* Definitions of reiserfs on-disk properties: */
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1102,7 +1102,7 @@ struct sched_class {

 	void (*set_curr_task) (struct rq *rq);
 	void (*task_tick) (struct rq *rq, struct task_struct *p, int queued);
-	void (*task_new) (struct rq *rq, struct task_struct *p);
+	void (*task_fork) (struct task_struct *p);

 	void (*switched_from) (struct rq *this_rq, struct task_struct *task,
 			       int running);
@@ -1111,7 +1111,8 @@ struct sched_class {
 	void (*prio_changed) (struct rq *this_rq, struct task_struct *task,
 			     int oldprio, int running);

-	unsigned int (*get_rr_interval) (struct task_struct *task);
+	unsigned int (*get_rr_interval) (struct rq *rq,
+					 struct task_struct *task);

 #ifdef CONFIG_FAIR_GROUP_SCHED
 	void (*moved_group) (struct task_struct *p);
@@ -1151,8 +1152,6 @@ struct sched_entity {
 	u64			start_runtime;
 	u64			avg_wakeup;

-	u64			avg_running;
-
 #ifdef CONFIG_SCHEDSTATS
 	u64			wait_start;
 	u64			wait_max;
@@ -1175,7 +1174,6 @@ struct sched_entity {
 	u64			nr_failed_migrations_running;
 	u64			nr_failed_migrations_hot;
 	u64			nr_forced_migrations;
-	u64			nr_forced2_migrations;

 	u64			nr_wakeups;
 	u64			nr_wakeups_sync;
@@ -1840,7 +1838,8 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
 extern int sched_clock_stable;
 #endif

-extern unsigned long long sched_clock(void);
+/* ftrace calls sched_clock() directly */
+extern unsigned long long notrace sched_clock(void);

 extern void sched_clock_init(void);
 extern u64 sched_clock_cpu(int cpu);
@@ -1903,14 +1902,22 @@ extern unsigned int sysctl_sched_wakeup_granularity;
 extern unsigned int sysctl_sched_shares_ratelimit;
 extern unsigned int sysctl_sched_shares_thresh;
 extern unsigned int sysctl_sched_child_runs_first;
+
+enum sched_tunable_scaling {
+	SCHED_TUNABLESCALING_NONE,
+	SCHED_TUNABLESCALING_LOG,
+	SCHED_TUNABLESCALING_LINEAR,
+	SCHED_TUNABLESCALING_END,
+};
+extern enum sched_tunable_scaling sysctl_sched_tunable_scaling;
+
 #ifdef CONFIG_SCHED_DEBUG
-extern unsigned int sysctl_sched_features;
 extern unsigned int sysctl_sched_migration_cost;
 extern unsigned int sysctl_sched_nr_migrate;
 extern unsigned int sysctl_sched_time_avg;
 extern unsigned int sysctl_timer_migration;

-int sched_nr_latency_handler(struct ctl_table *table, int write,
+int sched_proc_update_handler(struct ctl_table *table, int write,
 		void __user *buffer, size_t *length,
 		loff_t *ppos);
 #endif
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -216,10 +216,10 @@

 #define UART_IIR_TOD	0x08	/* Character Timeout Indication Detected */

-#define UART_FCR_PXAR1	0x00	/* receive FIFO treshold = 1 */
-#define UART_FCR_PXAR8	0x40	/* receive FIFO treshold = 8 */
-#define UART_FCR_PXAR16	0x80	/* receive FIFO treshold = 16 */
-#define UART_FCR_PXAR32	0xc0	/* receive FIFO treshold = 32 */
+#define UART_FCR_PXAR1	0x00	/* receive FIFO threshold = 1 */
+#define UART_FCR_PXAR8	0x40	/* receive FIFO threshold = 8 */
+#define UART_FCR_PXAR16	0x80	/* receive FIFO threshold = 16 */
+#define UART_FCR_PXAR32	0xc0	/* receive FIFO threshold = 32 */



--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -215,5 +215,6 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_INEXIO	0x37
 #define SERIO_TOUCHIT213	0x38
 #define SERIO_W8001	0x39
+#define SERIO_DYNAPRO	0x3a

 #endif
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -57,10 +57,8 @@ struct intc_desc {
 	struct intc_sense_reg *sense_regs;
 	unsigned int nr_sense_regs;
 	char *name;
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	struct intc_mask_reg *ack_regs;
 	unsigned int nr_ack_regs;
-#endif
 };

 #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
@@ -73,7 +71,6 @@ struct intc_desc symbol __initdata = {					\
 	chipname,							\
 }

-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 #define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
 	mask_regs, prio_regs, sense_regs, ack_regs)			\
 struct intc_desc symbol __initdata = {					\
@@ -83,9 +80,11 @@ struct intc_desc symbol __initdata = {					\
 	chipname,							\
 	_INTC_ARRAY(ack_regs),						\
 }
-#endif

 void __init register_intc_controller(struct intc_desc *desc);
 int intc_set_priority(unsigned int irq, unsigned int prio);

+int reserve_irq_vector(unsigned int irq);
+void reserve_irq_legacy(void);
+
 #endif /* __SH_INTC_H */
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -0,0 +1,96 @@
+/*
+ * SuperH Pin Function Controller Support
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __SH_PFC_H
+#define __SH_PFC_H
+
+#include <asm-generic/gpio.h>
+
+typedef unsigned short pinmux_enum_t;
+typedef unsigned short pinmux_flag_t;
+
+#define PINMUX_TYPE_NONE            0
+#define PINMUX_TYPE_FUNCTION        1
+#define PINMUX_TYPE_GPIO            2
+#define PINMUX_TYPE_OUTPUT          3
+#define PINMUX_TYPE_INPUT           4
+#define PINMUX_TYPE_INPUT_PULLUP    5
+#define PINMUX_TYPE_INPUT_PULLDOWN  6
+
+#define PINMUX_FLAG_TYPE            (0x7)
+#define PINMUX_FLAG_WANT_PULLUP     (1 << 3)
+#define PINMUX_FLAG_WANT_PULLDOWN   (1 << 4)
+
+#define PINMUX_FLAG_DBIT_SHIFT      5
+#define PINMUX_FLAG_DBIT            (0x1f << PINMUX_FLAG_DBIT_SHIFT)
+#define PINMUX_FLAG_DREG_SHIFT      10
+#define PINMUX_FLAG_DREG            (0x3f << PINMUX_FLAG_DREG_SHIFT)
+
+struct pinmux_gpio {
+	pinmux_enum_t enum_id;
+	pinmux_flag_t flags;
+};
+
+#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
+#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
+
+struct pinmux_cfg_reg {
+	unsigned long reg, reg_width, field_width;
+	unsigned long *cnt;
+	pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_CFG_REG(name, r, r_width, f_width) \
+	.reg = r, .reg_width = r_width, .field_width = f_width,		\
+	.cnt = (unsigned long [r_width / f_width]) {}, \
+	.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
+
+struct pinmux_data_reg {
+	unsigned long reg, reg_width, reg_shadow;
+	pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_DATA_REG(name, r, r_width) \
+	.reg = r, .reg_width = r_width,	\
+	.enum_ids = (pinmux_enum_t [r_width]) \
+
+struct pinmux_range {
+	pinmux_enum_t begin;
+	pinmux_enum_t end;
+	pinmux_enum_t force;
+};
+
+struct pinmux_info {
+	char *name;
+	pinmux_enum_t reserved_id;
+	struct pinmux_range data;
+	struct pinmux_range input;
+	struct pinmux_range input_pd;
+	struct pinmux_range input_pu;
+	struct pinmux_range output;
+	struct pinmux_range mark;
+	struct pinmux_range function;
+
+	unsigned first_gpio, last_gpio;
+
+	struct pinmux_gpio *gpios;
+	struct pinmux_cfg_reg *cfg_regs;
+	struct pinmux_data_reg *data_regs;
+
+	pinmux_enum_t *gpio_data;
+	unsigned int gpio_data_size;
+
+	unsigned long *gpio_in_use;
+	struct gpio_chip chip;
+};
+
+int register_pinmux(struct pinmux_info *pip);
+
+#endif /* __SH_PFC_H */
--- a/include/linux/spi/mpc52xx_spi.h
+++ b/include/linux/spi/mpc52xx_spi.h
@@ -0,0 +1,10 @@
+
+#ifndef INCLUDE_MPC5200_SPI_H
+#define INCLUDE_MPC5200_SPI_H
+
+extern void mpc52xx_spi_set_premessage_hook(struct spi_master *master,
+					    void (*hook)(struct spi_message *m,
+							 void *context),
+					    void *hook_context);
+
+#endif
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -15,7 +15,7 @@
 * Some hardware works well with requests at spi_transfer scope:
 *
 *   -	Drivers leveraging smarter hardware, with fifos or DMA; or for half
- *	duplex (MicroWire) controllers.  Provide chipslect() and txrx_bufs(),
+ *	duplex (MicroWire) controllers.  Provide chipselect() and txrx_bufs(),
 *	and custom setup()/cleanup() methods.
 */

--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -832,4 +832,8 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 asmlinkage long sys_perf_event_open(
 		struct perf_event_attr __user *attr_uptr,
 		pid_t pid, int cpu, int group_fd, unsigned long flags);
+
+asmlinkage long sys_mmap_pgoff(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
 #endif
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -89,8 +89,8 @@ enum
 	KERN_VERSION=4,		/* string: compile time info */
 	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
 	KERN_PROF=6,		/* table: profiling information */
-	KERN_NODENAME=7,
-	KERN_DOMAINNAME=8,
+	KERN_NODENAME=7,	/* string: hostname */
+	KERN_DOMAINNAME=8,	/* string: domainname */

 	KERN_PANIC=15,		/* int: panic timeout */
 	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
@@ -102,8 +102,8 @@ enum
 	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
 	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
 	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
-	KERN_MODPROBE=28,
-	KERN_SG_BIG_BUFF=29,
+	KERN_MODPROBE=28,	/* string: modprobe path */
+	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
 	KERN_ACCT=30,		/* BSD process accounting parameters */
 	KERN_PPC_L2CR=31,	/* l2cr register on PPC */

@@ -150,7 +150,7 @@ enum
 	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
 	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
 	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
-	KERN_MAX_LOCK_DEPTH=74,
+	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
 	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
 	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
 };
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -190,9 +190,17 @@ struct tty_port_operations {
 	/* Control the DTR line */
 	void (*dtr_rts)(struct tty_port *port, int raise);
 	/* Called when the last close completes or a hangup finishes
-	   IFF the port was initialized. Do not use to free resources */
+	   IFF the port was initialized. Do not use to free resources. Called
+	   under the port mutex to serialize against activate/shutdowns */
 	void (*shutdown)(struct tty_port *port);
 	void (*drop)(struct tty_port *port);
+	/* Called under the port mutex from tty_port_open, serialized using
+	   the port mutex */
+        /* FIXME: long term getting the tty argument *out* of this would be
+           good for consoles */
+	int (*activate)(struct tty_port *port, struct tty_struct *tty);
+	/* Called on the final put of a port */
+	void (*destruct)(struct tty_port *port);
 };
 	
 struct tty_port {
@@ -206,12 +214,14 @@ struct tty_port {
 	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
 	unsigned long		flags;		/* TTY flags ASY_*/
 	struct mutex		mutex;		/* Locking */
+	struct mutex		buf_mutex;	/* Buffer alloc lock */
 	unsigned char		*xmit_buf;	/* Optional buffer */
 	unsigned int		close_delay;	/* Close port delay */
 	unsigned int		closing_wait;	/* Delay for output */
 	int			drain_delay;	/* Set to zero if no pure time
 						   based drain is needed else
 						   set to size of fifo */
+	struct kref		kref;		/* Ref counter */
 };

 /*
@@ -439,7 +449,7 @@ extern void initialize_tty_struct(struct tty_struct *tty,
 		struct tty_driver *driver, int idx);
 extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
 								int first_ok);
-extern void tty_release_dev(struct file *filp);
+extern int tty_release(struct inode *inode, struct file *filp);
 extern int tty_init_termios(struct tty_struct *tty);

 extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
@@ -454,6 +464,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
 extern void tty_port_init(struct tty_port *port);
 extern int tty_port_alloc_xmit_buf(struct tty_port *port);
 extern void tty_port_free_xmit_buf(struct tty_port *port);
+extern void tty_port_put(struct tty_port *port);
+
+extern inline struct tty_port *tty_port_get(struct tty_port *port)
+{
+	if (port)
+		kref_get(&port->kref);
+	return port;
+}
+
 extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
@@ -467,6 +486,8 @@ extern int tty_port_close_start(struct tty_port *port,
 extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
 extern void tty_port_close(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
+extern int tty_port_open(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
 extern inline int tty_port_users(struct tty_port *port)
 {
 	return port->count + port->blocked_open;
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -110,6 +110,10 @@ struct ucb1400 {
 	struct platform_device	*ucb1400_gpio;
 };

+struct ucb1400_pdata {
+	int	irq;
+};
+
 static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
 {
 	return ac97->bus->ops->read(ac97, reg);
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -331,6 +331,7 @@ struct usb_bus {
 	u8 otg_port;			/* 0, or number of OTG/HNP port */
 	unsigned is_b_host:1;		/* true during some HNP roleswitches */
 	unsigned b_hnp_enable:1;	/* OTG: did A-Host enable HNP? */
+	unsigned sg_tablesize;		/* 0 or largest number of sg list entries */

 	int devnum_next;		/* Next open device number in
 					 * round-robin allocation */
@@ -428,11 +429,9 @@ struct usb_tt;
 * @last_busy: time of last use
 * @autosuspend_delay: in jiffies
 * @connect_time: time device was first connected
- * @auto_pm: autosuspend/resume in progress
 * @do_remote_wakeup:  remote wakeup should be enabled
 * @reset_resume: needs reset instead of resume
 * @autosuspend_disabled: autosuspend disabled by the user
- * @autoresume_disabled: autoresume disabled by the user
 * @skip_sys_resume: skip the next system resume
 * @wusb_dev: if this is a Wireless USB device, link to the WUSB
 *	specific data for the device.
@@ -513,11 +512,9 @@ struct usb_device {
 	int autosuspend_delay;
 	unsigned long connect_time;

-	unsigned auto_pm:1;
 	unsigned do_remote_wakeup:1;
 	unsigned reset_resume:1;
 	unsigned autosuspend_disabled:1;
-	unsigned autoresume_disabled:1;
 	unsigned skip_sys_resume:1;
 #endif
 	struct wusb_dev *wusb_dev;
@@ -543,22 +540,20 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);

 /* USB autosuspend and autoresume */
 #ifdef CONFIG_USB_SUSPEND
-extern int usb_autopm_set_interface(struct usb_interface *intf);
 extern int usb_autopm_get_interface(struct usb_interface *intf);
 extern void usb_autopm_put_interface(struct usb_interface *intf);
 extern int usb_autopm_get_interface_async(struct usb_interface *intf);
 extern void usb_autopm_put_interface_async(struct usb_interface *intf);

-static inline void usb_autopm_enable(struct usb_interface *intf)
+static inline void usb_autopm_get_interface_no_resume(
+		struct usb_interface *intf)
 {
-	atomic_set(&intf->pm_usage_cnt, 0);
-	usb_autopm_set_interface(intf);
+	atomic_inc(&intf->pm_usage_cnt);
 }
-
-static inline void usb_autopm_disable(struct usb_interface *intf)
+static inline void usb_autopm_put_interface_no_suspend(
+		struct usb_interface *intf)
 {
-	atomic_set(&intf->pm_usage_cnt, 1);
-	usb_autopm_set_interface(intf);
+	atomic_dec(&intf->pm_usage_cnt);
 }

 static inline void usb_mark_last_busy(struct usb_device *udev)
@@ -568,12 +563,8 @@ static inline void usb_mark_last_busy(struct usb_device *udev)

 #else

-static inline int usb_autopm_set_interface(struct usb_interface *intf)
-{ return 0; }
-
 static inline int usb_autopm_get_interface(struct usb_interface *intf)
 { return 0; }
-
 static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
 { return 0; }

@@ -581,9 +572,11 @@ static inline void usb_autopm_put_interface(struct usb_interface *intf)
 { }
 static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
 { }
-static inline void usb_autopm_enable(struct usb_interface *intf)
+static inline void usb_autopm_get_interface_no_resume(
+		struct usb_interface *intf)
 { }
-static inline void usb_autopm_disable(struct usb_interface *intf)
+static inline void usb_autopm_put_interface_no_suspend(
+		struct usb_interface *intf)
 { }
 static inline void usb_mark_last_busy(struct usb_device *udev)
 { }
@@ -626,6 +619,10 @@ extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
 		unsigned ifnum);
 extern struct usb_host_interface *usb_altnum_to_altsetting(
 		const struct usb_interface *intf, unsigned int altnum);
+extern struct usb_host_interface *usb_find_alt_setting(
+		struct usb_host_config *config,
+		unsigned int iface_num,
+		unsigned int alt_num);


 /**
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -127,6 +127,7 @@ struct usb_function {
 	/* private: */
 	/* internals */
 	struct list_head		list;
+	DECLARE_BITMAP(endpoints, 32);
 };

 int usb_add_function(struct usb_configuration *, struct usb_function *);
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -33,6 +33,23 @@ enum usb_otg_state {
 	OTG_STATE_A_VBUS_ERR,
 };

+#define USB_OTG_PULLUP_ID		(1 << 0)
+#define USB_OTG_PULLDOWN_DP		(1 << 1)
+#define USB_OTG_PULLDOWN_DM		(1 << 2)
+#define USB_OTG_EXT_VBUS_INDICATOR	(1 << 3)
+#define USB_OTG_DRV_VBUS		(1 << 4)
+#define USB_OTG_DRV_VBUS_EXT		(1 << 5)
+
+struct otg_transceiver;
+
+/* for transceivers connected thru an ULPI interface, the user must
+ * provide access ops
+ */
+struct otg_io_access_ops {
+	int (*read)(struct otg_transceiver *otg, u32 reg);
+	int (*write)(struct otg_transceiver *otg, u32 val, u32 reg);
+};
+
 /*
 * the otg driver needs to interact with both device side and host side
 * usb controllers.  it decides which controller is active at a given
@@ -42,6 +59,7 @@ enum usb_otg_state {
 struct otg_transceiver {
 	struct device		*dev;
 	const char		*label;
+	unsigned int		 flags;

 	u8			default_a;
 	enum usb_otg_state	state;
@@ -49,10 +67,17 @@ struct otg_transceiver {
 	struct usb_bus		*host;
 	struct usb_gadget	*gadget;

+	struct otg_io_access_ops	*io_ops;
+	void __iomem			*io_priv;
+
 	/* to pass extra port status to the root hub */
 	u16			port_status;
 	u16			port_change;

+	/* initialize/shutdown the OTG controller */
+	int	(*init)(struct otg_transceiver *otg);
+	void	(*shutdown)(struct otg_transceiver *otg);
+
 	/* bind/unbind the host controller */
 	int	(*set_host)(struct otg_transceiver *otg,
 				struct usb_bus *host);
@@ -65,6 +90,10 @@ struct otg_transceiver {
 	int	(*set_power)(struct otg_transceiver *otg,
 				unsigned mA);

+	/* effective for A-peripheral, ignored for B devices */
+	int	(*set_vbus)(struct otg_transceiver *otg,
+				bool enabled);
+
 	/* for non-OTG B devices: set transceiver into suspend mode */
 	int	(*set_suspend)(struct otg_transceiver *otg,
 				int suspend);
@@ -85,6 +114,38 @@ extern int otg_set_transceiver(struct otg_transceiver *);
 extern void usb_nop_xceiv_register(void);
 extern void usb_nop_xceiv_unregister(void);

+/* helpers for direct access thru low-level io interface */
+static inline int otg_io_read(struct otg_transceiver *otg, u32 reg)
+{
+	if (otg->io_ops && otg->io_ops->read)
+		return otg->io_ops->read(otg, reg);
+
+	return -EINVAL;
+}
+
+static inline int otg_io_write(struct otg_transceiver *otg, u32 reg, u32 val)
+{
+	if (otg->io_ops && otg->io_ops->write)
+		return otg->io_ops->write(otg, reg, val);
+
+	return -EINVAL;
+}
+
+static inline int
+otg_init(struct otg_transceiver *otg)
+{
+	if (otg->init)
+		return otg->init(otg);
+
+	return 0;
+}
+
+static inline void
+otg_shutdown(struct otg_transceiver *otg)
+{
+	if (otg->shutdown)
+		otg->shutdown(otg);
+}

 /* for usb host and peripheral controller drivers */
 extern struct otg_transceiver *otg_get_transceiver(void);
@@ -97,6 +158,12 @@ otg_start_hnp(struct otg_transceiver *otg)
 	return otg->start_hnp(otg);
 }

+/* Context: can sleep */
+static inline int
+otg_set_vbus(struct otg_transceiver *otg, bool enabled)
+{
+	return otg->set_vbus(otg, enabled);
+}

 /* for HCDs */
 static inline int
@@ -105,7 +172,6 @@ otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 	return otg->set_host(otg, host);
 }

-
 /* for usb peripheral controller drivers */

 /* Context: can sleep */
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -39,8 +39,6 @@ enum port_dev_state {
 * @serial: pointer back to the struct usb_serial owner of this port.
 * @port: pointer to the corresponding tty_port for this port.
 * @lock: spinlock to grab when updating portions of this structure.
- * @mutex: mutex used to synchronize serial_open() and serial_close()
- *	access for this port.
 * @number: the number of the port (the minor number).
 * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
 * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
@@ -77,7 +75,6 @@ struct usb_serial_port {
 	struct usb_serial	*serial;
 	struct tty_port		port;
 	spinlock_t		lock;
-	struct mutex            mutex;
 	unsigned char		number;

 	unsigned char		*interrupt_in_buffer;
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __LINUX_USB_ULPI_H
+#define __LINUX_USB_ULPI_H
+
+struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
+					unsigned int flags);
+
+#endif /* __LINUX_USB_ULPI_H */
--- a/include/linux/usb/wusb.h
+++ b/include/linux/usb/wusb.h
@@ -74,7 +74,7 @@ enum {
 * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
 * data. In order to avoid confusion and enforce types, we wrap it.
 *
- * Make it packed, as we use it in some hw defintions.
+ * Make it packed, as we use it in some hw definitions.
 */
 struct wusb_ckhdid {
 	u8 data[16];
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -56,7 +56,9 @@
 	US_FLAG(SANE_SENSE,     0x00008000)			\
 		/* Sane Sense (> 18 bytes) */			\
 	US_FLAG(CAPACITY_OK,	0x00010000)			\
-		/* READ CAPACITY response is correct */
+		/* READ CAPACITY response is correct */		\
+	US_FLAG(BAD_SENSE,	0x00020000)			\
+		/* Bad Sense (never more than 18 bytes) */

 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -128,6 +128,29 @@ struct usbdevfs_hub_portinfo {
 #ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
+
+struct usbdevfs_ctrltransfer32 {
+        u8 bRequestType;
+        u8 bRequest;
+        u16 wValue;
+        u16 wIndex;
+        u16 wLength;
+        u32 timeout;  /* in milliseconds */
+        compat_caddr_t data;
+};
+
+struct usbdevfs_bulktransfer32 {
+        compat_uint_t ep;
+        compat_uint_t len;
+        compat_uint_t timeout; /* in milliseconds */
+        compat_caddr_t data;
+};
+
+struct usbdevfs_disconnectsignal32 {
+        compat_int_t signr;
+        compat_caddr_t context;
+};
+
 struct usbdevfs_urb32 {
 	unsigned char type;
 	unsigned char endpoint;
@@ -153,7 +176,9 @@ struct usbdevfs_ioctl32 {
 #endif /* __KERNEL__ */

 #define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
 #define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
 #define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
 #define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
 #define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
@@ -166,6 +191,7 @@ struct usbdevfs_ioctl32 {
 #define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
 #define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
 #define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
 #define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
 #define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
 #define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -361,6 +361,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
 #define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
 #define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
+#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */

 /*
 *	F O R M A T   E N U M E R A T I O N
@@ -490,7 +491,7 @@ struct v4l2_jpegcompression {
 				 * you do, leave them untouched.
 				 * Inluding less markers will make the
 				 * resulting code smaller, but there will
-				 * be fewer aplications which can read it.
+				 * be fewer applications which can read it.
 				 * The presence of the APP and COM marker
 				 * is influenced by APP_len and COM_len
 				 * ONLY, not by this property! */
@@ -563,6 +564,7 @@ struct v4l2_framebuffer {
 #define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
 #define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
 #define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
 /*  Flags for the 'flags' field. */
 #define V4L2_FBUF_FLAG_PRIMARY		0x0001
 #define V4L2_FBUF_FLAG_OVERLAY		0x0002
@@ -570,6 +572,7 @@ struct v4l2_framebuffer {
 #define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
 #define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
 #define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040

 struct v4l2_clip {
 	struct v4l2_rect        c;
@@ -912,8 +915,10 @@ enum v4l2_colorfx {
 #define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
 #define V4L2_CID_BAND_STOP_FILTER		(V4L2_CID_BASE+33)

+#define V4L2_CID_ROTATE				(V4L2_CID_BASE+34)
+#define V4L2_CID_BG_COLOR			(V4L2_CID_BASE+35)
 /* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+34)
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+36)

 /*  MPEG-class control IDs defined by V4L2 */
 #define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -25,6 +25,7 @@ typedef void (*work_func_t)(struct work_struct *work);
 struct work_struct {
 	atomic_long_t data;
 #define WORK_STRUCT_PENDING 0		/* T if work item pending execution */
+#define WORK_STRUCT_STATIC  1		/* static initializer (debugobjects) */
 #define WORK_STRUCT_FLAG_MASK (3UL)
 #define WORK_STRUCT_WQ_DATA_MASK (~WORK_STRUCT_FLAG_MASK)
 	struct list_head entry;
@@ -35,6 +36,7 @@ struct work_struct {
 };

 #define WORK_DATA_INIT()	ATOMIC_LONG_INIT(0)
+#define WORK_DATA_STATIC_INIT()	ATOMIC_LONG_INIT(2)

 struct delayed_work {
 	struct work_struct work;
@@ -63,7 +65,7 @@ struct execute_work {
 #endif

 #define __WORK_INITIALIZER(n, f) {				\
-	.data = WORK_DATA_INIT(),				\
+	.data = WORK_DATA_STATIC_INIT(),			\
 	.entry	= { &(n).entry, &(n).entry },			\
 	.func = (f),						\
 	__WORK_INIT_LOCKDEP_MAP(#n, &(n))			\
@@ -91,6 +93,14 @@ struct execute_work {
 #define PREPARE_DELAYED_WORK(_work, _func)			\
 	PREPARE_WORK(&(_work)->work, (_func))

+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+extern void __init_work(struct work_struct *work, int onstack);
+extern void destroy_work_on_stack(struct work_struct *work);
+#else
+static inline void __init_work(struct work_struct *work, int onstack) { }
+static inline void destroy_work_on_stack(struct work_struct *work) { }
+#endif
+
 /*
 * initialize all of a work item in one go
 *
@@ -99,24 +109,36 @@ struct execute_work {
 * to generate better code.
 */
 #ifdef CONFIG_LOCKDEP
-#define INIT_WORK(_work, _func)						\
+#define __INIT_WORK(_work, _func, _onstack)				\
 	do {								\
 		static struct lock_class_key __key;			\
 									\
+		__init_work((_work), _onstack);				\
 		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
 		lockdep_init_map(&(_work)->lockdep_map, #_work, &__key, 0);\
 		INIT_LIST_HEAD(&(_work)->entry);			\
 		PREPARE_WORK((_work), (_func));				\
 	} while (0)
 #else
-#define INIT_WORK(_work, _func)						\
+#define __INIT_WORK(_work, _func, _onstack)				\
 	do {								\
+		__init_work((_work), _onstack);				\
 		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
 		INIT_LIST_HEAD(&(_work)->entry);			\
 		PREPARE_WORK((_work), (_func));				\
 	} while (0)
 #endif

+#define INIT_WORK(_work, _func)					\
+	do {							\
+		__INIT_WORK((_work), (_func), 0);		\
+	} while (0)
+
+#define INIT_WORK_ON_STACK(_work, _func)			\
+	do {							\
+		__INIT_WORK((_work), (_func), 1);		\
+	} while (0)
+
 #define INIT_DELAYED_WORK(_work, _func)				\
 	do {							\
 		INIT_WORK(&(_work)->work, (_func));		\
@@ -125,22 +147,16 @@ struct execute_work {

 #define INIT_DELAYED_WORK_ON_STACK(_work, _func)		\
 	do {							\
-		INIT_WORK(&(_work)->work, (_func));		\
+		INIT_WORK_ON_STACK(&(_work)->work, (_func));	\
 		init_timer_on_stack(&(_work)->timer);		\
 	} while (0)

-#define INIT_DELAYED_WORK_DEFERRABLE(_work, _func)			\
+#define INIT_DELAYED_WORK_DEFERRABLE(_work, _func)		\
 	do {							\
 		INIT_WORK(&(_work)->work, (_func));		\
 		init_timer_deferrable(&(_work)->timer);		\
 	} while (0)

-#define INIT_DELAYED_WORK_ON_STACK(_work, _func)		\
-	do {							\
-		INIT_WORK(&(_work)->work, (_func));		\
-		init_timer_on_stack(&(_work)->timer);		\
-	} while (0)
-
 /**
 * work_pending - Find out whether a work item is currently pending
 * @work: The work item in question