9a76aba02a
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
61 lines
1.9 KiB
Plaintext
61 lines
1.9 KiB
Plaintext
Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
|
|
---------------------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : Should be:
|
|
- "xlnx,zynq-can-1.0" for Zynq CAN controllers
|
|
- "xlnx,axi-can-1.00.a" for Axi CAN controllers
|
|
- "xlnx,canfd-1.0" for CAN FD controllers
|
|
- reg : Physical base address and size of the controller
|
|
registers map.
|
|
- interrupts : Property with a value describing the interrupt
|
|
number.
|
|
- clock-names : List of input clock names
|
|
- "can_clk", "pclk" (For CANPS),
|
|
- "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
|
|
(See clock bindings for details).
|
|
- clocks : Clock phandles (see clock bindings for details).
|
|
- tx-fifo-depth : Can Tx fifo depth (Zynq, Axi CAN).
|
|
- rx-fifo-depth : Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
|
|
sequential Rx mode).
|
|
- tx-mailbox-count : Can Tx mailbox buffer count (CAN FD).
|
|
- rx-mailbox-count : Can Rx mailbox buffer count (CAN FD in mailbox Rx
|
|
mode).
|
|
|
|
|
|
Example:
|
|
|
|
For Zynq CANPS Dts file:
|
|
zynq_can_0: can@e0008000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
clocks = <&clkc 19>, <&clkc 36>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0008000 0x1000>;
|
|
interrupts = <0 28 4>;
|
|
interrupt-parent = <&intc>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
For Axi CAN Dts file:
|
|
axi_can_0: axi-can@40000000 {
|
|
compatible = "xlnx,axi-can-1.00.a";
|
|
clocks = <&clkc 0>, <&clkc 1>;
|
|
clock-names = "can_clk","s_axi_aclk" ;
|
|
reg = <0x40000000 0x10000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 59 1>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
For CAN FD Dts file:
|
|
canfd_0: canfd@40000000 {
|
|
compatible = "xlnx,canfd-1.0";
|
|
clocks = <&clkc 0>, <&clkc 1>;
|
|
clock-names = "can_clk", "s_axi_aclk";
|
|
reg = <0x40000000 0x2000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 59 1>;
|
|
tx-mailbox-count = <0x20>;
|
|
rx-fifo-depth = <0x20>;
|
|
};
|