1
0
Files
linux/drivers
Boris Brezillon dbc44edbf8 mtd: rawnand: micron: Fix on-die ECC detection logic
Basing the "mandatory on-die" detection on ID byte 2 does not work,
because Micron has plenty of NANDs using the same device ID code, and
not all of them have forcibly enabled on-die ECC.

Since the "Array Operation" feature does not provide the "ECC
enabled/disabled" bit when the ECC can't be disabled, let's try to use
the "ECC enabled/disabled" bit in the READ_ID bytes.

It seems that this bit is dynamically updated on NANDs where on-die ECC
can freely be enabled/disabled, so let's hope it stays at one when we
have a NAND with on-die ECC forcibly enabled.

Fixes: 51f3b3970a8c ("mtd: rawnand: micron: detect forced on-die ECC")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-19 23:14:14 +02:00
..
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-25 09:41:37 +02:00
2018-06-15 18:10:01 -03:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-16 16:40:36 -07:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-25 21:36:45 +08:00
2018-06-12 16:19:22 -07:00
2018-06-15 18:10:01 -03:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00
2018-06-12 16:19:22 -07:00