The syscall_trace on ARM takes a `why' parameter to indicate whether or
not we are entering or exiting a system call. This can be confusing for
people looking at the code since (a) it conflicts with the why register
alias in the entry assembly code and (b) it is not immediately clear
what it represents.
This patch splits up the syscall_trace function into separate wrappers
for syscall entry and exit, allowing the low-level syscall handling
code to branch to the appropriate function.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When auditing system calls on ARM, the audit code is called before
notifying the parent process in the case that the current task is being
ptraced. At this point, the parent (debugger) may choose to change the
system call being issued via the SET_SYSCALL ptrace request, causing
the wrong system call to be reported to the audit tools.
This patch moves the audit calls after the ptrace SIGTRAP handling code
in the syscall tracing implementation.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ret_from_fork is setup for a freshly spawned child task via copy_thread,
called from copy_process. The latter function clears TIF_SYSCALL_TRACE
and also resets the child task's audit_context to NULL, meaning that
there is little point invoking the system call tracing routines.
Furthermore, getting hold of the syscall number is a complete pain and
it looks like the current code doesn't even bother.
This patch removes the syscall tracing checks from ret_from_fork.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch allows a timer-based delay implementation to be selected by
switching the delay routines over to use get_cycles, which is
implemented in terms of read_current_timer. This further allows us to
skip the loop calibration and have a consistent delay function in the
face of core frequency scaling.
To avoid the pain of dealing with memory-mapped counters, this
implementation uses the co-processor interface to the architected timers
when they are available. The previous loop-based implementation is
kept around for CPUs without the architected timers and we retain both
the maximum delay (2ms) and the corresponding conversion factors for
determining the number of loops required for a given interval. Since the
indirection of the timer routines will only work when called from C,
the sa1100 sleep routines are modified to branch to the loop-based delay
functions directly.
Tested-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch implements read_current_timer using the architected timers
when they are selected via CONFIG_ARM_ARCH_TIMER. If they are detected
not to be usable at runtime, we return -ENXIO to the caller.
Furthermore, if read_current_timer is exported then we can implement
get_cycles in terms of it for use as both an entropy source and for
implementing __udelay and friends.
Tested-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
DCACHE_WORD_ACCESS uses the word-at-a-time API for optimised string
comparisons in the vfs layer.
This patch implements support for load_unaligned_zeropad for ARM CPUs
with native support for unaligned memory accesses (v6+) when running
little-endian.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch implements the word-at-a-time interface for ARM using the
same algorithm as x86. We use the fls macro from ARMv5 onwards, where
we have a clz instruction available which saves us a mov instruction
when targetting Thumb-2. For older CPUs, we use the magic 0x0ff0001
constant. Big-endian configurations make use of the implementation from
asm-generic.
With this implemented, we can replace our byte-at-a-time strnlen_user
and strncpy_from_user functions with the optimised generic versions.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In order to provide PMU name strings compatible with the OProfile
user ABI, an enumeration of all PMUs is currently used by perf to
identify each PMU uniquely. Unfortunately, this does not scale well
in the presence of multiple PMUs and creates a single, global namespace
across all PMUs in the system.
This patch removes the enumeration and instead uses the name string
for the PMU to map onto the OProfile variant. perf_pmu_name is
implemented for CPU PMUs, which is all that OProfile cares about anyway.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The ARM arch_{read,write}_trylock implementations include unused
backwards branch labels, since we don't retry the locking operation
if the exclusive store fails.
This patch removes the labels.
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ticket spinlocks ensure locking fairness by introducing a FIFO-like
nature to the granting of lock acquisitions and also reducing the
thundering herd effect when spinning on a lock by allowing the cacheline
to remain in a shared state amongst the waiting CPUs. This is especially
important on systems where memory-access times are not necessarily
uniform when accessing the lock structure (for example, on a
multi-cluster platform where the lock is allocated into L1 when a CPU
releases it).
This patch implements the ticket spinlock algorithm for ARM, replacing
the simpler implementation for ARMv6+ processors.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch introduces a new Kconfig option which, when enabled, causes
the kernel to write the PID of the current task into the PROCID field
of the CONTEXTIDR on context switch. This is useful when analysing
hardware trace, since writes to this register can be configured to emit
an event into the trace stream.
The thread notifier for writing the PID is deliberately kept separate
from the ASID-writing code so that we can support newer processors using
LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is
updated to perform a read-modify-write sequence to ensure that we don't
clobber the PID on CPUs using the classic 2-level page tables.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When a CPU is shutdown its architected timer comparators registers are
lost. Within CPU idle, before processors enter shutdown they enter
clock events broadcast mode through the
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, cpuid);
function where the local timers are emulated by a global always-on timer.
On CPU resume, the per-CPU tick device normal mode is restored by exiting
broadcast mode through
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, cpuid);
In order for this mechanism to function, architected timers should add to
their feature C3STOP, which means that they are not able to function when the
CPU is in off-mode.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 64ac24e738 ("Generic semaphore
implementation") removed the last include of this header. Apparently it
was just an oversight to keep this header. It can safely be removed now.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Let's map the initial RAM up to the end of the kernel .bss instead of
the strict kernel image area. This simplifies the code as the kernel
image only needs to be handled specially in the XIP case. That covers
the legacy ATAG location as well.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch allows the ATAG_CMDLINE provided by the bootloader to be
concatenated to the bootargs property of the device tree.
This is useful to merge static values defined in the device tree
with the boot loader's (possibly) more dynamic values, such as
startup reasons and more.
The bootloader should use the device tree to pass those values to
the kernel, but that's not always simple (old bootloader or very
small one).
The behaviour is the same as the one introduced by Victor Boivie in
4394c12442 by extending the CONFIG_CMDLINE.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The vectors page has been traditionally mapped as WT on UP systems but
this creates a mismatched alias with the directly mapped RAM that is
using WB attributes. On newer processors like Cortex-A15 this has
implications on the data/instructions coherency at the point of
unification (usually L2).
This patch removes such restriction.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Robustify ARM's die() handling with improvements from x86:
- Fix for a deadlock (before panic in the case of panic_on_oops) if we
oops under a spinlock which is also used from interrupt handler,
since the old code was unconditionally enabling interrupts.
- Usage of arch spinlock so lockdep etc doesn't get involved while
we're trying to dump out oopses.
- Deadlock prevention in the unlikely event that die() recurses.
The changes all touch the same few lines of code, so they're done
together in one patch.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Make the OS timer registers have IOMEM like properities so they can
be passed to readl_relaxed/writel_relaxed() et.al. rather than being
straight volatile dereferences. Add linux/io.h includes where
required.
linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c,
arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c
drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c
from Arnd.
This fixes these warnings:
arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init':
arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type
arch/arm/mach-pxa/time.c: In function 'pxa_timer_init':
arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
While running hotplug tests I ran into this RCU splat
===============================
[ INFO: suspicious RCU usage. ]
3.4.0 #3275 Tainted: G W
-------------------------------
include/linux/rcupdate.h:729 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
4 locks held by swapper/2/0:
#0: ((cpu_died).wait.lock){......}, at: [<c00ab128>] complete+0x1c/0x5c
#1: (&p->pi_lock){-.-.-.}, at: [<c00b275c>] try_to_wake_up+0x2c/0x388
#2: (&rq->lock){-.-.-.}, at: [<c00b2860>] try_to_wake_up+0x130/0x388
#3: (rcu_read_lock){.+.+..}, at: [<c00abe5c>] cpuacct_charge+0x28/0x1f4
stack backtrace:
[<c001521c>] (unwind_backtrace+0x0/0x12c) from [<c00abec8>] (cpuacct_charge+0x94/0x1f4)
[<c00abec8>] (cpuacct_charge+0x94/0x1f4) from [<c00b395c>] (update_curr+0x24c/0x2c8)
[<c00b395c>] (update_curr+0x24c/0x2c8) from [<c00b59c4>] (enqueue_task_fair+0x50/0x194)
[<c00b59c4>] (enqueue_task_fair+0x50/0x194) from [<c00afea4>] (enqueue_task+0x30/0x34)
[<c00afea4>] (enqueue_task+0x30/0x34) from [<c00b0908>] (ttwu_activate+0x14/0x38)
[<c00b0908>] (ttwu_activate+0x14/0x38) from [<c00b28a8>] (try_to_wake_up+0x178/0x388)
[<c00b28a8>] (try_to_wake_up+0x178/0x388) from [<c00a82a0>] (__wake_up_common+0x34/0x78)
[<c00a82a0>] (__wake_up_common+0x34/0x78) from [<c00ab154>] (complete+0x48/0x5c)
[<c00ab154>] (complete+0x48/0x5c) from [<c07db7cc>] (cpu_die+0x2c/0x58)
[<c07db7cc>] (cpu_die+0x2c/0x58) from [<c000f954>] (cpu_idle+0x64/0xfc)
[<c000f954>] (cpu_idle+0x64/0xfc) from [<80208160>] (0x80208160)
When a cpu is marked offline during its idle thread it calls
cpu_die() during an RCU idle period. cpu_die() calls complete()
to notify the killing process that the cpu has died. complete()
calls into the scheduler code and eventually grabs an RCU read
lock in cpuacct_charge().
Mark complete() as RCU_NONIDLE so that RCU pays attention to this
CPU for the duration of the complete() function even though it's
in idle.
Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OMAP5 has 8 GPIO banks so that there are 32x8 = 256 GPIOs.
In order for the gpiolib to detect and initialize these
additional GPIOs and other TWL GPIOs, ARCH_NR_GPIO is set
to 512 instead of present 256.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Cousson, Benoit <b-cousson@ti.com>
Reported-by: Govindraj.R <govindraj.raja@ti.com>
Tested-by: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Move the irq_match arrays and the irq init functions of OMAP 2,3
and 4 based boards out of board-generic.c file and also rename the
irq init function to match the interrupt controller present in
the SOCs.
This is a preparatory patch to add the OMAP5 evm board's irq init
support with device tree.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Add OMAP5 SMP boot support using OMAP4 SMP code. The relevant code paths
are runtime checked using cpu id
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
OMAP4 and OMAP5 share same WakeupGen IP with below few udpates on OMAP5.
- Additional 32 interrupt support is added w.r.t OMAP4 design.
- The AUX CORE boot registers are now made accessible from non-secure SW.
- SAR offset are changed and PTMSYNC* registers are removed from SAR.
Patch updates the WakeupGen code accordingly.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The l3 interconnect ip is same for OMAP4 and OMAP5.
So reuse the l3 error handler error code for OMAP5
as well. Also a few targets has been newly added for
OMAP5. So updating the driver for that here.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
GPMC module is the same as in OMAP4.
Just update the base address and irq number.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Adding the Initialisaton for clocksource and clockevent device
on OMAP5 Socs.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP
architecture. It's a dual core SOC with GIC used for interrupt
handling and with an integrated L2 cache controller.
OMAP5432 is another variant of OMAP5430, with a
memory controller supporting DDR3 and SATA.
Patch includes:
- The machine specific headers and sources updates.
- Platform header updates.
- Minimum initialisation support for serial.
- IO table init
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Adding the OMAP5 ES1.0, 2.0 and OMAP5432 cpu revision
detection support.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
OMAP socs has a legacy and a highlander version of the
32k sync counter IP. The register offsets vary between the
highlander and the legacy scheme. So use the 'SCHEME'
bits(30-31) of the revision register to distinguish between
the two versions and choose the CR register offset accordingly.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
omap_secure_ram_reserve_memblock is stubbed for OMAP1,2 only builds using a
ifdef check. But this results in adding CONFIG_ARCH_OMAPxx checks for
future socs that use the real function. So move this to common.c file and
call it __weak.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
The 4430 and 4460 version of PandaBoard mostly the same with
exception at least in audio setup.
Use the omap4-panda.dts file as a base and only override the differences
between the revisions.
For audio it is the name of the sound card and the routing information.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
PandaBoard uses twl6040 connected via McPDM for audio.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On OMAP4 SDP the audio setup includes the twl6040 codec and digital
microphones.
Since OMAP4 SDP is a reference board it has all possible audio interfaces
connected. This information is passed via the ti,audio-routing
property.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The twl6040 provides the audio and vibra support on OMAP4 SDP boards.
It is connected to i2c1 bus with 0x4b address.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
DMIC IP is used to connect up to 6 digital microphones directly to OMAP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
McPDM is used on OMAP4 based boards to communicate with an external audio
codec (twl6040).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Our emulation should be complete enough that we can emulate guests
while they are in big real mode, or in a mode transition that is not
virtualizable without unrestricted guest support.
Signed-off-by: Avi Kivity <avi@redhat.com>
Guest software doesn't actually depend on it, but vmx will refuse us
entry if we don't. Set the bit in both the cached segment and memory,
just to be nice.
Signed-off-by: Avi Kivity <avi@redhat.com>
