Dmitry Baryshkov b032fccca8 [ARM] 5083/2: Tosa: fix IrDA transciver powerup. ...

On tosa the tranciver LED isn't powered down if
the GPIO47 (STUART_TX) isn't configured as low-level.
Power it down if IrDA is off to save a bit of power.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2008-07-07 13:21:59 +01:00

..

akita.h

[ARM] 3149/1: SharpSL: Add Akita (SL-C1000) machine support

2005-11-12 18:53:48 +00:00

audio.h

[ALSA] Remove sound/driver.h

2008-01-31 17:29:48 +01:00

bitfield.h

…

camera.h

[ARM] pxa: V4L2 soc_camera driver for PXA270

2008-04-19 17:14:30 +01:00

cm-x270.h

[ARM] 4576/1: CM-X270 machine support

2007-10-15 18:53:57 +01:00

colibri.h

[ARM] 4762/1: Basic support for Toradex Colibri module

2008-01-28 13:13:27 +00:00

corgi.h

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

2008-01-28 13:13:25 +00:00

debug-macro.S

[ARM] Collect 8250-based debug implementations together

2006-03-21 22:05:57 +00:00

dma.h

[ARM] 4576/1: CM-X270 machine support

2007-10-15 18:53:57 +01:00

entry-macro.S

[ARM] 4840/1: pxa: fix the typo in get_irqnr_and_base

2008-02-29 22:47:23 +00:00

gpio.h

gpiolib support for the PXA architecture

2008-02-05 09:44:13 -08:00

gumstix.h

[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards

2008-04-19 11:29:06 +01:00

hardware.h

[ARM] 5047/2: Support resetting by asserting GPIO pin

2008-07-07 13:21:52 +01:00

i2c.h

i2c-pxa: Add polling transfer

2008-01-27 18:14:50 +01:00

idp.h

Don't include linux/config.h from anywhere else in include/

2006-04-26 12:56:16 +01:00

io.h

[ARM] 3631/1: Remove legacy __mem_isa() definitions

2006-06-24 10:34:48 +01:00

irda.h

[ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks

2008-04-19 11:29:08 +01:00

irqs.h

[ARM] 5013/1: Change ITE8152 interrupt numbers

2008-04-24 14:34:25 +01:00

littleton.h

[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)

2008-01-28 13:13:17 +00:00

lpd270.h

[ARM] 3417/1: add support for logicpd pxa270 card engine

2006-03-28 21:08:13 +01:00

lubbock.h

…

magician.h

[ARM] 5009/1: magician: remove to-be-deprecated defines for pxa_gpio_mode

2008-04-21 12:47:49 +01:00

mainstone.h

…

memory.h

[ARM] 4576/1: CM-X270 machine support

2007-10-15 18:53:57 +01:00

mfp-pxa2xx.h

[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}

2008-04-19 11:29:05 +01:00

mfp-pxa3xx.h

[ARM] pxa: make MFP configuration processor independent

2008-01-26 15:07:56 +00:00

mfp-pxa25x.h

[ARM] pxa: add MFP-alike pin configuration support for pxa{25x, 27x}

2008-04-19 11:29:04 +01:00

mfp-pxa27x.h

[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}

2008-04-19 11:29:05 +01:00

mfp-pxa300.h

[ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations

2008-01-26 15:07:56 +00:00

mfp-pxa320.h

[ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations

2008-01-26 15:07:56 +00:00

mfp.h

[ARM] pxa: make MFP configuration processor independent

2008-01-26 15:07:56 +00:00

mmc.h

[ARM] pxa: mmc: add 3rd host controller support for pxa310

2008-01-26 15:07:53 +00:00

mtd-xip.h

…

ohci.h

[ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget

2006-06-08 22:44:07 +01:00

pcm027.h

[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module

2008-01-28 13:13:20 +00:00

pcm990_baseboard.h

[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270

2008-01-28 13:13:24 +00:00

pm.h

[ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle.

2008-05-04 11:06:05 +01:00

poodle.h

[ARM] 3594/1: Poodle: Add touchscreen support + other updates

2006-06-19 20:46:05 +01:00

pxa2xx_spi.h

[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()

2008-01-26 15:07:52 +00:00

pxa2xx-gpio.h

[ARM] pxa: V4L2 soc_camera driver for PXA270

2008-04-19 17:14:30 +01:00

pxa2xx-regs.h

[ARM] pxa: move memory controller registers into pxa2xx-regs.h

2008-01-26 15:07:54 +00:00

pxa3xx_nand.h

[MTD] [NAND] support for pxa3xx

2008-04-22 19:27:27 +01:00

pxa3xx-regs.h

[ARM] 4830/1: Add support for the CLK_POUT pin on PXA3xx CPUs

2008-04-19 11:29:02 +01:00

pxa27x_keypad.h

[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()

2008-04-19 11:29:05 +01:00

pxa-regs.h

pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}

2008-04-30 08:29:31 -07:00

pxafb.h

pxafb: preliminary smart panel interface support

2008-04-30 08:29:32 -07:00

regs-lcd.h

pxafb: preliminary smart panel interface support

2008-04-30 08:29:32 -07:00

regs-ssp.h

spi: pxa2xx_spi clock polarity fix

2008-02-23 17:12:14 -08:00

sharpsl.h

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

2008-01-28 13:13:25 +00:00

spitz.h

[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix

2008-01-28 13:13:25 +00:00

ssp.h

[ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free()

2008-01-26 15:07:51 +00:00

system.h

[ARM] 5047/2: Support resetting by asserting GPIO pin

2008-07-07 13:21:52 +01:00

timex.h

[ARM] pxa: PXA3xx base support

2007-10-15 18:53:43 +01:00

tosa.h

[ARM] 5083/2: Tosa: fix IrDA transciver powerup.

2008-07-07 13:21:59 +01:00

trizeps4.h

[ARM] 3666/1: TRIZEPS4 [1/5] core

2006-06-29 16:25:37 +01:00

udc.h

USB: pxa2xx_udc: use generic gpio layer

2007-07-12 16:34:42 -07:00

uncompress.h

[ARM] 4718/1: Fix redefinition warnings in PXA uncompressor code

2008-01-26 15:07:52 +00:00

vmalloc.h

…

zylonite.h

[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line

2008-04-19 11:29:09 +01:00