Alex writes:
"The big changes for 3.7 include:
- Asynchronous VM page table updates for Cayman/SI
- 2 level VM page table support. Saves memory compared to 1 level
page tables.
- Reworked PLL handing in the display code allows lots more
combinations of monitors to work, including more than two
DP displays assuming compatible clocks across shared PLLs.
This also allows us to power down extra PLLs when we can
share a single one across multiple displays which saves power.
- Native backlight control on ATOMBIOS systems.
- Improved ACPI support for interacting with the GPU. Fixes
backlight control on some laptops.
- Document AMD ACPI interfaces
- Lots of code cleanup
- Bug fixes"
* 'drm-next-3.7' of git://people.freedesktop.org/~agd5f/linux: (79 commits)
drm/radeon: add vm set_page() callback for SI
drm/radeon: rework the vm_flush interface
drm/radeon: use WRITE_DATA packets for vm flush on SI
drm/radeon/pm: fix multi-head profile handling on BTC+ (v2)
drm/radeon: fix radeon power state debug output
drm/radeon: force MSIs on RS690 asics
drm/radeon: Add MSI quirk for gateway RS690
drm/radeon: allow MIP_ADDRESS=0 for MSAA textures on Evergreen
drm/radeon/kms: allow STRMOUT_BASE_UPDATE on RS780 and RS880
drm/radeon: add 2-level VM pagetables support v9
drm/radeon: refactor set_page chipset interface v5
drm/radeon: Fix scratch register leak in IB test.
drm/radeon: restore backlight level on resume
drm/radeon: add get_backlight_level callback
drm/radeon: only adjust default clocks on NI GPUs
drm/radeon: validate PPLL in crtc fixup
drm/radeon: work around KMS modeset limitations in PLL allocation (v2)
drm/radeon: make non-DP PPLL sharing more robust
drm/radeon: store the encoder in the radeon_crtc
drm/radeon: rework crtc pll setup to better support PPLL sharing
...
Pass the vm and ring index rather than an IB. This allows
us to use the vm_flush interface for non-IB cases in the
future.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Previously read-only KMS ioctls had some somewhat inconsistent settings
regarding whether mastership was required. For example, GETRESOURCES
did not require master, but GETPLANERESOURCES, GETPROPERTY, etc. did.
At least for debugging, it is nice to be able to use modetest to dump
property values while another process is master, and there seems to
be no harm in allowing read-only access to the KMS state to other
processes.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For drivers that can support rotated scanout, the extra parameter
checking in drm-core, while nice, tends to get confused. To solve
this drivers can set the crtc or plane invert_dimensions field so
that the dimension checking takes into account the rotation that
the driver is performing.
v1: original
v2: remove invert_dimensions from plane, at Ville's suggestion.
Userspace can give rotated src coordinates, so invert_dimensions
is not required for planes.
Signed-off-by: Rob Clark <rob@ti.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This simplifies drm fb lifetime, and if the crtc/plane needs to hold
a ref to the fb when disabling a pipe until the next vblank, this
avoids the need to make disabling an overlay synchronous. This is a
problem that shows up when userspace is using a drm plane to
implement a hw cursor.. making overlay disable synchronous causes
a performance problem when x11 is rapidly enabling/disabling the
hw cursor. But not making it synchronous opens up a race condition
for crashing if userspace turns around and immediately deletes the
fb. Refcnt'ing the fb makes it possible to solve this problem.
v1: original
v2: add drm_framebuffer_remove() which is called in all paths where
fb->funcs->destroy() was directly called before. This cleans
up the CRTCs/planes that the fb was attached to. You should
only directly use drm_framebuffer_unreference() if you are also
using drm_framebuffer_reference() to keep a ref to the fb.
v3: add comment explaining the fb refcount
v4: remove duplicate 'list_del(&fb->filp_head)'
[airlied: v4.1: fix local rejection]
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Remove useless kfree() and clean up code related to the removal.
The semantic patch that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
position p1,p2;
expression x;
@@
if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; }
@unchanged exists@
position r.p1,r.p2;
expression e <= r.x,x,e1;
iterator I;
statement S;
@@
if (x@p1 == NULL) { ... when != I(x,...) S
when != e = e1
when != e += e1
when != e -= e1
when != ++e
when != --e
when != e++
when != e--
when != &e
kfree@p2(x); ... return ...; }
@ok depends on unchanged exists@
position any r.p1;
position r.p2;
expression x;
@@
... when != true x@p1 == NULL
kfree@p2(x);
@depends on !ok && unchanged@
position r.p2;
expression x;
@@
*kfree@p2(x);
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes the following sparse warnings:
drivers/gpu/drm/udl/udl_fb.c:360:6: warning:
symbol 'udl_crtc_fb_gamma_set' was not declared. Should it be static?
drivers/gpu/drm/udl/udl_fb.c:365:6: warning:
symbol 'udl_crtc_fb_gamma_get' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes the following sparse warning:
drivers/gpu/drm/udl/udl_modeset.c:394:5: warning:
symbol 'udl_crtc_init' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes the following sparse warning:
drivers/gpu/drm/udl/udl_encoder.c:19:6: warning:
symbol 'udl_enc_destroy' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes the following sparse warnings:
drivers/gpu/drm/udl/udl_transfer.c:129:50:
drivers/gpu/drm/udl/udl_transfer.c:130:50:
drivers/gpu/drm/udl/udl_transfer.c:131:45:
drivers/gpu/drm/udl/udl_transfer.c:132:61:
warning: Using plain integer as NULL pointer
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Driver used to print "default" as the state type regardless
of whether it is the default state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MIP_ADDRESS should point to the resolved FMASK for an MSAA texture.
Setting MIP_ADDRESS to 0 means the FMASK pointer is invalid (the GPU
won't read the memory then).
The userspace has to set MIP_ADDRESS to 0 and *not* emit any relocation
for it.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
PDE/PTE update code uses CP ring for memory writes.
All page table entries are preallocated for now in alloc_pt().
It is made as whole because it's hard to divide it to several patches
that compile and doesn't break anything being applied separately.
Tested on cayman card.
v2: rebased on top of "refactor set_page chipset interface v3",
code cleanups
v3: switched offsets calc macros to inline funcs where possible,
remove pd_addr from radeon_vm, switched RADEON_BLOCK_SIZE define,
to 9 (and PTE_COUNT to 1 << BLOCK_SIZE)
v4 (ck): move "incr" documentation to previous patch, cleanup and
document RADEON_VM_* constants, change commit message to
our usual format, simplify patch allot by removing
everything current not necessary, disable SI workaround.
v5: (agd5f): Fix typo in tables_size calculation in
radeon_vm_alloc_pt(). Second line should have been
'+=' rather than '='.
v6: fix npdes calculation. In scenario when pfns to be mapped overlap
two PDE spans:
+-----------+-------------+
| PDE span | PDE span |
+-----------+----+--------+
| |
+---------+
| pfns |
+---------+
the following npdes calculation gives incorrect result:
npdes = (nptes >> RADEON_VM_BLOCK_SIZE) + 1;
For the case above picture it should give npdes = 2, but gives one.
This patch corrects it by rounding last pfn up to 512 border,
first - down to 512 border and then subtracting and dividing by 512.
v7: Make npde calculation clearer, fix ndw calculation.
v8: (agd5f): reserve enough for 2 full VM PTs, add some
additional comments.
v9: fix typo in npde calculation
Signed-off-by: Dmitry Cherkasov <Dmitrii.Cherkasov@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup the interface in preparation for hierarchical page tables.
v2: add incr parameter to set_page for simple scattered PTs uptates
added PDE-specific flags to r600_flags and radeon_drm.h
removed superfluous value masking with 0xffffffff
v3: removed superfluous bo_va->valid checking
changed R600_PTE_VALID to R600_ENTRY_VALID to handle PDE too
v4 (ck): fix indention style, rework and fix typos in commit message,
add documentation for incr parameter, also use incr
parameter for system pages
v5 (agd5f): use upper_32_bits() and minor white space fixes
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Dmitry Cherkassov <Dmitrii.Cherkasov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Restructure the code to jump out via labels instead of directly returning
early. Also make error reporting consistent across all hardware generations.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Simon Kitching <skitching@vonos.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to bail if we can't support the requested
setup from a PPLL perspective. Prevents broken setups
from being attempted.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the current KMS API sets the mode independantly on
each crtc, we may end up with resource conflicts. The PLL
allocation is one of those cases. In the following example
we have 3 crtcs in use driving 2 DVI connectors and 1 DP
connector. On the initial kernel modeset for fbdev, the
display topology ends up as follows:
crtc0 -> DP-0
crtc1 -> DVI-0
crtc2 -> DVI-1
Because this is the first modeset, all of the PLLs are
available as none have been assigned. So we end up with
the following:
crtc0 uses DCPLL
crtc1 uses PPLL2
crtc2 uses PPLL1
When X starts, it assigns a different topology:
crtc0 -> DVI-0
crtc1 -> DP-0
crtc2 -> DVI-1
However, since the KMS API is per crtc, we set the mode on each
crtc independantly. When it comes time to set the mode on crtc0,
the topology for crtc1 and crtc2 are still intact. crtc1 and
crtc2 are already assigned PPLL2 and PPLL1 so when it comes time
to set the mode on crtc0, crtc1 and crtc2 have not been torn down
yet, so there appears to be no PLLs available. In reality, we
are reconfiguring the entire display topology, however, since
each crtc is handled independantly, we don't know that in the
driver at each crtc mode set time.
This patch checks to see if the same connector is being driven by
another crtc, and if so, uses the PLL already associated with it.
v2: store connector in the radeon crtc struct, simplify checking.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Finishes commit 02d719562e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 9 16:44:54 2012 +0200
drm/i915: properly guard ilk ips state
The core functions were annotated with their locking requirements, but
we overlooked that they were exported, without any control over the
locking, to debugfs. So in order to enable debugfs to read the registers
without triggering sanity checks, we change the exported entry points to
properly take the required locks before calling the core routines.
Reported-by: yangguang <guang.a.yang@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55304
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... even if the actual infoframe is smaller than the maximum possible
size.
If we don't write all the 32 DIP data bytes the InfoFrame ECC may not
be correctly calculated in some cases (e.g., when changing the port),
and this will lead to black screens on HDMI monitors. The ECC value is
generated by the hardware.
I don't see how this should break anything since we're writing 0 and
that should be the correct value, so this patch should be safe.
Notice that on IVB and older we actually have 64 bytes available for
VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the
others are either read-only ECC values or marked as "reserved". On HSW
we only have 32 bytes, and the ECC value is stored on its own separate
read-only register. See BSpec.
This patch fixes bug #46761, which is marked as a regression
introduced by commit 4e89ee174b:
drm/i915: set the DIP port on ibx_write_infoframe
Before commit 4e89 we were just failing to send AVI infoframes when we
needed to change the port, which can lead to black screens in some
cases. After commit 4e89 we started sending infoframes, but with a
possibly wrong ECC value. After this patch I hope we start sending
correct infoframes.
Version 2:
- Improve commit message
- Try to make the code more clear
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Manual backmerge of -rc7 to resolve a silent conflict leading to
compile failure in drivers/gpu/drm/i915/intel_hdmi.c.
This is due to the bugfix in -rc7:
commit b98b601672
Author: Wang Xingchao <xingchao.wang@intel.com>
Date: Thu Sep 13 07:43:22 2012 +0800
drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
Since this code moved around a lot in -next git put that snippet at
the wrong spot. I've tried to fix this by making the conflict explicit
by merging a version for next with:
commit 3cce574f01
Author: Wang Xingchao <xingchao.wang@intel.com>
Date: Thu Sep 13 11:19:00 2012 +0800
drm/i915: HDMI - Clear Audio Enable bit for Hot Plug unconditionally
But that failed to solve the entire problem. To avoid pushing out
further -nightly branch to our QA where this is broken, do the
backmerge and manually add the stuff git adds to -next from the patch
in -fixes.
Note that this doesn't show up in git's merge diff (and hence is also
not handled by git rerere), which adds to the reasons why I'd like to
fix this with a verbose backmerge. The git merge diff only shows a
bunch of trivial conflicts of the "code changed in lines next to each
another" kind.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This should never happen, but the silent "return" makes me wonder
every time I try to debug InfoFrame bugs, so promote this to BUG() to
make sure people will complain if we ever break this.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel writes:
Essentially just flush my -fixes queue before I head off to xdc.
- gen2 regression fixer, we've enabled the lvds stuff too late. Not
causing any known issues, but this restores the sequence before a
refactor that landed in 3.5, and lvds is a fickle beast. And seriously,
who runs gen2 still ...
- downgrade a BUG to a WARN - we haven't root-caused/fixed the underlying
issue yet, but this should help bug reporters quite a bit.
- properly disable hdmi audio - we've lost track of this, which resulted
in the alsa driver again losing track of the unplug event.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
drm/i915: Reduce a pin-leak BUG into a WARN
drm/i915: enable lvds pin pairs before dpll on gen2
This fixes the gpio reset problem so the Retina MBP works, but avoids
breaking the Dell systems. Ben will work on a better solution for 3.7.
Tested by me on retina MBP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixes a resume regression on pre-r6xx asics.
* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Prevent leak of scratch register on resume from suspend
Compare the adjusted clock as well as the crtc mode
clock. This handles cases where the driver adjusts
the clock for specific special cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need the calculate the pixel clock before allocating a PPLL
in order to insure the clocks really match.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If several non-DP displays use the same pixel clock
we can use the same PPLL for all of them. If all
relevant displays have the same pixel clock, this
allows the driver to:
- use fewer PPLLs which saves power
- support more than two non-DP displays on DCE4+
The current drm modesetting infrastructure doesn't
really provide a good framework for validating combinations
that work or won't work, so it's possible you could go from
a working configuration to a non-working one by changing the
mode a one of the displays. However, there this is better
than what was there before.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DP we can use the same PPLL for all active DP
encoders. Take advantage of that to prevent cases
where we may end up sharing a PPLL between DP and
non-DP which won't work. Also clean up the code
a bit.
v2: - fix missing pll_id assignment in crtc init
v3: - fix DP PPLL check
- document functions
- break in main encoder search loop after matching.
no need to keep checking additional encoders.
v4: - same as v3, but re-apply to drm-next as the corner
cases are fixed properly in subsequent patches.
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=54471
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MiscInfo field should be programmed with the crtc id
rather than the pll id. However, at this point the
two are the same for chips with this version of the table.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the proper struct in the union. That field
has the same offset in every struct, so no functional
change.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roughly based on how nouveau is handling it. Instead of
adding the bo_va when the address is set add the bo_va
when the handle is opened, but set the address to zero
until userspace tells us where to place it.
This fixes another bunch of problems with glamor.
v2: agd5f: fix build after dropping patch 7/8.
Signed-off-by: Christian König <deathsimple@vodafone.de>
The no_wait param isn't used anywhere, and actually isn't
very usefull at all.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
It doesn't really belong into the object functions,
also rename it to avoid collisions with struct radeon_bo_va.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
