sugar/linux
1
0
Fork 0
Code Activity
Files
ed03033e3033c98e83d45bf4cdca1efdfd86e98e
linux/drivers/net/wireless/ath/ath9k
History
John W. Linville 855df36de3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-06-25 15:26:36 -04:00
..
ahb.c
ath9k: fix race in setting ATH_OP_INVALID
2014-04-24 21:46:22 -04:00
ani.c
ath9k_hw: do not lower ANI setting below default on AR913x
2014-04-30 11:39:54 -04:00
ani.h
ath9k_hw: tweak noise immunity thresholds for older chipsets
2014-03-03 15:35:55 -05:00
antenna.c
ath9k: add support for reporting per-chain signal strength
2013-12-18 15:23:19 -05:00
ar953x_initvals.h
ath9k_hw: fix worse EVM for 11b rates
2014-04-30 12:13:16 -04:00
ar955x_1p0_initvals.h
ath9k: Remove AR955x INI duplicates
2013-12-09 15:37:57 -05:00
ar5008_initvals.h
…
ar5008_phy.c
ath9k_hw: reduce ANI firstep range for older chips
2014-04-09 13:55:55 -04:00
ar9001_initvals.h
…
ar9002_calib.c
ath9k_hw: remove IS_CHAN_B()
2013-10-14 13:39:58 -04:00
ar9002_hw.c
ath9k: Register supported HW hang checks
2014-01-03 15:36:57 -05:00
ar9002_initvals.h
…
ar9002_mac.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-01-06 14:08:41 -05:00
ar9002_phy.c
ath9k_hw: simplify spur channel handling
2013-12-18 15:23:27 -05:00
ar9002_phy.h
…
ar9003_2p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h
ath9k: Use a separate TX gain table for WZR-HP-G450H
2013-12-09 15:37:58 -05:00
ar9003_calib.c
ath9k: Calculate IQ-CAL median
2014-02-12 15:36:08 -05:00
ar9003_eeprom.c
ath9k: Fix temperature compensation
2014-03-17 13:44:16 -04:00
ar9003_eeprom.h
ath9k: Update BaseExtension_1 eeprom structure
2013-12-18 15:23:44 -05:00
ar9003_hw.c
ath9k: Initialize QCA953x INI arrays
2014-01-03 15:37:00 -05:00
ar9003_mac.c
ath9k: move ath9k_debug_sync_cause out of ath9k_hw
2013-12-19 14:41:56 -05:00
ar9003_mac.h
…
ar9003_mci.c
ath9k: Use bitops for calibration flags
2013-09-26 15:13:47 -04:00
ar9003_mci.h
…
ar9003_paprd.c
…
ar9003_phy.c
ath9k: do not set half/quarter channel flags in AR_PHY_MODE
2014-02-24 15:38:38 -05:00
ar9003_phy.h
ath9k: Fix regulatory compliance
2014-01-03 15:37:01 -05:00
ar9003_rtt.c
ath9k: Fix PeakDetect calibration for AR9462
2013-09-26 15:13:47 -04:00
ar9003_rtt.h
…
ar9003_wow.c
ath9k: Fix wow.c compilation
2013-12-02 14:24:53 -05:00
ar9330_1p1_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ar9340_initvals.h
ath9k_hw: fix worse EVM for 11b rates
2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h
ath9k: Fix ETSI compliance for AR9462 2.0
2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h
ath9k: Remove duplicate initvals for AR9462 v2.1
2013-12-02 14:25:02 -05:00
ar9485_initvals.h
ath9k: Identify duplicate AR9485 initvals
2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h
ath9k: Identify duplicate AR9565 v1.0 initvals
2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h
ath9k: Add initvals for AR9565 1.1
2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h
ath9k_hw: update ar9300 initvals
2014-04-30 12:13:15 -04:00
ath9k.h
ath9k: use separate HW queue for each channel context
2014-06-19 15:49:20 -04:00
beacon.c
ath9k: Add periodic NoA support
2014-06-19 15:49:20 -04:00
btcoex.c
ath9k_hw: clean up generic timer code
2013-12-18 15:23:22 -05:00
btcoex.h
…
calib.c
ath9k: add noise floor parameter to ath9k_hw_getchan_noise
2013-10-18 14:03:53 -04:00
calib.h
ath9k: add noise floor parameter to ath9k_hw_getchan_noise
2013-10-18 14:03:53 -04:00
channel.c
ath9k: Add recovery mechanism for hw TSF timer
2014-06-19 15:49:20 -04:00
common-beacon.c
ath9k: move ath9k_beacon_config_ap common
2014-03-17 13:13:08 -04:00
common-beacon.h
ath9k: move ath9k_beacon_config_ap common
2014-03-17 13:13:08 -04:00
common-debug.c
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-debug.h
ath9k: move phy_err to ath9k_cmn_debug_phy_err
2014-05-13 15:56:42 -04:00
common-init.c
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common-init.h
ath9k: move ath9k_reload_chainmask_settings to common
2014-02-28 14:33:16 -05:00
common.c
ath9k: move ath9k_rx_skb_postprocess to common.c
2014-02-12 15:36:01 -05:00
common.h
ath9k-common: create common-debug and move modal_eeprom to cmn
2014-05-13 15:56:36 -04:00
debug_sta.c
ath9k: remove tid->paused flag
2014-04-30 11:42:35 -04:00
debug.c
ath9k: Summarize hw state per channel context
2014-06-19 15:49:18 -04:00
debug.h
ath9k & ath9k_htc: move ath_rx_stats to cmn
2014-05-13 15:56:40 -04:00
dfs_debug.c
ath9k: dfs_debug fix possible NULL dereference
2013-11-11 14:42:43 -05:00
dfs_debug.h
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.c
ath9k: simplify DFS pulse interval debug printing
2014-05-29 13:08:10 -04:00
dfs.h
ath9k/ath: move dfs pattern detector to ath
2013-10-18 14:03:54 -04:00
eeprom_4k.c
ath9k_hw: simplify spur channel handling
2013-12-18 15:23:27 -05:00
eeprom_9287.c
ath9k_hw: simplify spur channel handling
2013-12-18 15:23:27 -05:00
eeprom_def.c
ath9k_hw: simplify spur channel handling
2013-12-18 15:23:27 -05:00
eeprom.c
…
eeprom.h
…
gpio.c
ath9k_hw: clean up generic timer code
2013-12-18 15:23:22 -05:00
hif_usb.c
ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P
2014-02-12 15:36:04 -05:00
hif_usb.h
…
htc_drv_beacon.c
ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init
2014-03-17 13:13:09 -04:00
htc_drv_debug.c
ath9k_htc: use ath9k_cmn_debug_phy_err
2014-05-13 15:56:43 -04:00
htc_drv_gpio.c
ath9k_htc: reconfigure led_gpios after resume
2013-12-18 15:23:02 -05:00
htc_drv_init.c
ath9k_htc: sync beacon slot code with ath9k
2014-03-17 13:13:06 -04:00
htc_drv_main.c
ath9k_htc: Stop ANI before doing hw_reset
2014-05-14 15:42:46 -04:00
htc_drv_txrx.c
ath9k & ath9k_htc: move ath_rx_stats to cmn
2014-05-13 15:56:40 -04:00
htc_hst.c
ath9k_htc: catch fw panic pattern
2014-02-12 15:36:03 -05:00
htc_hst.h
ath9k_htc: catch fw panic pattern
2014-02-12 15:36:03 -05:00
htc.h
ath9k: fixup "ath9k_htc: fix build with disabled debug"
2014-05-20 15:36:15 -04:00
hw-ops.h
ath9k: Move private HW callbacks to hw-ops.h
2014-01-03 15:36:58 -05:00
hw.c
ath9k: save tsf in channel context
2014-06-19 15:49:18 -04:00
hw.h
ath9k: save tsf in channel context
2014-06-19 15:49:18 -04:00
init.c
ath9k: Advertise multichannel support
2014-06-19 15:49:20 -04:00
Kconfig
ath9k: Remove ath9k rate control
2014-02-12 15:36:04 -05:00
link.c
ath9k: Move beacon config to channel context
2014-06-19 15:49:18 -04:00
mac.c
ath9k_hw: Abort transmission for sleeping station
2014-05-19 16:42:15 -04:00
mac.h
ath9k_hw: Abort transmission for sleeping station
2014-05-19 16:42:15 -04:00
main.c
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-06-25 15:26:36 -04:00
Makefile
ath9k: Add channel context structure
2014-06-19 15:49:16 -04:00
mci.c
ath9k: Move caldata into channel context
2014-06-19 15:49:18 -04:00
mci.h
…
pci.c
ath9k: Implement hw_scan support
2014-06-19 15:49:17 -04:00
phy.h
…
recv.c
ath9k: Adjust AP beacon tsf based on station context
2014-06-19 15:49:19 -04:00
reg.h
ath9k_hw: Abort transmission for sleeping station
2014-05-19 16:42:15 -04:00
spectral.c
ath9k: fix sparse non static symbol warning
2014-01-03 15:36:56 -05:00
spectral.h
ath9k: Cleanup spectral scan code
2013-12-18 15:23:37 -05:00
tx99.c
ath9k: Implement channel context ops
2014-06-19 15:49:17 -04:00
wmi.c
…
wmi.h
ath9k: mark wmi_event_swba as __packed
2013-09-26 15:13:48 -04:00
wow.c
ath9k: Add channel context worker thread
2014-06-19 15:49:17 -04:00
xmit.c
ath9k: use separate HW queue for each channel context
2014-06-19 15:49:20 -04:00