Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
ACPI 6.3 adds additional fields to the MADT GICC
structure to describe SPE PPI's. We pick these out
of the cached reference to the madt_gicc structure
similarly to the core PMU code. We then create a platform
device referring to the IRQ and let the user/module loader
decide whether to load the SPE driver.
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This was added part of the original commit which added MMU definitions.
commit 4f04d8f005 ("arm64: MMU definitions").
These symbols never got used as confirmed from a git log search.
git log -p arch/arm64/ | grep PTE_TYPE_FAULT
git log -p arch/arm64/ | grep PMD_TYPE_FAULT
These probably meant to identify non present entries which can now be
achieved with PMD_SECT_VALID or PTE_VALID bits. Hence just drop these
unused symbols which are not required anymore.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARMv8.5 introduces the FRINT series of instructions for rounding floating
point numbers to integers. Provide a capability to userspace in order to
allow applications to determine if the system supports these instructions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARMv8.5 adds new instructions XAFLAG and AXFLAG to translate the
representation of the results of floating point comparisons between the
native ARM format and an alternative format used by some software. Add
a hwcap allowing userspace to determine if they are present, since we
referred to earlier CondM extensions as FLAGM call these extensions
FLAGM2.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Wire up the special helper functions to manipulate aliases of vmalloc
regions in the linear map.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Using IRQ priority masking to enable/disable interrupts is a bit
sensitive as it requires to deal with both ICC_PMR_EL1 and PSR.I.
Introduce some validity checks to both highlight the states in which
functions dealing with IRQ enabling/disabling can (not) be called, and
bark a warning when called in an unexpected state.
Since these checks are done on hotpaths, introduce a build option to
choose whether to do the checking.
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].
In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.
GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.
[1] https://www.spinics.net/lists/arm-kernel/msg716956.html
Fixes: 4a503217ce ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull arm64 fixes from Will Deacon:
"This is mainly a couple of email address updates to MAINTAINERS, but
we've also fixed a UAPI build issue with musl libc and an accidental
double-initialisation of our pgd_cache due to a naming conflict with a
weak symbol.
There are a couple of outstanding issues that have been reported, but
it doesn't look like they're new and we're still a long way off from
fully debugging them.
Summary:
- Fix use of #include in UAPI headers for compatability with musl libc
- Update email addresses in MAINTAINERS
- Fix initialisation of pgd_cache due to name collision with weak symbol"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: don't initialize pgd_cache twice
MAINTAINERS: Update my email address
arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>
arm64: ssbd: explicitly depend on <linux/prctl.h>
MAINTAINERS: Update my email address to use @kernel.org
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When PGD_SIZE != PAGE_SIZE, arm64 uses kmem_cache for allocation of PGD
memory. That cache was initialized twice: first through
pgtable_cache_init() alias and then as an override for weak
pgd_cache_init().
Remove the alias from pgtable_cache_init() and keep the only pgd_cache
initialization in pgd_cache_init().
Fixes: caa8413601 ("x86/mm: Initialize PGD cache during mm initialization")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pulling linux/prctl.h into asm/ptrace.h in the arm64 UAPI headers causes
userspace build issues for any program (e.g. strace and qemu) that
includes both <sys/prctl.h> and <linux/ptrace.h> when using musl libc:
| error: redefinition of 'struct prctl_mm_map'
| struct prctl_mm_map {
See 6d4a106e19
for a public example of people working around this issue.
Although it's a bit grotty, fix this breakage by duplicating the prctl
constant definitions. Since these are part of the kernel ABI, they
cannot be changed in future and so it's not the end of the world to have
them open-coded.
Fixes: 43d4da2c45 ("arm64/sve: ptrace and ELF coredump support")
Cc: stable@vger.kernel.org
Acked-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Anisse Astier <aastier@freebox.fr>
Signed-off-by: Will Deacon <will.deacon@arm.com>
If the cache line size is greater than ARCH_DMA_MINALIGN (128),
the warning shows and it's tainted as TAINT_CPU_OUT_OF_SPEC.
However, it's not good because as discussed in the thread [1], the cpu
cache line size will be problem only on non-coherent devices.
Since the coherent flag is already introduced to struct device,
show the warning only if the device is non-coherent device and
ARCH_DMA_MINALIGN is smaller than the cpu cache size.
[1] https://lore.kernel.org/linux-arm-kernel/20180514145703.celnlobzn3uh5tc2@localhost/
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: Zhang Lei <zhang.lei@jp.fujitsu.com>
[catalin.marinas@arm.com: removed 'if' block for WARN_TAINT]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull arm64 fixes from Will Deacon:
"Here are some arm64 fixes for -rc5.
The only non-trivial change (in terms of the diffstat) is fixing our
SVE ptrace API for big-endian machines, but the majority of this is
actually the addition of much-needed comments and updates to the
documentation to try to avoid this mess biting us again in future.
There are still a couple of small things on the horizon, but nothing
major at this point.
Summary:
- Fix broken SVE ptrace API when running in a big-endian configuration
- Fix performance regression due to off-by-one in TLBI range checking
- Fix build regression when using Clang"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sve: Fix missing SVE/FPSIMD endianness conversions
arm64: tlbflush: Ensure start/end of address range are aligned to stride
arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGS
The in-memory representation of SVE and FPSIMD registers is
different: the FPSIMD V-registers are stored as single 128-bit
host-endian values, whereas SVE registers are stored in an
endianness-invariant byte order.
This means that the two representations differ when running on a
big-endian host. But we blindly copy data from one representation
to another when converting between the two, resulting in the
register contents being unintentionally byteswapped in certain
situations. Currently this can be triggered by the first SVE
instruction after a syscall, for example (though the potential
trigger points may vary in future).
So, fix the conversion functions fpsimd_to_sve(), sve_to_fpsimd()
and sve_sync_from_fpsimd_zeropad() to swab where appropriate.
There is no common swahl128() or swab128() that we could use here.
Maybe it would be worth making this generic, but for now add a
simple local hack.
Since the byte order differences are exposed in ABI, also clarify
the documentation.
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alan Hayward <alan.hayward@arm.com>
Cc: Julien Grall <julien.grall@arm.com>
Fixes: bc0ee47603 ("arm64/sve: Core task context handling")
Fixes: 8cd969d28f ("arm64/sve: Signal handling support")
Fixes: 43d4da2c45 ("arm64/sve: ptrace and ELF coredump support")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
[will: Fix typos in comments and docs spotted by Julien]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Since commit 3d65b6bbc0 ("arm64: tlbi: Set MAX_TLBI_OPS to
PTRS_PER_PTE"), we resort to per-ASID invalidation when attempting to
perform more than PTRS_PER_PTE invalidation instructions in a single
call to __flush_tlb_range(). Whilst this is beneficial, the mmu_gather
code does not ensure that the end address of the range is rounded-up
to the stride when freeing intermediate page tables in pXX_free_tlb(),
which defeats our range checking.
Align the bounds passed into __flush_tlb_range().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In set_pte_at(), we read the old pte value so that it can be passed into
checks for racy hw updates. These checks are only performed for
CONFIG_DEBUG_VM, and the value is not used otherwise.
Since we read the pte value with READ_ONCE(), the compiler cannot elide
the redundant read for !CONFIG_DEBUG_VM kernels.
Let's ameliorate matters by moving the read and the checks into a
helper, __check_racy_pte_update(), which only performs the read when the
value will be used. This also allows us to reformat the conditions for
clarity.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Pull arm64 fixes from Will Deacon:
"Another round of mostly-benign fixes, the exception being a boot crash
on SVE2-capable CPUs (although I don't know where you'd find such a
thing, so maybe it's benign too).
We're in the process of resolving some big-endian ptrace breakage, so
I'll probably have some more for you next week.
Summary:
- Fix boot crash on platforms with SVE2 due to missing register
encoding
- Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y
- Move cpu_logical_map into smp.h for use by upcoming irqchip drivers
- Trivial typo fix in comment
- Disable some useless, noisy warnings from GCC 9"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Silence gcc warnings about arch ABI drift
ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix
arm64: arch_timer: mark functions as __always_inline
arm64: smp: Moved cpu_logical_map[] to smp.h
arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()
Add PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on arm64.
We don't need any special handling for PTRACE_SYSEMU_SINGLESTEP.
It's quite difficult to generalize handling PTRACE_SYSEMU cross
architectures and avoid calls to tracehook_report_syscall_entry twice.
Different architecture have different mechanism to indicate NO_SYSCALL
and trying to generalise adds more code for no gain.
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
x86 and um use 31 and 32 for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP
while powerpc uses different value maybe for legacy reasons.
Though handling of PTRACE_SYSEMU can be made architecture independent,
it's hard to make these definations generic. To add to this existing
mess few architectures like arm, c6x and sh use 31 for PTRACE_GETFDPIC
(get the ELF fdpic loadmap address). It's not possible to move the
definations to generic headers.
So we unfortunately have to duplicate the same defination to ARM64 if
we need to support PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If CONFIG_FUNCTION_GRAPH_TRACER is enabled function
arch_counter_get_cntvct() is marked as notrace. However, function
__arch_counter_get_cntvct is marked as inline. If
CONFIG_OPTIMIZE_INLINING is set that will make the two functions
tracable which they shouldn't.
Rework so that functions __arch_counter_get_* are marked with
__always_inline so they will be inlined even if CONFIG_OPTIMIZE_INLINING
is turned on.
Fixes: 0ea415390c ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters")
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
asm/smp.h is included by linux/smp.h and some drivers, in particular
irqchip drivers can access cpu_logical_map[] in order to perform SMP
affinity tasks. Make arm64 consistent with other architectures here.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Even though they have got the same value, PMD_TYPE_SECT and PUD_TYPE_SECT
get used for kernel huge mappings. But before that first the table bit gets
cleared using leaf level PTE_TABLE_BIT. Though functionally they are same,
we should use page table level specific macros to be consistent as per the
MMU specifications. Create page table level specific wrappers for kernel
huge mapping entries and just drop mk_sect_prot() which does not have any
other user.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
cache_line_size is derived from CTR_EL0.CWG field and is called mostly
for I/O device drivers. For some platforms like the HiSilicon Kunpeng920
server SoC, cache line sizes are different between L1/2 cache and L3
cache while L1 cache line size is 64-byte and L3 is 128-byte, but
CTR_EL0.CWG is misreporting using L1 cache line size.
We shall correct the right value which is important for I/O performance.
Let's update the cache line size if it is detected from DT or PPTT
information.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Reported-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When the kernel is compiled with CONFIG_KERNEL_MODE_NEON, some part of
the kernel may be able to use FPSIMD/SVE. This is for instance the case
for crypto code.
Any use of FPSIMD/SVE in the kernel are clearly marked by using the
function kernel_neon_{begin, end}. Furthermore, this can only be used
when may_use_simd() returns true.
The current implementation of may_use_simd() allows softirq to use
FPSIMD/SVE unless it is currently in use (i.e kernel_neon_busy is true).
When in use, softirqs usually fall back to a software method.
At the moment, as a softirq may use FPSIMD/SVE, softirqs are disabled
when touching the FPSIMD/SVE context. This has the drawback to disable
all softirqs even if they are not using FPSIMD/SVE.
Since a softirq is supposed to check may_use_simd() anyway before
attempting to use FPSIMD/SVE, there is limited reason to keep softirq
disabled when touching the FPSIMD/SVE context. Instead, we can simply
disable preemption and mark the FPSIMD/SVE context as in use by setting
CPU's fpsimd_context_busy flag.
Two new helpers {get, put}_cpu_fpsimd_context are introduced to mark
the area using FPSIMD/SVE context and they are used to replace
local_bh_{disable, enable}. The functions kernel_neon_{begin, end} are
also re-implemented to use the new helpers.
Additionally, double-underscored versions of the helpers are provided to
called when preemption is already disabled. These are only relevant on
paths where irqs are disabled anyway, so they are not needed for
correctness in the current code. Let's use them anyway though: this
marks critical sections clearly and will help to avoid mistakes during
future maintenance.
The change has been benchmarked on Linux 5.1-rc4 with defconfig.
On Juno2:
* hackbench 100 process 1000 (10 times)
* .7% quicker
On ThunderX 2:
* hackbench 1000 process 1000 (20 times)
* 3.4% quicker
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The only external user of fpsimd_save() and fpsimd_flush_cpu_state() is
the KVM FPSIMD code.
A following patch will introduce a mechanism to acquire owernship of the
FPSIMD/SVE context for performing context management operations. Rather
than having to export the new helpers to get/put the context, we can just
introduce a new function to combine fpsimd_save() and
fpsimd_flush_cpu_state().
This has also the advantage to remove any external call of fpsimd_save()
and fpsimd_flush_cpu_state(), so they can be turned static.
Lastly, the new function can also be used in the PM notifier.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The function sve_flush_cpu_state() has been removed in commit 21cdd7fd76
("KVM: arm64: Remove eager host SVE state saving").
So remove the associated prototype in asm/fpsimd.h.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
PTE_VALID signifies that the last level page table entry is valid and it is
MMU recognized while walking the page table. This is not a software defined
PTE bit and should not be listed like one. Just move it to appropriate
header file.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull yet more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review
and analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
treewide: Add SPDX license identifier - Kbuild
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
...
Pull arm64 fixes from Will Deacon:
"The fixes are still trickling in for arm64, but the only really
significant one here is actually fixing a regression in the botched
module relocation range checking merged for -rc2.
Hopefully we've nailed it this time.
- Fix implementation of our set_personality() system call, which
wasn't being wrapped properly
- Fix system call function types to keep CFI happy
- Fix siginfo layout when delivering SIGKILL after a kernel fault
- Really fix module relocation range checking"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: use the correct function type for __arm64_sys_ni_syscall
arm64: use the correct function type in SYSCALL_DEFINE0
arm64: fix syscall_fn_t type
signal/arm64: Use force_sig not force_sig_fault for SIGKILL
arm64/module: revert to unsigned interpretation of ABS16/32 relocations
arm64: Fix the arm64_personality() syscall wrapper redirection
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although a syscall defined using SYSCALL_DEFINE0 doesn't accept
parameters, use the correct function type to avoid indirect call
type mismatches with Control-Flow Integrity checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Syscall wrappers in <asm/syscall_wrapper.h> use const struct pt_regs *
as the argument type. Use const in syscall_fn_t as well to fix indirect
call type mismatches with Control-Flow Integrity checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull KVM fixes from Paolo Bonzini:
"The usual smattering of fixes and tunings that came in too late for
the merge window, but should not wait four months before they appear
in a release.
I also travelled a bit more than usual in the first part of May, which
didn't help with picking up patches and reports promptly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
KVM: x86: fix return value for reserved EFER
tools/kvm_stat: fix fields filter for child events
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
kvm: selftests: aarch64: compile with warnings on
kvm: selftests: aarch64: fix default vm mode
kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
x86/kvm/pmu: Set AMD's virt PMU version to 1
KVM: x86: do not spam dmesg with VMCS/VMCB dumps
kvm: Check irqchip mode before assign irqfd
kvm: svm/avic: fix off-by-one in checking host APIC ID
KVM: selftests: do not blindly clobber registers in guest asm
KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
kvm: vmx: Fix -Wmissing-prototypes warnings
KVM: nVMX: Fix using __this_cpu_read() in preemptible context
kvm: fix compilation on s390
...
Pull more arm64 fixes from Will Deacon:
- Fix incorrect LDADD instruction encoding in our disassembly macros
- Disable the broken ARM64_PSEUDO_NMI support for now
- Add workaround for Cortex-A76 CPU erratum #1463225
- Handle Cortex-A76/Neoverse-N1 erratum #1418040 w/ existing workaround
- Fix IORT build failure if IOMMU_SUPPORT=n
- Fix place-relative module relocation range checking and its
interaction with KASLR
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: insn: Add BUILD_BUG_ON() for invalid masks
arm64: insn: Fix ldadd instruction encoding
arm64: Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now
arm64: Handle erratum 1418040 as a superset of erratum 1188873
arm64/module: deal with ambiguity in PRELxx relocation ranges
ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled
arm64/kernel: kaslr: reduce module randomization range to 2 GB
arm64: errata: Add workaround for Cortex-A76 erratum #1463225
arm64: Remove useless message during oops
Detect invalid instruction masks at build time. Some versions of GCC can
warn about the situation, but not all of them, it seems.
Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
GCC 8.1.0 reports that the ldadd instruction encoding, recently added to
insn.c, doesn't match the mask and couldn't possibly be identified:
linux/arch/arm64/include/asm/insn.h: In function 'aarch64_insn_is_ldadd':
linux/arch/arm64/include/asm/insn.h:280:257: warning: bitwise comparison always evaluates to false [-Wtautological-compare]
Bits [31:30] normally encode the size of the instruction (1 to 8 bytes)
and the current instruction value only encodes the 4- and 8-byte
variants. At the moment only the BPF JIT needs this instruction, and
doesn't require the 1- and 2-byte variants, but to be consistent with
our other ldr and str instruction encodings, clear the size field in the
insn value.
Fixes: 34b8ab091f ("bpf, arm64: use more scalable stadd over ldxr / stxr loop in xadd")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
KVM's pmu.c contains the __hyp_text needed to switch the pmu registers
between host and guest. Because this isn't covered by the 'hyp' Makefile,
it can be built with kasan and friends when these are enabled in Kconfig.
When starting a guest, this results in:
| Kernel panic - not syncing: HYP panic:
| PS:a00003c9 PC:000083000028ada0 ESR:86000007
| FAR:000083000028ada0 HPFAR:0000000029df5300 PAR:0000000000000000
| VCPU:000000004e10b7d6
| CPU: 0 PID: 3088 Comm: qemu-system-aar Not tainted 5.2.0-rc1 #11026
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Plat
| Call trace:
| dump_backtrace+0x0/0x200
| show_stack+0x20/0x30
| dump_stack+0xec/0x158
| panic+0x1ec/0x420
| panic+0x0/0x420
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x002,25006082
| Memory Limit: none
| ---[ end Kernel panic - not syncing: HYP panic:
This is caused by functions in pmu.c calling the instrumented
code, which isn't mapped to hyp. From objdump -r:
| RELOCATION RECORDS FOR [.hyp.text]:
| OFFSET TYPE VALUE
| 0000000000000010 R_AARCH64_CALL26 __sanitizer_cov_trace_pc
| 0000000000000018 R_AARCH64_CALL26 __asan_load4_noabort
| 0000000000000024 R_AARCH64_CALL26 __asan_load4_noabort
Move the affected code to a new file under 'hyp's Makefile.
Fixes: 3d91befbb3 ("arm64: KVM: Enable !VHE support for :G/:H perf event modifiers")
Cc: Andrew Murray <Andrew.Murray@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We already mitigate erratum 1188873 affecting Cortex-A76 and
Neoverse-N1 r0p0 to r2p0. It turns out that revisions r0p0 to
r3p1 of the same cores are affected by erratum 1418040, which
has the same workaround as 1188873.
Let's expand the range of affected revisions to match 1418040,
and repaint all occurences of 1188873 to 1418040. Whilst we're
there, do a bit of reformating in silicon-errata.txt and drop
a now unnecessary dependency on ARM_ARCH_TIMER_OOL_WORKAROUND.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum
that can prevent interrupts from being taken when single-stepping.
This patch implements a software workaround to prevent userspace from
effectively being able to disable interrupts.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull arm64 fixes from Will Deacon:
- Fix SPE probe failure when backing auxbuf with high-order pages
- Fix handling of DMA allocations from outside of the vmalloc area
- Fix generation of build-id ELF section for vDSO object
- Disable huge I/O mappings if kernel page table dumping is enabled
- A few other minor fixes (comments, kconfig etc)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vdso: Explicitly add build-id option
arm64/mm: Inhibit huge-vmap with ptdump
arm64: Print physical address of page table base in show_pte()
arm64: don't trash config with compat symbol if COMPAT is disabled
arm64: assembler: Update comment above cond_yield_neon() macro
drivers/perf: arm_spe: Don't error on high-order pages for aux buf
arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable
