1
0

gpio: ich: use new line value setter callbacks

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-12-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This commit is contained in:
Bartosz Golaszewski
2025-04-07 09:13:21 +02:00
committed by Bartosz Golaszewski
parent f3592d252f
commit f74195d4b2

View File

@@ -175,12 +175,16 @@ static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr)
static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned int nr,
int val)
{
int ret;
/* Disable blink hardware which is available for GPIOs from 0 to 31. */
if (nr < 32 && ichx_priv.desc->have_blink)
ichx_write_bit(GPO_BLINK, nr, 0, 0);
/* Set GPIO output value. */
ichx_write_bit(GPIO_LVL, nr, val, 0);
ret = ichx_write_bit(GPIO_LVL, nr, val, 0);
if (ret)
return ret;
/*
* Try setting pin as an output and verify it worked since many pins
@@ -252,9 +256,9 @@ static int ich6_gpio_request(struct gpio_chip *chip, unsigned int nr)
return ichx_gpio_request(chip, nr);
}
static void ichx_gpio_set(struct gpio_chip *chip, unsigned int nr, int val)
static int ichx_gpio_set(struct gpio_chip *chip, unsigned int nr, int val)
{
ichx_write_bit(GPIO_LVL, nr, val, 0);
return ichx_write_bit(GPIO_LVL, nr, val, 0);
}
static void ichx_gpiolib_setup(struct gpio_chip *chip)
@@ -269,7 +273,7 @@ static void ichx_gpiolib_setup(struct gpio_chip *chip)
chip->get = ichx_priv.desc->get ?
ichx_priv.desc->get : ichx_gpio_get;
chip->set = ichx_gpio_set;
chip->set_rv = ichx_gpio_set;
chip->get_direction = ichx_gpio_get_direction;
chip->direction_input = ichx_gpio_direction_input;
chip->direction_output = ichx_gpio_direction_output;