sugar/linux
1
0
Fork 0
Code Activity

leds: leds-st1202: Spacing and proofreading editing

Browse Source 
Minor edits regarding use of spacing and proofreading.

There is a minor inconsistency in the use of spacing as margin in
one of the comments providing details about the datasheet.

There is also a typo that comes from the datasheet itself.

Change spacing on comment and correct typo.

Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB547333EFFFBFFA840225BC02C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
This commit is contained in:
Manuel Fombuena
2025-02-26 17:08:44 +00:00
committed by Lee Jones
parent a17d9e736d
commit 5d0e4816a9
1 changed files with 5 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/leds/leds-st1202.c
View File

@@ -99,9 +99,9 @@ static int st1202_pwm_pattern_write(struct st1202_chip *chip, int led_num,
value_h = (u8)(value >> 8);
/*
* Datasheet: Register address low = 1Eh + 2*(xh) + 18h*(yh),
* where x is the channel number (led number) in hexadecimal (x = 00h .. 0Bh)
* and y is the pattern number in hexadecimal (y = 00h .. 07h)
* Datasheet: Register address low = 1Eh + 2*(xh) + 18h*(yh),
* where x is the channel number (led number) in hexadecimal (x = 00h .. 0Bh)
* and y is the pattern number in hexadecimal (y = 00h .. 07h)
*/
ret = st1202_write_reg(chip, (ST1202_PATTERN_PWM + (led_num * 2) + 0x18 * pattern),
value_l);
@@ -298,8 +298,8 @@ static int st1202_setup(struct st1202_chip *chip)
guard(mutex)(&chip->lock);
/*
* Once the supply voltage is applied, the LED1202 executes some internal checks,
* afterwords it stops the oscillator and puts the internal LDO in quiescent mode.
* Once the supply voltage is applied, the LED1202 executes some internal checks.
* Afterwards, it stops the oscillator and puts the internal LDO in quiescent mode.
* To start the device, EN bit must be set inside the “Device Enable” register at
* address 01h. As soon as EN is set, the LED1202 loads the adjustment parameters
* from the internal non-volatile memory and performs an auto-calibration procedure