Christoph Egger 74b86b3d57 Removing dead APM ...

APM doesn't exist in Kconfig, therefore removing all references for it
from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

2010-07-05 17:03:59 +03:00

..

include/mach

OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by the FIQ routine

2010-05-05 11:11:10 -07:00

ams-delta-fiq-handler.S

OMAP1: Amstrad Delta: add FIQ handler for serial keyboardport interrupt processing

2010-05-05 11:11:10 -07:00

ams-delta-fiq.c

OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by the FIQ routine

2010-05-05 11:11:10 -07:00

board-ams-delta.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-fsample.c

omap: mux: Do keypad muxing in board-*.c files

2010-07-05 16:31:39 +03:00

board-generic.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-h2-mmc.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

board-h2.c

Removing dead OMAP_IR

2010-07-05 16:31:53 +03:00

board-h2.h

ARM: OMAP: No need to include board-h2.h from hardware.h

2009-03-23 18:07:33 -07:00

board-h3-mmc.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

board-h3.c

omap: mux: Do keypad muxing in board-*.c files

2010-07-05 16:31:39 +03:00

board-h3.h

ARM: OMAP: No need to include board-h3.h from hardware.h

2009-03-23 18:07:33 -07:00

board-htcherald.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-innovator.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-nokia770.c

Removing dead OMAP_DSP

2010-07-05 16:31:54 +03:00

board-osk.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-palmte.c

Removing dead APM

2010-07-05 17:03:59 +03:00

board-palmtt.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-palmz71.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-perseus2.c

omap: mux: Do keypad muxing in board-*.c files

2010-07-05 16:31:39 +03:00

board-sx1-mmc.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

board-sx1.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

board-voiceblue.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

clock_data.c

OMAP4: clock: Add dummy clock nodes for interface clocks

2010-02-24 17:45:17 -07:00

clock.c

OMAP1 clock: fix section mismatch on clk_init

2010-05-20 12:31:04 -06:00

clock.h

OMAP1 clock: fix section mismatch on clk_init

2010-05-20 12:31:04 -06:00

devices.c

Removing dead OMAP_STI

2010-07-05 17:03:58 +03:00

flash.c

omap: convert boards to use physmap-flash

2010-02-15 10:03:32 -08:00

fpga.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

i2c.c

omap: i2c: Fix muxing for command line enabled bus

2010-02-25 14:45:08 -08:00

id.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

io.c

OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c

2009-12-11 17:00:40 -07:00

irq.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

Kconfig

omap: Make omap specific features appear under Kconfig menu

2010-07-05 16:31:47 +03:00

lcd_dma.c

omap1: LCD_DMA: Use some define rather than a hexadecimal

2009-12-11 16:16:36 -08:00

leds-h2p2-debug.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

leds-innovator.c

[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

2008-08-07 09:55:48 +01:00

leds-osk.c

ARM: OMAP: switch to standard gpio get/set calls

2008-12-10 17:35:25 -08:00

leds.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

leds.h

…

mailbox.c

omap1: mailbox: kill compile warning

2010-02-15 10:03:33 -08:00

Makefile

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00

Makefile.boot

…

mcbsp.c

Removing dead OMAP_DSP

2010-07-05 16:31:54 +03:00

mux.c

Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS

2010-07-05 16:31:53 +03:00

opp_data.c

OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c

2009-12-11 17:00:40 -07:00

opp.h

OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c

2009-12-11 17:00:40 -07:00

pm.c

omap: headers: Move remaining headers from include/mach to include/plat

2009-10-20 09:40:47 -07:00

pm.h

OMAP850: PM: Add an ARCH_OMAP850 check

2009-10-07 23:14:08 +01:00

serial.c

omap: Clean the serial port defines

2010-02-15 08:48:53 -08:00

sleep.S

OMAP7XX: Rename all the rest of the omap730 references in omap1 core

2009-10-07 23:14:06 +01:00

sram.S

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

time.c

OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead

2009-08-28 10:50:33 -07:00

timer32k.c

arm: omap1: remove dead code from timer32k.c

2010-04-22 17:32:36 -07:00

usb.c

omap: Move omap1 USB platform init code into mach-omap1/usb.c

2010-07-05 16:31:30 +03:00