The Libre Computer ALL-H3-CC H5 is one of the few boards that can have
its eMMC run at HS-DDR speed mode. Mark it as such.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
On these A64 devices, the DC input jacks are wired to the ACIN pins of
the PMIC, which is represented by the AC power supply. With the
exception of the Nanopi A64, all devices include LiPo batteries or have
connectors for them, which are represented by the battery power supply.
Enable these power supplies in the device tree.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Since commit b4935e3a3c ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.
To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.
Fixes: b4935e3a3c ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Ensure the PCIe endpoint card reset that is toggled by the PCIe
controller itself is muxed correctly on the EspressoBin.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
On Marvell Armada 3700 SoCs there are two USB2 UTMI PHYs. They are
both very similar but only one has OTG/charging capabilities.
Because there are USB host registers and PHY registers mixed in a
single area, a system controller is also created and referenced from
both the USB host node and the PHY node.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The specification splits the USB2 memory region into three sections:
1/ 0xD005E000-0xD005EFFF: USB2 Host Controller Registers
2/ 0xD005F000-0xD005F7FF: USB2 UTMI PHY Registers
3/ 0xD005F800-0xD005FFFF: USB2 Host Miscellaneous Registers
Section 1/ belongs to the USB2 node but section 2/ belongs to the UTMI
PHY node. Section 3/ can be accessed by both the USB controller and
the PHY because of the miscaellaneous nature of the registers inside
so a specific node will be created to cover the area and a handle to
it will be added in both the USB controller and the PHY node.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fix the SATA IP memory area which is only 0x178 bytes long (from
Marvell A3700 specification). Actually, starting from the offset
0xe0178, there is an area dedicated to the COMPHY driver.
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
When building randconfigs, one of the failures is:
ld: arch/x86/boot/compressed/kaslr.o: in function `choose_random_location':
kaslr.c:(.text+0xbf7): undefined reference to `count_immovable_mem_regions'
ld: kaslr.c:(.text+0xcbe): undefined reference to `immovable_mem'
make[2]: *** [arch/x86/boot/compressed/vmlinux] Error 1
because CONFIG_ACPI is not enabled in this particular .config but
CONFIG_MEMORY_HOTREMOVE is and count_immovable_mem_regions() is
unresolvable because it is defined in compressed/acpi.c which is the
compilation unit that depends on CONFIG_ACPI.
Add CONFIG_ACPI to the explicit dependencies for MEMORY_HOTREMOVE.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20190205131033.9564-1-bp@alien8.de
ac09c5f43c ("x86/boot: Build the command line parsing code unconditionally")
enabled building the command line parsing code unconditionally but it
forgot to remove the respective ifdeffery around the prototypes in the
misc.h header, leading to
arch/x86/boot/compressed/acpi.c: In function ‘get_acpi_rsdp’:
arch/x86/boot/compressed/acpi.c:37:8: warning: implicit declaration of function \
‘cmdline_find_option’ [-Wimplicit-function-declaration]
ret = cmdline_find_option("acpi_rsdp", val, MAX_ADDR_LEN);
^~~~~~~~~~~~~~~~~~~
for configs where neither CONFIG_EARLY_PRINTK nor CONFIG_RANDOMIZE_BASE
was defined.
Drop the ifdeffery in the header too.
Fixes: ac09c5f43c ("x86/boot: Build the command line parsing code unconditionally")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/5c51daf0.83pQEkvDZILqoSYW%lkp@intel.com
Link: https://lkml.kernel.org/r/20190205131352.GA27396@zn.tnic
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.
No ill-effect in the current code base but lets fix it for correctness.
At the same time tidy the assert for readability and robustness.
v2:
* One check per assert. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
When an NMI is raised while interrupts where disabled, the IRQ tracing
already is in the correct state (i.e. hardirqs_off) and should be left
as such when returning to the interrupted context.
Check whether PMR was masking interrupts when the NMI was raised and
skip IRQ tracing if necessary.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Handling of an NMI should not set any TIF flags. For NMIs received from
EL0 the current exit path is safe to use.
However, an NMI received at EL1 could have interrupted some task context
that has set the TIF_NEED_RESCHED flag. Preempting a task should not
happen as a result of an NMI.
Skip preemption after handling an NMI from EL1.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The values non secure EL1 needs to use for PMR and RPR registers depends on
the value of SCR_EL3.FIQ.
The values non secure EL1 sees from the distributor and redistributor
depend on whether security is enabled for the GIC or not.
To avoid having to deal with two sets of values for PMR
masking/unmasking, only enable pseudo-NMIs when GIC has non-secure view
of priorities.
Also, add firmware requirements related to SCR_EL3.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently alternatives are applied very late in the boot process (and
a long time after we enable scheduling). Some alternative sequences,
such as those that alter the way CPU context is stored, must be applied
much earlier in the boot sequence.
Introduce apply_boot_alternatives() to allow some alternatives to be
applied immediately after we detect the CPU features of the boot CPU.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[julien.thierry@arm.com: rename to fit new cpufeature framework better,
apply BOOT_SCOPE feature early in boot]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for the application of alternatives at different points
during the boot process, provide the possibility to check whether
alternatives for a feature of interest was already applied instead of
having a global boolean for all alternatives.
Make VHE enablement code check for the VHE feature instead of considering
all alternatives.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: Christoffer Dall <Christoffer.Dall@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The addition of PMR should not bypass the semantics of daifflags.
When DA_F are set, I bit is also set as no interrupts (even of higher
priority) is allowed.
When DA_F are cleared, I bit is cleared and interrupt enabling/disabling
goes through ICC_PMR_EL1.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Interrupts masked by ICC_PMR_EL1 will not be signaled to the CPU. This
means that hypervisor will not receive masked interrupts while running a
guest.
We need to make sure that all maskable interrupts are masked from the
time we call local_irq_disable() in the main run loop, and remain so
until we call local_irq_enable() after returning from the guest, and we
need to ensure that we see no interrupts at all (including pseudo-NMIs)
in the middle of the VM world-switch, while at the same time we need to
ensure we exit the guest when there are interrupts for the host.
We can accomplish this with pseudo-NMIs enabled by:
(1) local_irq_disable: set the priority mask
(2) enter guest: set PSTATE.I
(3) clear the priority mask
(4) eret to guest
(5) exit guest: set the priotiy mask
clear PSTATE.I (and restore other host PSTATE bits)
(6) local_irq_enable: clear the priority mask.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
CPU does not received signals for interrupts with a priority masked by
ICC_PMR_EL1. This means the CPU might not come back from a WFI
instruction.
Make sure ICC_PMR_EL1 does not mask interrupts when doing a WFI.
Since the logic of cpu_do_idle is becoming a bit more complex than just
two instructions, lets turn it from ASM to C.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to replace PSR.I interrupt disabling/enabling with ICC_PMR_EL1
interrupt masking, ICC_PMR_EL1 needs to be saved/restored when
taking/returning from an exception. This mimics the way hardware saves
and restores PSR.I bit in spsr_el1 for exceptions and ERET.
Add PMR to the registers to save in the pt_regs struct upon kernel entry,
and restore it before ERET. Also, initialize it to a sane value when
creating new tasks.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
