The buffer is first zeroed out by memset(). Then strncpy() is
used to fill the content. The strncpy() function also pads the
string till the end of the specified length, which is redundant.
The strncpy() does not ensures that the string will be properly
closed with 0. Use strlcpy() instead.
The semantic match that finds this kind of pattern is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression buffer;
expression size;
expression str;
@@
memset(buffer, 0, size);
...
- strncpy(
+ strlcpy(
buffer, str, sizeof(buffer)
);
@@
expression buffer;
expression size;
expression str;
@@
memset(&buffer, 0, size);
...
- strncpy(
+ strlcpy(
&buffer, str, sizeof(buffer));
@@
expression buffer;
identifier field;
expression size;
expression str;
@@
memset(buffer, 0, size);
...
- strncpy(
+ strlcpy(
buffer->field, str, sizeof(buffer->field)
);
@@
expression buffer;
identifier field;
expression size;
expression str;
@@
memset(&buffer, 0, size);
...
- strncpy(
+ strlcpy(
buffer.field, str, sizeof(buffer.field));
// </smpl>
On strncpy() vs strlcpy() see
http://www.gratisoft.us/todd/papers/strlcpy.html .
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B086547.5040100@freemail.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
mem-memcpy.c uses perf event system calls to obtain CPU clocks.
And it suddenly dies with BUG_ON() when it running on Linux
doesn't support perf event.
Also fail at calloc() can occur easily when too large
length is passed. Fail of calloc() causes sudden death
with assert().
These behaviours are not friendly. So I fixed the treating of
errors.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258688237-3797-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v2: improved a few small details ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we commit a trace to perf, we first check if we are
recursing in the same buffer so that we don't mess-up the buffer
with a recursing trace. But later on, we do the same check from
perf to avoid commit recursion. The recursion check is desired
early before we touch the buffer but we want to do this check
only once.
Then export the recursion protection from perf and use it from
the trace events before submitting a trace.
v2: Put appropriate Reported-by tag
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
ceph_lookup_snap_realm either returns a valid pointer or NULL; there is no
need to check IS_ERR(result).
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
If the NULL test is necessary, then the dereference should be moved below
the NULL test.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/).
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
o Along with netdev->perm_addr, mac address will be
maintained in device private structure.
o Device limitation: We need to set mac address when ever
interface comes up.
In ALB/TAL mode, bonding driver calls set_mac for all slave with bond mac address.
But bonding driver set netdev->dev_addr field to its original value,
after enslaving interfaces.
When ever active slave changes, it swap dev_addr of inactive slave with active.
Yet it doesn't notify driver about change in netdev->dev_addr.
As netxen driver need to set mac addr when ever interface comes up,
it can't rely on netdev->dev_addr field. Specially in case of bonding mode ALB/TLB.
Signed-off-by: Narender Kumar <narender.kumar@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel crashes, if promisc mode set without disabling rx queue.
Before changing mode in NX2031 chip, wait till rx queue drains.
Signed-off-by: Narender Kumar <narender.kumar@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid resetting memory during initialization, skip this memory
block during driver probe.
Signed-off-by: Amit Kumar Salecha <amit@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Tx unit hang detection code in e1000e detects other hangs caused by
hardware components (e.g. Rx, DMA units), but it is not possible to detect
exactly which component is hung so it has always assumed a Tx unit hang.
When dumping a message to the system log because of a hang, this patch adds
more data to help narrow the cause of the issue and makes the message
non-Tx-specific. Because this new code reads PHY registers which can
sleep, move it off to a workqueue. This and all previously existing work
tasks in the driver are now cancelled when the driver is removed.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A failure to initialize the identification LED is not a fatal condition and
should allow the init path to continue.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was pointed out a pm_qos DMA latency requirement set when the driver is
loaded when parts that support early receive of jumbo frames are probed
could have that requirement overidden if another part supported by the
driver (one that does not support early receive of jumbo frames) is probed
later. Change the DMA latency requirement to be per-interface if needed
instead of per driver.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The e1000_clear_hw_cntrs_*() functions read the registers to clear them.
There is no reason to save the register contents so the temp variable can
be removed.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set booleans to 'true' or 'false' to make it clear it is a boolean. Also
change instances of TRUE/FALSE in comments to lowercase true/false.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy and nvm operations structures have function pointers that contain
"phy" and "nvm" in the pointer names which are redundant since the
structures are already obviously in phy and nvm structures.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver was only updating MII stats when an LSC up was detected and
the interface had not already been reported up to netdev. This meant
MII stats returned in response to an SIOCGMIIREG ioctl would always
show a link up if it had ever been up. This was misleading the networking
daemon guessnet, which uses this ioctl, into making improper network port
selections.
This fix adds a call to e1000_phy_read_status() to actively read the
mii stats before responding to the SIOCGMIIREG ioctl.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When performing the ethtool PHY loopback test on PCH-based LOMs (82577 and
82578), disable K1 (a MAC-PHY interconnect low power mode) otherwise
packets might get corrupted.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Copper links with WoL or management enabled (any condition which prevents
the phy from being powered down when the interface is taken down) were
always reporting link-up when the interface had been taken down. This
is because when the interface is taken down (ifconfig ethx down),
interrupts are disabled. With no interrupts, there is no LSC interrupt,
which is normally required to set "get_link_status", which instructs the
driver to query the device for link state. The fix is to force
get_link_status to true if the interface is not up.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clearing the interrupt timers following an IMS clear has the unwanted
side-effect of flushing all descriptors immediately following a partial
write when interrupts are disabled.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests for 82583 in a couple ethtool functions that were missed from the
initial hardware enablement submission.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting WoL feature, check the supplied modes are all supported rather
than checking for no support. This way, if any new modes are added the
driver does not default to not complaining about it if we don't really
support it.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
That's extremely non-intuitive, noticed by William Allen Simpson.
And let's make the default be on, it's been suggested by a lot of
people so we'll give it a try.
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows i2c-pnx to free its interrupt handler when the module
is removed or if an error occurs; using the same dev_id for both
request_irq and free_irq is desirable.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Remove the snd_card pointer from the snd_miro structure and
do some small code improvements.
Also, move Opti chipset detection before detection of the
ACI mixer, so the mci_base value is set in one place only.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CONFIG_SND_JACK needs to be selected explicitly only when INPUT=y or
INPUT_SND. The current way, INPUT=SND_HDA_INTEL isn't strict enough.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It better propagate errors, also if we do a simple:
[root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ;
perf trace [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ]
Fatal: not an trace data file
[root@doppio linux-2.6-tip]#
That is what is expected, right? I.e. as we didn't specify any
tracepoint event via -e, it should gracefully bail out and not
SEGFAULT.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org>
[ Fixed the error messages some more ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We better call this routine after both the kernel and modules
are loaded, because as it was if there weren't modules it would not
be called, resulting in kernel_map->end remaining at zero, so no
map would be found and consequently the kernel symtab wouldn't
get loaded, i.e. no kernel symbols would be resolved.
Also this fixes another case, that is when we _have_ modules,
but the last map would have its ->end address not set before we
loaded its symbols, which would never happen because ->end was
not set.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch fixes the default watermark value for the sampling
buffer. With the existing calculation (watermark =
max(PAGE_SIZE, max_size / 2)), no notification was ever received
when the buffer was exactly 1 page. This was because you would
never cross the threshold (there is no partial samples).
In certain configuration, there was no possibilty detecting the
problem because there was not enough space left to store the
LOST record.In fact, there may be a more generic problem here.
The kernel should ensure that there is alaways enough space to
store one LOST record.
This patch sets the default watermark to half the buffer size.
With such limit, we are guaranteed to get a notification even
with a single page buffer assuming no sample is bigger than a
page.
Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212509.344964101@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1256302576-6169-1-git-send-email-eranian@gmail.com>
Most sites updating ctx->time and event times do so under
ctx->lock, make sure they all do.
This was made possible by removing the __perf_event_read() call
from __perf_event_sync_stat(), which already had this lock
taken.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212509.102316434@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cpuctx is always active, task context is always active for
current
the previous condition verifies that if its a task context its
for current, hence we can assume ctx->is_active.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212509.000272254@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Removes constraints from __perf_event_read() by leaving it with
a single callsite; this callsite had ctx->lock held, the other
one does not.
Removes some superfluous code from __perf_event_sync_stat().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212508.918544317@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove an update_context_time() call from the
perf_event_task_sched_out() path and into the branch its needed.
The call was both superfluous, because __perf_event_sched_out()
already does it, and wrong, because it was done without holding
ctx->lock.
Place it in perf_event_sync_stat(), which is the only place it
is needed and which does already hold ctx->lock.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091120212508.779516394@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
