I tried __GFP_NORETRY in the belief that __GFP_RECLAIM was effective. It
struggles with handling reclaim of our dirty buffers and relies on
reclaim via kswapd. As a result, a single pass of direct reclaim is
unreliable when i915 occupies the majority of available memory, and the
only means of effectively waiting on kswapd to amke progress is by not
setting the __GFP_NORETRY flag and lopping. That leaves us with the
dilemma of invoking the oomkiller instead of propagating the allocation
failure back to userspace where it can be handled more gracefully (one
hopes). In the future we may have __GFP_MAYFAIL to allow repeats up until
we genuinely run out of memory and the oomkiller would have been invoked.
Until then, let the oomkiller wreck havoc.
v2: Stop playing with side-effects of gfp flags and await __GFP_MAYFAIL
v3: Update comments that direct reclaim only appears to be ignoring our
dirty buffers!
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Testcase: igt/gem_tiled_swapping
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit eaf4180155)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than
incur the oom for gfx allocations") made the bold decision to try and
avoid the oomkiller by reporting -ENOMEM to userspace if our allocation
failed after attempting to free enough buffer objects. In short, it
appears we were giving up too easily (even before we start wondering if
one pass of reclaim is as strong as we would like). Part of the problem
is that if we only shrink just enough pages for our expected allocation,
the likelihood of those pages becoming available to us is less than 100%
To counter-act that we ask for twice the number of pages to be made
available. Furthermore, we allow the shrinker to pull pages from the
active list in later passes.
v2: Be a little more cautious in paging out gfx buffers, and leave that
to a more balanced approach from shrink_slab(). Important when combined
with "drm/i915: Start writeback from the shrinker" as anything shrunk is
immediately swapped out and so should be more conservative.
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-1-chris@chris-wilson.co.uk
(cherry picked from commit 4846bf0ca8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drivers/gpu/drm/i915/intel_engine_cs.c: In function ‘intel_engine_is_idle’:
drivers/gpu/drm/i915/intel_engine_cs.c:1103:27: error: unused variable ‘dev_priv’ [-Werror=unused-variable]
struct drm_i915_private *dev_priv = engine->i915;
^~~~~~~~
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The scanline counter is bonkers on VLV/CHV DSI. The scanline counter
increment is not lined up with the start of vblank like it is on
every other platform and output type. This causes problems for
both the vblank timestamping and atomic update vblank evasion.
On my FFRD8 machine at least, the scanline counter increment
happens about 1/3 of a scanline ahead of the start of vblank (which
is where all register latching happens still). That means we can't
trust the scanline counter to tell us whether we're in vblank or not
while we're on that particular line. In order to keep vblank
timestamping in working condition when called from the vblank irq,
we'll leave scanline_offset at one, which means that the entire
line containing the start of vblank is considered to be inside
the vblank.
For the vblank evasion we'll need to consider that entire line
to be bad, since we can't tell whether the registers already
got latched or not. And we can't actually use the start of vblank
interrupt to get us past that line as the interrupt would fire
too soon, and then we'd up waiting for the next start of vblank
instead. One way around that would using the frame start
interrupt instead since that wouldn't fire until the next
scanline, but that would require some bigger changes in the
interrupt code. So for simplicity we'll just poll until we get
past the bad line.
v2: Adjust the comments a bit
Cc: stable@vger.kernel.org
Cc: Jonas Aaberg <cja@gmx.net>
Tested-by: Jonas Aaberg <cja@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit ec1b4ee283)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since
commit bac2a909a0
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Jan 21 02:17:42 2015 +0100
PCI / PM: Avoid resuming PCI devices during system suspend
PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:
- The i915 driver has system suspend specific steps that it needs to
run, that bring the device to a different state than its runtime
suspended state.
- The HDA driver's suspend handler requires power that it will request
from the i915 driver's power domain handler. This in turn requires the
i915 driver to runtime resume itself, but this won't be possible if the
suspend complete optimization is in effect: in this case the i915
runtime PM is disabled and trying to get an RPM reference returns
-EACCESS.
Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.
Regardless of the above commit the optimization stayed disabled for DRM
devices until
commit d14d2a8453
Author: Lukas Wunner <lukas@wunner.de>
Date: Wed Jun 8 12:49:29 2016 +0200
drm: Remove dev_pm_ops from drm_class
so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either. So if this backlight
device got registered the bug stayed hidden.
Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.
The first WARN triggered by the problem:
[ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746448] pm_runtime_get_sync() failed: -13
[ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul
snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_
numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
[ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1
[ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
[ 6250.746521] Workqueue: events_unbound async_run_entry_fn
[ 6250.746525] Call Trace:
[ 6250.746530] dump_stack+0x67/0x92
[ 6250.746536] __warn+0xc6/0xe0
[ 6250.746542] ? pci_restore_standard_config+0x40/0x40
[ 6250.746546] warn_slowpath_fmt+0x46/0x50
[ 6250.746553] ? __pm_runtime_resume+0x56/0x80
[ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746610] intel_display_power_get+0x1b/0x40 [i915]
[ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915]
[ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core]
[ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel]
[ 6250.746667] pci_pm_runtime_resume+0x76/0xa0
[ 6250.746672] __rpm_callback+0xb4/0x1f0
[ 6250.746677] ? pci_restore_standard_config+0x40/0x40
[ 6250.746682] rpm_callback+0x1f/0x80
[ 6250.746686] ? pci_restore_standard_config+0x40/0x40
[ 6250.746690] rpm_resume+0x4ba/0x740
[ 6250.746698] __pm_runtime_resume+0x49/0x80
[ 6250.746703] pci_pm_suspend+0x57/0x140
[ 6250.746709] dpm_run_callback+0x6f/0x330
[ 6250.746713] ? pci_pm_freeze+0xe0/0xe0
[ 6250.746718] __device_suspend+0xf9/0x370
[ 6250.746724] ? dpm_watchdog_set+0x60/0x60
[ 6250.746730] async_suspend+0x1a/0x90
[ 6250.746735] async_run_entry_fn+0x34/0x160
[ 6250.746741] process_one_work+0x1f2/0x6d0
[ 6250.746749] worker_thread+0x49/0x4a0
[ 6250.746755] kthread+0x107/0x140
[ 6250.746759] ? process_one_work+0x6d0/0x6d0
[ 6250.746763] ? kthread_create_on_node+0x40/0x40
[ 6250.746768] ret_from_fork+0x2e/0x40
[ 6250.746778] ---[ end trace 102a62fd2160f5e6 ]---
v2:
- Use the new pci_dev->needs_resume flag, to avoid any overhead during
the ->pm_prepare hook. (Rafael)
v3:
- Update commit message to reference the actual regressing commit.
(Lukas)
v4:
- Rebase on v4 of patch 1/2.
Fixes: d14d2a8453 ("drm: Remove dev_pm_ops from drm_class")
References: https://bugs.freedesktop.org/show_bug.cgi?id=100378
References: https://bugs.freedesktop.org/show_bug.cgi?id=100770
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com
(cherry picked from commit adfdf85d79)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
BXT has a H/W issue with IOMMU which can lead to system hangs when
Aperture accesses are queued within the GAM behind GTT Accesses.
This patch avoids the condition by wrapping all GTT updates in stop_machine
and using a flushing read prior to restarting the machine.
The stop_machine guarantees no new Aperture accesses can begin while
the PTE writes are being emmitted. The flushing read ensures that
any following Aperture accesses cannot begin until the PTE writes
have been cleared out of the GAM's fifo.
Only FOLLOWING Aperture accesses need to be separated from in flight
PTE updates. PTE Writes may follow tightly behind already in flight
Aperture accesses, so no flushing read is required at the start of
a PTE update sequence.
This issue was reproduced by running
igt/gem_readwrite and
igt/gem_render_copy
simultaneously from different processes, each in a tight loop,
with INTEL_IOMMU enabled.
This patch was originally published as:
drm/i915: Serialize GTT Updates on BXT
[Note: This will cause a performance penalty for some use cases, but
avoiding hangs trumps performance hits. This may need to be worked
around in Mesa to recover the lost performance.]
v2: Move bxt/iommu detection into static function
Remove #ifdef CONFIG_INTEL_IOMMU protection
Make function names more reflective of purpose
Move flushing read into static function
v3: Tidy up for checkpatch.pl
Testcase: igt/gem_concurrent_blit
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: John Harrison <john.C.Harrison@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 0ef34ad622)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull drm displayport quirk support:
"DP quirk for usb c dongles.
As mentioned I have a separate request for fixing a regression, but
also keeping the broken hw working, for certain USB-C DP adapters they
require a minimised n/m parameters, but an attempt to do this
generically has failed, we need to quirk these specific adapters.
However doing it generically regressed some eDP panels.
This pull adds the infrastructure and a quirk for the adapter"
* tag 'drm-dp-quirk-for-v4.12-rc4' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Detect USB-C specific dongles before reducing M and N
drm/dp: start a DPCD based DP sink/branch device quirk database
drm/i915: use drm DP helper to read DPCD desc
drm/dp: add helper for reading DP sink/branch device desc from DPCD
DP sink specific quirks
* tag 'topic/dp-quirks-2017-05-31' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Detect USB-C specific dongles before reducing M and N
drm/dp: start a DPCD based DP sink/branch device quirk database
drm/i915: use drm DP helper to read DPCD desc
drm/dp: add helper for reading DP sink/branch device desc from DPCD
Pull gcc-plugin prepwork from Kees Cook:
"Use designated initializers for mtk-vcodec, powerplay, amdgpu, and
sgi-xp. Use ERR_CAST() to avoid cross-structure cast in ocf2, ntfs,
and NFS.
Christoph Hellwig recommended that I send these fixes now, rather than
waiting for the v4.13 merge window. These are all initializer and cast
fixes needed for the future randstruct plugin that haven't been picked
up by the respective maintainers"
* tag 'gcc-plugins-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mtk-vcodec: Use designated initializers
drm/amd/powerplay: Use designated initializers
drm/amdgpu: Use designated initializers
sgi-xp: Use designated initializers
ocfs2: Use ERR_CAST() to avoid cross-structure cast
ntfs: Use ERR_CAST() to avoid cross-structure cast
NFS: Use ERR_CAST() to avoid cross-structure cast
- Fix a regression to description of exynos_drm_crtc
- Remove preclose hook of Exynos
. This was a exynos change of the patch series[1] merged already.
- Fix one dt broken issue
- Make sure to release bridge_node of Exynos MIPI-DSI driver.
[1] https://lists.freedesktop.org/archives/dri-devel/2017-March/135111.html
* tag 'exynos-drm-fixes-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: clean up description of exynos_drm_crtc
drm/exynos: dsi: Remove bridge node reference in removal
drm/exynos: dsi: Fix the parse_dt function
drm/exynos: Merge pre/postclose hooks
a few fixes for 4.12..
* 'msm-fixes-4.12-rc4' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Fix the check for the command size
drm/msm: Take the mutex before calling msm_gem_new_impl
drm/msm: for array in-fences, check if all backing fences are from our own context before waiting
drm/msm: constify irq_domain_ops
drm/msm/mdp5: release hwpipe(s) for unused planes
drm/msm: Reuse dma_fence_release.
drm/msm: Expose our reservation object when exporting a dmabuf.
drm/msm/gpu: check legacy clk names in get_clocks()
drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state()
drm/msm: select PM_OPP
drm/i915 fixes for v4.12-rc4
* tag 'drm-intel-fixes-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Stop pretending to mask/unmask LPE audio interrupts
drm/i915/selftests: Silence compiler warning in igt_ctx_exec
Revert "drm/i915: Restore lost "Initialized i915" welcome message"
drm/i915/gvt: clean up unsubmited workloads before destroying kmem cache
drm/i915/gvt: Disable compression workaround for Gen9
drm/i915: set initialised only when init_context callback is NULL
drm/i915: Fix new -Wint-in-bool-context gcc compiler warning
drm/i915: use vma->size for appgtt allocate_va_range
drm/i915: Do not sync RCU during shrinking
We need program ring buffer on instance 1 register space domain,
when only if instance 1 available, with two instances or instance 0,
and we need only program instance 0 regsiter space domain for ring.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch to using the common DP helpers instead of using our own.
v2: also remove leftover struct intel_dp_desc (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch removes unnecessary descriptions on
exynos_drm_crtc structure and adds one description
which specifies what pipe_clk member does.
pipe_clk support had been added by below patch without any description,
drm/exynos: add support for pipeline clock to the framework
Commit-id : f26b9343f5
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The dsi + panel is a parental relationship, so OF grpah is not needed.
Therefore, the current dsi_parse_dt function will throw an error,
because there is no linked OF graph for the case fimd + dsi + panel.
Parse the Pll burst and esc clock frequency properties in dsi_parse_dt()
and create a bridge_node only if there is an OF graph associated with dsi.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The overrun check for the size of submitted commands is off by one.
It should allow the offset plus the size to be equal to the
size of the memory object when the command stream is very tightly
constructed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Amongst its other duties, msm_gem_new_impl adds the newly created
GEM object to the shared inactive list which may also be actively
modifiying the list during submission. All the paths to modify
the list are protected by the mutex except for the one through
msm_gem_import which can end up causing list corruption.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[add extra WARN_ON(!mutex_is_locked(&dev->struct_mutex))]
Signed-off-by: Rob Clark <robdclark@gmail.com>
struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Otherwise if someone was using old bindings with "core_clk" instead of
"core" as the clock name, we'd never find it and gpu would be stuck at
27MHz (or whatever it's slowest rate is).
Fixes: 98db803 ("msm/drm: gpu: Dynamically locate the clocks from the device tree")
Signed-off-by: Rob Clark <robdclark@gmail.com>
Otherwise, if nothing else enabled selects it, dev_pm_opp_of_add_table()
will return -ENOTSUPP.
Fixes: e2af8b6 ("drm/msm: gpu: Use OPP tables if we can")
Signed-off-by: Rob Clark <robdclark@gmail.com>
vlv_display_irq_postinstall() enables the LPE audio interrupts
regardless of whether the LPE audio irq chip has masked/unmasked
them. Also the irqchip masking/unmasking doesn't consider the state
of the display power well or the device, and hence just leads to
dmesg spew when it tries to access the hardware while it's powered
down.
If the current way works, then we don't need to do anything in the
mask/unmask hooks. If it doesn't work, well, then we'd need to properly
track whether the irqchip has masked/unmasked the interrupts when
we enable display interrupts. And the mask/unmask hooks would need
to check whether display interrupts are even enabled before frobbing
with he registers.
So let's just assume the current way works and neuter the mask/unmask
hooks. Also clean up vlv_display_irq_postinstall() a bit and stop
it from trying to unmask/enable the LPE C interrupt on VLV since it
doesn't exist.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-4-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit ebf5f92147)
Reference: http://mid.mail-archive.com/874cf6d3-4e45-d4cf-e662-eb972490d2ce@redhat.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
